Hi Vince, Thank you for the quick response. For the time being to reduce the frequency the frequency of the alerts, please check whether flapping enabled. If not, please go ahead enable it. It will suppress the alerts if there is a frequent change in the service status. Currently the plugin checks for the number of un-synced entries and if it is grater than 0, change the state of the service which send the alert. Probably this part requires a change and we may have to introduce some thresholds using which decision can be taken whether to change the state of the service or not. Regarding why the upgrade causing the files to go out of sync, someone else needs to answer. Thanks, Nishanth ----- Original Message ----- From: "Vince Loschiavo" <vloschiavo@xxxxxxxxx> To: "Nishanth Thomas" <nthomas@xxxxxxxxxx> Cc: "Humble Devassy Chirammal" <humble.devassy@xxxxxxxxx>, "gluster-users@xxxxxxxxxxx" <Gluster-users@xxxxxxxxxxx>, "Sahina Bose" <sabose@xxxxxxxxxx> Sent: Wednesday, November 19, 2014 11:46:28 PM Subject: Re: v3.6.1 vs v3.5.2 self heal - help (Nagios related) Thank you! I think we may need some sort of dampening method and more specific input into Nagios. i.e. Details on which files are out-of-sync, versus just the number of files out-of-sync. I'm using these: http://download.gluster.org/pub/gluster/glusterfs-nagios/ On Wed, Nov 19, 2014 at 10:14 AM, Nishanth Thomas <nthomas@xxxxxxxxxx> wrote: > Hi Vince, > > Are you referring the monitoring scripts mentioned in the blog( > http://gopukrish.wordpress.com/2014/11/16/monitor-glusterfs-using-nagios-plugin/) > or the scripts part of the gluster( > http://gluster.org/pipermail/gluster-users.old/2014-June/017819.html)? > Please confirm? > > Thanks, > Nishanth > > ----- Original Message ----- > From: "Humble Devassy Chirammal" <humble.devassy@xxxxxxxxx> > To: "Vince Loschiavo" <vloschiavo@xxxxxxxxx> > Cc: "gluster-users@xxxxxxxxxxx" <Gluster-users@xxxxxxxxxxx>, "Sahina > Bose" <sabose@xxxxxxxxxx>, nthomas@xxxxxxxxxx > Sent: Wednesday, November 19, 2014 11:22:18 PM > Subject: Re: v3.6.1 vs v3.5.2 self heal - help (Nagios > related) > > Hi Vince, > It could be a behavioural change in heal process output capture with latest > GlusterFS. If that is the case, we may tune the interval which nagios > collect heal info output or some other settings to avoid continuous > alerts. I am Ccing gluster nagios devs. > > --Humble > > --Humble > > > On Wed, Nov 19, 2014 at 9:50 PM, Vince Loschiavo <vloschiavo@xxxxxxxxx> > wrote: > > > > > Hello Gluster Community, > > > > I have been using the Nagios monitoring scripts, mentioned in the below > > thread, on 3.5.2 with great success. The most useful of these is the self > > heal. > > > > However, I've just upgraded to 3.6.1 on the lab and the self heal daemon > > has become quite aggressive. I continually get alerts/warnings on 3.6.1 > > that virt disk images need self heal, then they clear. This is not the > > case on 3.5.2. This > > > > Configuration: > > 2 node, 2 brick replicated volume with 2x1GB LAG network between the > peers > > using this volume as a QEMU/KVM virt image store through the fuse mount > on > > Centos 6.5. > > > > Example: > > on 3.5.2: > > *gluster volume heal volumename info: *shows the bricks and number of > > entries to be healed: 0 > > > > On v3.5.2 - During normal gluster operations, I can run this command over > > and over again, 2-4 times per second, and it will always show 0 entries > to > > be healed. I've used this as an indicator that the bricks are > > synchronized. > > > > Last night, I upgraded to 3.6.1 in lab and I'm seeing different behavior. > > Running *gluster volume heal volumename info*, during normal operations, > > will show a file out-of-sync, seemingly between every block written to > disk > > then synced to the peer. I can run the command over and over again, 2-4 > > times per second, and it will almost always show something out of sync. > > The individual files change, meaning: > > > > Example: > > 1st Run: shows file1 out of sync > > 2nd run: shows file 2 and file 3 out of sync but file 1 is now in sync > > (not in the list) > > 3rd run: shows file 3 and file 4 out of sync but file 1 and 2 are in sync > > (not in the list). > > ... > > nth run: shows 0 files out of sync > > nth+1 run: shows file 3 and 12 out of sync. > > > > From looking at the virtual machines running off this gluster volume, > it's > > obvious that gluster is working well. However, this obviously plays > havoc > > with Nagios and alerts. Nagios will run the heal info and get different > > and non-useful results each time, and will send alerts. > > > > Is this behavior change (3.5.2 vs 3.6.1) expected? Is there a way to > tune > > the settings or change the monitoring method to get better results into > > Nagios. > > > > Thank you, > > > > -- > > -Vince Loschiavo > > > > > > On Wed, Nov 19, 2014 at 4:35 AM, Humble Devassy Chirammal < > > humble.devassy@xxxxxxxxx> wrote: > > > >> Hi Gopu, > >> > >> Awesome !! > >> > >> We can have a Gluster blog about this implementation. > >> > >> --Humble > >> > >> > >> > >> --Humble > >> > >> > >> On Wed, Nov 19, 2014 at 5:38 PM, Gopu Krishnan < > gopukrishnantec@xxxxxxxxx > >> > wrote: > >> > >>> Thanks for all your help... I was able to configure nagios using the > >>> glusterfs plugin. Following link shows how I configured it. Hope it > helps > >>> someone else.: > >>> > >>> > >>> > http://gopukrish.wordpress.com/2014/11/16/monitor-glusterfs-using-nagios-plugin/ > >>> > >>> On Sun, Nov 16, 2014 at 11:44 AM, Humble Devassy Chirammal < > >>> humble.devassy@xxxxxxxxx> wrote: > >>> > >>>> Hi, > >>>> > >>>> Please look at this thread > >>>> http://gluster.org/pipermail/gluster-users.old/2014-June/017819.html > >>>> > >>>> Btw, if you are around, we have a talk on same topic in upcoming > >>>> GlusterFS India meetup. > >>>> > >>>> Details can be fetched from: > >>>> http://www.meetup.com/glusterfs-India/ > >>>> > >>>> --Humble > >>>> > >>>> --Humble > >>>> > >>>> > >>>> On Sun, Nov 16, 2014 at 11:23 AM, Gopu Krishnan < > >>>> gopukrishnantec@xxxxxxxxx> wrote: > >>>> > >>>>> How can we monitor the glusters and alert us if something happened > >>>>> wrong. I found some nagios plugins and didn't work until this time. > I am > >>>>> still experimenting with those. Any suggestions would be much helpful > >>>>> > >>>>> _______________________________________________ > >>>>> Gluster-users mailing list > >>>>> Gluster-users@xxxxxxxxxxx > >>>>> http://supercolony.gluster.org/mailman/listinfo/gluster-users > >>>>> > >>>> > >>>> > >>> > >> > >> _______________________________________________ > >> Gluster-users mailing list > >> Gluster-users@xxxxxxxxxxx > >> http://supercolony.gluster.org/mailman/listinfo/gluster-users > >> > > > > > > > > > > > > _______________________________________________ > > Gluster-users mailing list > > Gluster-users@xxxxxxxxxxx > > http://supercolony.gluster.org/mailman/listinfo/gluster-users > > > -- -Vince Loschiavo _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://supercolony.gluster.org/mailman/listinfo/gluster-users
