Hi all, I am trying to create a glusterfs setup. I am struggling by adding a node to the cluster. I do: gluster peer probe 192.168.0.4 State: Accepted peer request (Connected) ---------------- [root@gluster1 ~]# gluster peer probe 192.168.41.4 peer probe: success. [root@gluster1 ~]# gluster peer status Number of Peers: 1 Hostname: 192.168.41.4 Uuid: d037d73b-18d2-4dbd-addf-5cc4dc301fea State: Accepted peer request (Connected) ---------------- On second host: ---------------- [root@gluster2 ~]# gluster peer status Number of Peers: 1 Hostname: 192.168.30.10 Uuid: 1ca5121e-93e7-4e5d-a6d8-cb8ca904685d State: Accepted peer request (Disconnected) ---------------- And it will stay forever in this state. There is a firewall in-between but with tcpdump I can see packets traveling between the two hosts. No NAT and no filtering in-between. Any clue how to troubleshoot? System is a ClearOS 6 box. Similar to RHEL. Thanks! Christian _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
