W dniu 20.10.2014 22:25, Ted Miller pisze:
On 10/16/2014 2:48 PM, Łukasz Zygmański wrote:Since no one has answered this in a few days, I will try to do so, or at least start the process.Hello,I am new to this list and new to GlusterFS, so I would be grateful if you could help me.I am trying to do this setup: client1(10.75.2.45) | | MTU 1500 V (10.75.2.41) gluster1 gluster2 (10.75.2.43) -------> (10.75.2.44) <------- MTU 9000In words, I have two glusterfs servers (in replication): gluster1 and gluster2 and a glusterfs client client1.The gluster1 has two network interfaces: 10.75.2.41 and 10.75.2.43.I would like gluster1 to communicate with gluster2 using jumbo frames and connection would be between interfaces 10.75.2.43 and 10.75.2.44. Since the client1 can only use default packet size (MTU 1500) I would like it to connect with gluster1 using only other network interface: 10.75.2.41.Is it possible? At the moment on gluster1 I have: eno16780032: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.75.2.43 netmask 255.255.255.0 broadcast 10.75.2.255 eno33559296: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.75.2.41 netmask 255.255.255.0 broadcast 10.75.2.255 and when I mount from client1 using: mount -t glusterfs 10.75.2.41:/vol1 /mnt/glusterfs it still uses connection to 10.75.2.43: # netstat -natup | egrep '(2.41|2.43)'tcp 0 0 10.75.2.45:1020 10.75.2.43:49152 ESTABLISHED 10856/glusterfs tcp 0 0 10.75.2.45:1022 10.75.2.41:24007 ESTABLISHED 10856/glusterfsIs there a way to restrict communication from client1 to gluster1 using only one IP address: 10.75.2.41?Any help would be much appreciated. Best regards Lukasz PS GlusterFS version on client: glusterfs-3.5.2-1.el7.x86_64 glusterfs-fuse-3.5.2-1.el7.x86_64 GlusterFS version on server: glusterfs-server-3.5.2-1.el7.x86_64 glusterfs-3.5.2-1.el7.x86_64You do not mention how the client connects.1. If it is using gluster-fuse, what you are trying to do is futile, because the connections are not as you think. The data does not flow from client1 -> gluster1 -> gluster2. The way it really works is that client1 connects directly to both gluster1 and gluster2, and sends the data to both of them at the same time. The only time any volume of data transfers directly from gluster1 to gluster2 is during a heal operation. Unfortunately, gluster does not understand the concept of a separate "storage network" that the servers use to talk to each other. It only has one address, and that address is the one that the clients connect to.2. If the client uses NFS, then you have something more like what you drew. The data passes client1 -> gluster1 via NFS, and then gluster1 -> gluster2. I am not using NFS, so I can't help you with if it is possible to have NFS on one network connection and gluster on a different connection, or what is required to accomplish this (if it can be done at all).Ted Miller
Thank you very much Ted, at least I now understand how the connection using FUSE client works and it was the connection I had in mind.
-- Łukasz Zygmański Uczelniane Centrum Information & Communication Informatyczne Technology Centre Uniwersytet Mikolaja Kopernika Nicolaus Copernicus University Coll. Maximum, pl. Rapackiego 1, 87-100 Torun, Poland tel.: +48 56 611 27 36 fax: +48 56-622-18-50 email: Lukasz.Zygmanski@xxxxxx
Attachment:
smime.p7s
Description: Kryptograficzna sygnatura S/MIME
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://supercolony.gluster.org/mailman/listinfo/gluster-users