Re: Gluster volume not automounted when peer is down

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A much simpler answer is to assign a hostname to multiple IP addresses (round robin dns). When gethostbyname() returns multiple entries, the client will try them all until it's successful.

On 11/24/2014 06:23 PM, Paul Robert Marino wrote:
This is simple and can be handled in many ways.

Some background first.
The mount point is a single IP or host name. The only thing the client uses it for is to download a describing all the bricks in the cluster. The next thing is it opens connections to all the nodes containing bricks for that volume.

So the answer is tell the client to connect to a virtual IP address.

I personally use keepalived for this but you can use any one of the many IPVS Or other tools that manage IPS for this.  I assign the VIP to a primary node then have each node monitor the cluster processes if they die on a node it goes into a faulted state and can not own the VIP.

As long as the client are connecting to a running host in the cluster you are fine even if that host doesn't own bricks in the volume but is aware of them as part of the cluster.
-- Sent from my HP Pre3


On Nov 24, 2014 8:07 PM, Eric Ewanco <Eric.Ewanco@xxxxxxxxxxx> wrote:

Hi all,

 

We’re trying to use gluster as a replicated volume.  It works OK when both peers are up but when one peer is down and the other reboots, the “surviving” peer does not automount glusterfs.  Furthermore, after the boot sequence is complete, it can be mounted without issue.  It automounts fine when the peer is up during startup.  I tried to google this and while I found some similar issues, I haven’t found any solutions to my problem.  Any insight would be appreciated.  Thanks.

 

gluster volume info output (after startup):

Volume Name: rel-vol

Type: Replicate

Volume ID: 90cbe313-e9f9-42d9-a947-802315ab72b0

Status: Started

Number of Bricks: 1 x 2 = 2

Transport-type: tcp

Bricks:

Brick1: 10.250.1.1:/export/brick1

Brick2: 10.250.1.2:/export/brick1

 

gluster peer status output (after startup):

Number of Peers: 1

 

Hostname: 10.250.1.2

Uuid: 8d49b929-4660-4b1e-821b-bfcd6291f516

State: Peer in Cluster (Disconnected)

 

Original volume create command:

gluster volume create rel-vol rep 2 transport tcp 10.250.1.1:/export/brick1 10.250.1.2:/export/brick1

 

I am running Gluster 3.4.5 on OpenSuSE 12.2.

gluster --version:

glusterfs 3.4.5 built on Jul 25 2014 08:31:19

Repository revision: git://git.gluster.com/glusterfs.git

Copyright (c) 2006-2011 Gluster Inc. <http://www.gluster.com>

GlusterFS comes with ABSOLUTELY NO WARRANTY.

You may redistribute copies of GlusterFS under the terms of the GNU General Public License.

 

The fstab line is:

 

localhost:/rel-vol              /home        glusterfs  defaults,_netdev      0 0

 

lsof -i :24007-24100:

COMMAND    PID USER   FD   TYPE DEVICE SIZE/OFF NODE NAME

glusterd  4073 root    6u  IPv4  82170      0t0  TCP s1:24007->s1:1023 (ESTABLISHED)

glusterd  4073 root    9u  IPv4  13816      0t0  TCP *:24007 (LISTEN)

glusterd  4073 root   10u  IPv4  88106      0t0  TCP s1:exp2->s2:24007 (SYN_SENT)

glusterfs 4097 root    8u  IPv4  16751      0t0  TCP s1:1023->s1:24007 (ESTABLISHED)

 

This is shorter than it is when it works, but maybe that’s because the mount spawns some more processes.

 

Some ports are down:

 

root@q50-s1:/root> telnet localhost 24007

Trying ::1...

telnet: connect to address ::1: Connection refused

Trying 127.0.0.1...

Connected to localhost.

Escape character is '^]'.

 

telnet> close

Connection closed.

root@q50-s1:/root> telnet localhost 24009

Trying ::1...

telnet: connect to address ::1: Connection refused

Trying 127.0.0.1...

telnet: connect to address 127.0.0.1: Connection refused

ps axww | fgrep glu:

4073 ?        Ssl    0:10 /usr/sbin/glusterd -p /run/glusterd.pid

4097 ?        Ssl    0:00 /usr/sbin/glusterfsd -s 10.250.1.1 --volfile-id rel-vol.10.250.1.1.export-brick1 -p /var/lib/glusterd/vols/rel-vol/run/10.250.1.1-export-brick1.pid -S /var/run/89ba432ed09e07e107723b4b266e18f9.socket --brick-name /export/brick1 -l /var/log/glusterfs/bricks/export-brick1.log --xlator-option *-posix.glusterd-uuid=3b02a581-8fb9-4c6a-8323-9463262f23bc --brick-port 49152 --xlator-option rel-vol-server.listen-port=49152

5949 ttyS0    S+     0:00 fgrep glu

These are the error messages I see in /var/log/gluster/home.log (/home is the mountpoint):

+------------------------------------------------------------------------------+

[2014-11-24 13:51:27.932285] E [client-handshake.c:1742:client_query_portmap_cbk] 0-rel-vol-client-0: failed to get the port number for remote subvolume. Please run 'gluster volume status' on server to see if brick process is running.

[2014-11-24 13:51:27.932373] W [socket.c:514:__socket_rwv] 0-rel-vol-client-0: readv failed (No data available)

[2014-11-24 13:51:27.932405] I [client.c:2098:client_rpc_notify] 0-rel-vol-client-0: disconnected

[2014-11-24 13:51:30.818281] E [socket.c:2157:socket_connect_finish] 0-rel-vol-client-1: connection to 10.250.1.2:24007 failed (No route to host)

[2014-11-24 13:51:30.818313] E [afr-common.c:3735:afr_notify] 0-rel-vol-replicate-0: All subvolumes are down. Going offline until atleast one of them comes back up.

[2014-11-24 13:51:30.822189] I [fuse-bridge.c:4771:fuse_graph_setup] 0-fuse: switched to graph 0

[2014-11-24 13:51:30.822245] W [socket.c:514:__socket_rwv] 0-rel-vol-client-1: readv failed (No data available)

[2014-11-24 13:51:30.822312] I [fuse-bridge.c:3726:fuse_init] 0-glusterfs-fuse: FUSE inited with protocol versions: glusterfs 7.13 kernel 7.18

[2014-11-24 13:51:30.822562] W [fuse-bridge.c:705:fuse_attr_cbk] 0-glusterfs-fuse: 2: LOOKUP() / => -1 (Transport endpoint is not connected)

[2014-11-24 13:51:30.835120] I [fuse-bridge.c:4630:fuse_thread_proc] 0-fuse: unmounting /home

[2014-11-24 13:51:30.835397] W [glusterfsd.c:1002:cleanup_and_exit] (-->/lib64/libc.so.6(clone+0x6d) [0x7f00f0f682bd] (-->/lib64/libpthread.so.0(+0x7e0e) [0x7f0

0f1603e0e] (-->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xc5) [0x4075f5]))) 0-: received signum (15), shutting down

[2014-11-24 13:51:30.835416] I [fuse-bridge.c:5262:fini] 0-fuse: Unmounting '/home'.

 

Relevant section from /var/log/glusterfs/etc-glusterfs-glusterd.vol.log:

 

[2014-11-24 13:51:27.552371] I [glusterfsd.c:1910:main] 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.4.5 (/usr/sbin/glusterd -p /run/glusterd.pid)

[2014-11-24 13:51:27.574553] I [glusterd.c:961:init] 0-management: Using /var/lib/glusterd as working directory

[2014-11-24 13:51:27.577734] I [socket.c:3480:socket_init] 0-socket.management: SSL support is NOT enabled

[2014-11-24 13:51:27.577756] I [socket.c:3495:socket_init] 0-socket.management: using system polling thread

[2014-11-24 13:51:27.577834] E [rpc-transport.c:253:rpc_transport_load] 0-rpc-transport: /usr/lib64/glusterfs/3.4.5/rpc-transport/rdma.so: cannot open shared object file: No such file or directory

