Hello Niels, Thanks for pointing me to the right logs file. I see the following when I enable the log-level to DEBUG option: [2014-10-05 07:57:49.254925] I [glusterfsd.c:1959:main] 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.5.1 (/usr/sbin/glusterfs --log-level=DEBUG --volfile-server=srv1 --volfile-id=/gv0 /var/www/html/image/) [2014-10-05 07:57:49.255810] D [glusterfsd.c:410:set_fuse_mount_options] 0-glusterfsd: fopen-keep-cache mode 2 [2014-10-05 07:57:49.255844] D [glusterfsd.c:466:set_fuse_mount_options] 0-: fuse direct io type 2 [2014-10-05 07:57:49.256118] D [options.c:1112:xlator_option_init_double] 0-fuse: option negative-timeout using set value 0.000000 [2014-10-05 07:57:49.269774] D [rpc-clnt.c:975:rpc_clnt_connection_init] 0-glusterfs: defaulting frame-timeout to 30mins [2014-10-05 07:57:49.269872] D [rpc-transport.c:262:rpc_transport_load] 0-rpc-transport: attempt to load file /usr/lib64/glusterfs/3.5.1/rpc-transport/socket.so [2014-10-05 07:57:49.274941] I [socket.c:3561:socket_init] 0-glusterfs: SSL support is NOT enabled [2014-10-05 07:57:49.274962] I [socket.c:3576:socket_init] 0-glusterfs: using system polling thread [2014-10-05 07:57:49.274987] D [rpc-clnt.c:1427:rpcclnt_cbk_program_register] 0-glusterfs: New program registered: GlusterFS Callback, Num: 52743234, Ver: 1 [2014-10-05 07:57:49.281676] D [common-utils.c:248:gf_resolve_ip6] 0-resolver: returning ip-127.0.0.1 (port-24007) for hostname: srv1 and port: 24007 [2014-10-05 07:57:49.285116] D [io-stats.c:2700:init] 0-gv0: dangling volume. check volfile [2014-10-05 07:57:49.285160] D [options.c:1109:xlator_option_init_bool] 0-gv0: option count-fop-hits using set value off [2014-10-05 07:57:49.285173] D [options.c:1109:xlator_option_init_bool] 0-gv0: option latency-measurement using set value off [2014-10-05 07:57:49.285204] D [options.c:1106:xlator_option_init_size] 0-gv0-quick-read: option cache-size using set value 1GB [2014-10-05 07:57:49.285311] D [quick-read.c:822:check_cache_size_ok] 0-gv0-quick-read: Max cache size is 1040621568 [2014-10-05 07:57:49.285326] E [quick-read.c:827:check_cache_size_ok] 0-gv0-quick-read: Cache size 1073741824 is greater than the max size of 1040621568 [2014-10-05 07:57:49.285336] E [xlator.c:403:xlator_init] 0-gv0-quick-read: Initialization of volume 'gv0-quick-read' failed, review your volfile again [2014-10-05 07:57:49.285345] E [graph.c:307:glusterfs_graph_init] 0-gv0-quick-read: initializing translator failed [2014-10-05 07:57:49.285354] E [graph.c:502:glusterfs_graph_activate] 0-graph: init failed [2014-10-05 07:57:49.285889] W [glusterfsd.c:1095:cleanup_and_exit] (-->/usr/lib64/libgfrpc.so.0(rpc_clnt_handle_reply+0xa5) [0x7fe1cb7766d5] (-->/usr/sbin/glusterfs(mgmt_getspec_cbk+0x320) [0x40bd50] (-->/usr/sbin/glusterfs(glusterfs_process_volfp+0x106) [0x405146]))) 0-: received signum (0), shutting down [2014-10-05 07:57:49.285904] D [glusterfsd-mgmt.c:2025:glusterfs_mgmt_pmap_signout] 0-fsd-mgmt: portmapper signout arguments not given [2014-10-05 07:57:49.285941] I [fuse-bridge.c:5475:fini] 0-fuse: Unmounting '/var/www/html/image/‘. No modification was done to the .vol file: -bash-4.1# cat /etc/glusterfs/glusterd.vol volume management type mgmt/glusterd option working-directory /var/lib/glusterd option transport-type socket,rdma option transport.socket.keepalive-time 10 option transport.socket.keepalive-interval 2 option transport.socket.read-fail-log off option rpc-allow-insecure on # option base-port 49152 end-volume -bash-4.1# Any suggestions? Thanks, Guru. On 5 Oct 2014, at 6:53 pm, Niels de Vos <ndevos@xxxxxxxxxx> wrote:
|
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://supercolony.gluster.org/mailman/listinfo/gluster-users
