Re: socket time out in fio benchmark

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11/11/2014 11:21 AM, shuau li wrote:

Hi everyone,


    I am trying to run multipal jobs using fio benchamark in replica volume


with 3 bricks, but some hours later, warning message “W [socket.c:195:__socket_rwv]


0-tcp.ida-server: readv failed (Connection timed out)” appear in bricks logs, I think this


waring may due to high work loads, glusterfs with high work loads can not respond


socket timely. So I add codes in rpc/rpc-transport/socket/src/socket.c to expand timeout

threshold of socket, now the SO_RCVTIMEO is 180s, KEEP_ALIVE is 300s, then run


work load again, but it does not work.


My test enviroment is as follow:
   
    Three nodes work as gluster cluster, each nodes with 16GB memory, 8 core


3.3GHz cpu
two 10000baseT/full and one 1000baseT/full network cards, each nodes

use 16 * 2T raid5 disks working as brick. The glusterfs version is 3.3.1.

Just wanted to know if there is a possibility of using newer versions. No new releases are being made from 3.3.x. Could you try the case on newer versions and let us know your findings? If for some reasons you can't upgrade then we can probably start debugging this in 3.3.x. But I highly recommend you use a version that is active i.e. at least 3.4.x

Pranith

    I create a 1*3 replica volume use this three nodes, every node use fuse to mount


volume through a 10000baseT/full network card. At the sametime, every node use cifs to


mount fuse_mount_point through another 10000baseT/full card.


    Each node run two fio scripts, read and write jobs. Both scripts do operation in


cifs_mount_point. scripts is as follows:

write_jobs:
while true

do

mkdir -p ${DIR}_write_${i}

/usr/local/bin/fio --ioengine=libaio --iodepth=256 --numjobs=100 --rw=write --bs=1k --size=1000m --directory=${DIR}_write_${i} --name=job01_1k_write >> ${DIR}_write_${i}/job01_1k_write.log
i=`expr $i + 1`
done


read jobs:
mkdir -p ${DIR}_read_${i}

/usr/local/bin/fio --ioengine=libaio --iodepth=256 --numjobs=100 --rw=read --bs=1k --size=1000m --directory=${DIR}_read_${i} --name=job01_1k_read >> ${DIR}_read_${i}/job01_1k_read.log

i=`expr $i + 1`

done
 
    I change iodepth from 256 to 16, numjobs from 100 to 25, but it still does not

work. Is there anybody pay attention to this problem?






_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-users

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux