Hi,
I ran few more tests. I moved a file which is an VM image onto GlusterFS
mount and along the load I got this on console of running VM:
lost page write due to I/O error on vda1
Buffer I/O error on device vda1, logical block 1049638
lost page write due to I/O error on vda1
Buffer I/O error on device vda1, logical block 1049646
lost page write due to I/O error on vda1
Buffer I/O error on device vda1, logical block 1049647
lost page write due to I/O error on vda1
Buffer I/O error on device vda1, logical block 1049649
lost page write due to I/O error on vda1
end_request: I/O error, dev vda, sector 8399688
end_request: I/O error, dev vda, sector 8399728
end_request: I/O error, dev vda, sector 8399736
end_request: I/O error, dev vda, sector 8399776
end_request: I/O error, dev vda, sector 8399792
__ratelimit: 5 callbacks suppressed
EXT4-fs error (device vda1): ext4_find_entry: reading directory #398064
offset 0
EXT4-fs error (device vda1): ext4_find_entry: reading directory #398064
offset 0
EXT4-fs error (device vda1): ext4_find_entry: reading directory #132029
offset 0
Do you think it is related to options which are set to the volume?
storage.owner-gid: 498
storage.owner-uid: 498
network.ping-timeout: 2
performance.io-thread-count: 3
cluster.server-quorum-type: server
network.remote-dio: enable
cluster.eager-lock: enable
performance.stat-prefetch: off
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
Thanks Milos
Dne 14-09-03 v 04:01 PM Milos Kozak napsal(a):
I have just tried to copy an VM image (raw) and causes the same problem.
I have GlusterFS 3.5.2
On 9/3/2014 9:14 AM, Roman wrote:
Hi,
I had some issues with files generated from /dev/zero also. try real
files or /dev/urandom :)
I don't know, if there is a real issue/bug with files generated from
/dev/zero ? Devs should check them out /me thinks.
2014-09-03 16:11 GMT+03:00 Milos Kozak <milos.kozak@xxxxxxxxx
<mailto:milos.kozak@xxxxxxxxx>>:
Hi,
I am facing a quite strange problem when I do have two servers with
the same configuration and the same hardware. Servers are connected
by bonded 1GE. I have one volume:
[root@nodef02i 103]# gluster volume info
Volume Name: ph-fs-0
Type: Replicate
Volume ID: f8f569ea-e30c-43d0-bb94-__b2f1164a7c9a
Status: Started
Number of Bricks: 1 x 2 = 2
Transport-type: tcp
Bricks:
Brick1: 10.11.100.1:/gfs/s3-sata-10k/__fs
Brick2: 10.11.100.2:/gfs/s3-sata-10k/__fs
Options Reconfigured:
storage.owner-gid: 498
storage.owner-uid: 498
network.ping-timeout: 2
performance.io-thread-count: 3
cluster.server-quorum-type: server
network.remote-dio: enable
cluster.eager-lock: enable
performance.stat-prefetch: off
performance.io-cache: off
performance.read-ahead: off
performance.quick-read: off
Intended to host virtual servers (KVM), the configuration is
according to the gluster blog.
Currently I have got only one virtual server deployed on top of this
volume in order to see effects of my stress tests. During the tests
I write to the volume mounted through FUSE by dd (currently on one
writing at a moment):
dd if=/dev/zero of=test2.img bs=1M count=20000 conv=fdatasync
Test 1) I run dd on nodef02i. Load on nodef02i is max 1erl but on
the nodef01i around 14erl (I do have 12threads CPU). After the write
is done the load on nodef02i goes down, but the load goes up to
28erl on nodef01i. 20minutes it stays the same. In the mean time I
can see:
[root@nodef01i 103]# gluster volume heal ph-fs-0 info
Volume ph-fs-0 is not started (Or) All the bricks are not running.
Volume heal failed
[root@nodef02i 103]# gluster volume heal ph-fs-0 info
Brick nodef01i.czprg:/gfs/s3-sata-__10k/fs/
/__3706a2cb0bb27ba5787b3c12388f4e__bb - Possibly undergoing heal
/test.img - Possibly undergoing heal
Number of entries: 2
Brick nodef02i.czprg:/gfs/s3-sata-__10k/fs/
/__3706a2cb0bb27ba5787b3c12388f4e__bb - Possibly undergoing heal
/test.img - Possibly undergoing heal
Number of entries: 2
[root@nodef01i 103]# gluster volume status
Status of volume: ph-fs-0
Gluster process Port
Online Pid
------------------------------__------------------------------__------------------
Brick 10.11.100.1:/gfs/s3-sata-10k/__fs 49152 Y
56631
Brick 10.11.100.2:/gfs/s3-sata-10k/__fs 49152 Y
3372
NFS Server on localhost 2049 Y
56645
Self-heal Daemon on localhost N/A Y
56649
NFS Server on 10.11.100.2 2049 Y
3386
Self-heal Daemon on 10.11.100.2 N/A
Y 3387
Task Status of Volume ph-fs-0
------------------------------__------------------------------__------------------
There are no active volume tasks
This very high load takes another 20-30minutes. During the first
test I restarted glusterd service after 10minutes because everything
seemed to me that the service does not work, but I could see very
high load on the nodef01i.
Consequently, the virtual server yields errors about problems with
EXT4 filesystem - MySQL stops.
When the load culminated I tried to run the same test but from
opposite direction. I wrote (dd) from nodef01i - test2. Happened
more or less the same. I gained extremely high load on nodef01i and
minimal load on nodef02i. Outputs from heal were more or less the
same..
I would like to tweak this but I don´t know what I should focus on.
Thank you for help.
Milos
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx <mailto:Gluster-users@xxxxxxxxxxx>
http://supercolony.gluster.org/mailman/listinfo/gluster-users
--
Best regards,
Roman.
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-users