[2014-11-24 13:51:27.577849] W [rpc-transport.c:257:rpc_transport_load] 0-rpc-transport: volume 'rdma.management': transport-type 'rdma' is not valid or not found on this machine

[2014-11-24 13:51:27.577858] W [rpcsvc.c:1389:rpcsvc_transport_create] 0-rpc-service: cannot create listener, initing the transport failed

[2014-11-24 13:51:27.578697] I [glusterd.c:354:glusterd_check_gsync_present] 0-glusterd: geo-replication module not installed in the system

[2014-11-24 13:51:27.598907] I [glusterd-store.c:1339:glusterd_restore_op_version] 0-glusterd: retrieved op-version: 2

[2014-11-24 13:51:27.607802] E [glusterd-store.c:1858:glusterd_store_retrieve_volume] 0-: Unknown key: brick-0

[2014-11-24 13:51:27.607837] E [glusterd-store.c:1858:glusterd_store_retrieve_volume] 0-: Unknown key: brick-1

[2014-11-24 13:51:27.809027] I [glusterd-handler.c:2818:glusterd_friend_add] 0-management: connect returned 0

[2014-11-24 13:51:27.809098] I [rpc-clnt.c:962:rpc_clnt_connection_init] 0-management: setting frame-timeout to 600

[2014-11-24 13:51:27.809150] I [socket.c:3480:socket_init] 0-management: SSL support is NOT enabled

[2014-11-24 13:51:27.809162] I [socket.c:3495:socket_init] 0-management: using system polling thread

[2014-11-24 13:51:27.813801] I [glusterd.c:125:glusterd_uuid_init] 0-management: retrieved UUID: 3b02a581-8fb9-4c6a-8323-9463262f23bc

Given volfile:

+------------------------------------------------------------------------------+

  1: volume management

  2:     type mgmt/glusterd

  3:     option working-directory /var/lib/glusterd

  4:     option transport-type socket,rdma

  5:     option transport.socket.keepalive-time 10

  6:     option transport.socket.keepalive-interval 2

  7:     option transport.socket.read-fail-log off

  8: #   option base-port 49152

  9: end-volume

+------------------------------------------------------------------------------+

[2014-11-24 13:51:30.818283] E [socket.c:2157:socket_connect_finish] 0-management: connection to 10.250.1.2:24007 failed (No route to host)

[2014-11-24 13:51:30.820254] I [rpc-clnt.c:962:rpc_clnt_connection_init] 0-management: setting frame-timeout to 600

[2014-11-24 13:51:30.820316] I [socket.c:3480:socket_init] 0-management: SSL support is NOT enabled

[2014-11-24 13:51:30.820327] I [socket.c:3495:socket_init] 0-management: using system polling thread

[2014-11-24 13:51:30.820378] W [socket.c:514:__socket_rwv] 0-management: readv failed (No data available)

[2014-11-24 13:51:30.821243] I [glusterd-utils.c:1079:glusterd_volume_brickinfo_get] 0-management: Found brick

[2014-11-24 13:51:30.821268] I [socket.c:2236:socket_event_handler] 0-transport: disconnecting now

[2014-11-24 13:51:30.822036] I [glusterd-utils.c:1079:glusterd_volume_brickinfo_get] 0-management: Found brick

[2014-11-24 13:51:30.863454] I [glusterd-pmap.c:227:pmap_registry_bind] 0-pmap: adding brick /export/brick1 on port 49152

[2014-11-24 13:51:33.824274] W [socket.c:514:__socket_rwv] 0-management: readv failed (No data available)

[2014-11-24 13:51:34.817560] I [glusterd-utils.c:1079:glusterd_volume_brickinfo_get] 0-management: Found brick

[2014-11-24 13:51:39.824281] W [socket.c:514:__socket_rwv] 0-management: readv failed (No data available)

[2014-11-24 13:51:42.830260] W [socket.c:514:__socket_rwv] 0-management: readv failed (No data available)

[2014-11-24 13:51:48.832276] W [socket.c:514:__socket_rwv] 0-management: readv failed (No data available)

[ad nauseam...]



_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-users

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux