This is a workaround: make install -- DESTDIR=/ This way the installation works. BTW: Some tests with dd show that the write performance for blocks of GlusterFS 3.5.0 is approx 4 times faster than GlusterFS 3.4.4. This is my configuration: $ sudo gluster volume info Volume Name: volume1 Type: Replicate Volume ID: a0946dd4-b4d1-40f7-b08d-bf120c2fa2fb Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: raspberrypi01:/mnt/mmcblk0p3/brick1 Brick2: raspberrypi02:/mnt/mmcblk0p3/brick1 I tested several times with this command: $ sudo dd if=/dev/zero of=/glusterfs/testfile bs=300M count=1 oflag=direct The write performance of GlusterFS 3.4.4 is approx. 1 MB. The write performance of GlusterFS 3.5.0 is approx. 4 MB. The network connection between the Raspberry Pis is 100 Mbps Ethernet. Best Regards Christian Baun --- Prof. Dr. Christian Baun Fachhochschule Frankfurt am Main Büro: +49-069-1533-3196 Privat: +49-6235-9591351 Mobil: +49-170-2817531 Die 2. Auflage von "Computernetze kompakt" ist erschienen. ISBN 978-3-642-41652-1. Springer Vieweg. Februar 2014 2014-06-22 21:29 GMT+02:00 Harshavardhana <harsha@xxxxxxxxxxxxxxxxxx>: > Looks like some sort of a automake issue, argument to ./py-compile > --destdir is missing. > > On Sun, Jun 22, 2014 at 11:51 AM, Prof. Dr. Christian Baun > <christianbaun@xxxxxxxxx> wrote: >> Hi, >> >> I want to build up a Cluster of RaspberryPis and realize a distributed >> and replicated storage with GlusterFS. >> >> Raspbian contains GlusterFS 3.2.7 which is quite old. For this reason >> I want to compile GlusterFS 3.5 on Raspbian but at the end of "make >> install" I get an error message "py-compile: Missing argument to >> --destdir.". >> >> I carried out these steps: >> >> $ sudo apt-get update >> $ sudo apt-get install -y make gcc flex bison libssl-dev liblvm2-dev >> libglib2.0-dev libxml2-dev python2.7 python2.7-dev autoconf libtool >> $ wget http://download.gluster.org/pub/gluster/glusterfs/3.5/3.5.0/glusterfs-3.5.0.tar.gz >> $ tar -xvzf glusterfs-3.5.0.tar.gz >> $ cd glusterfs-3.5.0/ >> $ ./autogen.sh >> >> ... GlusterFS autogen ... >> >> Generate gf-error-codes.h ... >> `gf-error-codes.h' -> `libglusterfs/src/gf-error-codes.h' >> Running aclocal... >> Running autoheader... >> Running libtoolize... >> Running autoconf... >> Running automake... >> >> Please proceed with configuring, compiling, and installing. >> >> $ ./configure >> GlusterFS configure summary >> =========================== >> FUSE client : yes >> Infiniband verbs : no >> epoll IO multiplex : yes >> argp-standalone : no >> fusermount : yes >> readline : no >> georeplication : yes >> Linux-AIO : no >> Enable Debug : no >> systemtap : no >> Block Device xlator : yes >> glupy : yes >> Use syslog : yes >> XML output : yes >> QEMU Block formats : yes >> Encryption xlator : yes >> >> $ make >> >> $ sudo make install >> Making install in argp-standalone >> Making install in . >> Making install in libglusterfs >> Making install in src >> /bin/mkdir -p '/usr/local/lib' >> /bin/bash ../../libtool --quiet --mode=install /usr/bin/install -c >> libglusterfs.la '/usr/local/lib' >> Making install in rpc >> Making install in rpc-lib >> Making install in src >> /bin/mkdir -p '/usr/local/lib' >> /bin/bash ../../../libtool --quiet --mode=install /usr/bin/install -c >> libgfrpc.la '/usr/local/lib' >> libtool: install: warning: relinking `libgfrpc.la' >> Making install in rpc-transport >> Making install in socket >> Making install in src >> /bin/mkdir -p '/usr/local/lib/glusterfs/3.5.0/rpc-transport' >> /bin/bash ../../../../libtool --quiet --mode=install /usr/bin/install >> -c socket.la '/usr/local/lib/glusterfs/3.5.0/rpc-transport' >> libtool: install: warning: relinking `socket.la' >> Making install in xdr >> Making install in src >> /bin/mkdir -p '/usr/local/lib' >> /bin/bash ../../../libtool --quiet --mode=install /usr/bin/install -c >> libgfxdr.la '/usr/local/lib' >> libtool: install: warning: relinking `libgfxdr.la' >> Making install in api >> Making install in src >> /bin/mkdir -p '/usr/local/lib' >> /bin/bash ../../libtool --quiet --mode=install /usr/bin/install -c >> libgfapi.la '/usr/local/lib' >> libtool: install: warning: relinking `libgfapi.la' >> /bin/mkdir -p '/usr/local/include/glusterfs/api' >> /usr/bin/install -c -m 644 glfs.h glfs-handles.h >> '/usr/local/include/glusterfs/api' >> /bin/mkdir -p '/usr/local/lib/glusterfs/3.5.0/xlator/mount' >> /bin/bash ../../libtool --quiet --mode=install /usr/bin/install -c >> api.la '/usr/local/lib/glusterfs/3.5.0/xlator/mount' >> libtool: install: warning: relinking `api.la' >> Making install in examples >> /bin/mkdir -p '/usr/local/lib/python2.7/dist-packages/gluster' >> /usr/bin/install -c -m 644 __init__.py gfapi.py >> '/usr/local/lib/python2.7/dist-packages/gluster' >> ../../py-compile: Missing argument to --destdir. >> make[3]: *** [install-pygfapiPYTHON] Error 1 >> make[2]: *** [install-am] Error 2 >> make[1]: *** [install-recursive] Error 1 >> make: *** [install-recursive] Error 1 >> >> Other people did also run into this problem. One example is here: >> http://bighippo999.blogspot.de/2014/05/raspberry-pi-glusterfs-part-2.html >> >> Does anybody here know how to fix this problem? >> >> Thanks for any help. >> >> Best Regards >> Christian Baun >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users@xxxxxxxxxxx >> http://supercolony.gluster.org/mailman/listinfo/gluster-users > > > > -- > Religious confuse piety with mere ritual, the virtuous confuse > regulation with outcomes _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://supercolony.gluster.org/mailman/listinfo/gluster-users
