libgfapi failover problem on replica bricks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello!

Facing the same problem as mentioned here:

http://supercolony.gluster.org/pipermail/gluster-users/2014-April/039959.html

my set up is up and running, so i'm ready to help you back with feedback.

setup:
proxmox server as client
2 gluster physical  servers

server side and client side both running atm 3.4.4 glusterfs from gluster repo.

the problem is:

1. craeted replica bricks.
2. mounted in proxmox (tried both promox ways: via GUI and fstab (with backup volume line), btw while mounting via fstab I'm unable to launch a VM without cache, meanwhile direct-io-mode is enabled in fstab line)
3. installed VM
4. bring one volume down - ok
5. bringing up, waiting for sync is done.
6. bring other volume down - getting IO errors on VM guest and not able to restore the VM after I reset the VM via host. It says (no bootable media). After I shut it down (forced) and bring back up, it boots.

Need help. Tried 3.4.3, 3.4.4.
Still missing pkg-s for 3.4.5 for debian and 3.5.2 (3.5.1 always gives a healing error for some reason)

--
Best regards,
Roman.
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux