Slow Read/Write Speeds | Fuse Error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Looking for some guidance,

 

I have a cluster set up with three servers for testing.  I have two Gluster volumes running, one is distributed replicate (gv01) the other is just distributed (gv02).  For gv01, I have two disks on each server setup as bricks.  The other volume, gv02 has a single disk on each server as a brick.  I am running oVirt and have tied these volumes into it.  I have three VM’s created and running through oVirt, two using the  gv02 and the other using gv01.  If I run the VM on the same server the first brick of the volume is set up, the speeds are +100mb/s.  If I then move the VM to another server, the speeds drop down to under 10mb/s.  The command I am using to test is as follows:

 

dd if=/dev/zero of=test bs=1M count=500 conv=fdatasync

 

I have set up the volume to report out “debug” mode, and this keeps popping up, does it have something to do with the slow speeds:

 

[2014-09-03 23:52:02.301568] D [fuse-bridge.c:48:fuse_invalidate] 0-fuse: Invalidate inode id 140382182774028.

[2014-09-03 23:52:17.776083] D [client-handshake.c:185:client_start_ping] 0-gv02-client-0: returning as transport is already disconnected OR there are no frames (0 || 0)

 

Gluster volume options are as follows:

 

[root@u6 ~]# gluster volume info

 

Volume Name: gv01

Type: Distributed-Replicate

Volume ID: 0fa1a3e9-12b1-4a21-9310-4e27bed55b54

Status: Started

Number of Bricks: 3 x 2 = 6

Transport-type: tcp

Bricks:

Brick1: u5:/export/sdb1

Brick2: u6:/export/sdb1

Brick3: u9:/export/sdb1

Brick4: u5:/export/sdc1

Brick5: u6:/export/sdc1

Brick6: u9:/export/sdc1

Options Reconfigured:

performance.write-behind-window-size: 512MB

performance.read-ahead: off

diagnostics.client-log-level: DEBUG

diagnostics.latency-measurement: on

performance.cache-size: 1GB

performance.io-thread-count: 64

network.remote-dio: enable

user.cifs: disable

auth.allow: 162.x.x.*

storage.owner-gid: 36

storage.owner-uid: 36

 

Volume Name: gv02

Type: Distribute

Volume ID: 33dea48e-4754-42a9-aeee-96a99c407924

Status: Started

Number of Bricks: 3

Transport-type: tcp

Bricks:

Brick1: u5:/export/sdd1

Brick2: u6:/export/sdd1

Brick3: u9:/export/sdd1

Options Reconfigured:

cluster.choose-local: true

diagnostics.client-log-level: DEBUG

storage.owner-gid: 36

storage.owner-uid: 36

auth.allow: 162.x.x.*

user.cifs: enable

nfs.disable: off

 

Why are the speeds so slow?

 

Chris

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux