Hey Joe! Yeah we are all XFS all the time round here - none of that nasty ext4 combo that we know causes raised levels of mercury :-) The brick errors, we have not seen any we have been busy grepping and alerting on anything suspect in our logs. Mind you there are hundreds of brick logs to search through I'm not going to say we may have missed one, but after asking the boys in chat just now they are pretty convinced that was not the smoking gun. I'm sure they will chip in on this thread if there is anything. j. -- dr. james cuff, assistant dean for research computing, harvard university | division of science | thirty eight oxford street, cambridge. ma. 02138 | +1 617 384 7647 | http://rc.fas.harvard.edu On Wed, Apr 9, 2014 at 10:36 AM, Joe Julian <joe@xxxxxxxxxxxxxxxx> wrote: > What's the backend filesystem? > Were there any brick errors, probably around 2014-03-31 22:44:04 (half an > hour before the frame timeout)? > > > On April 9, 2014 7:10:58 AM PDT, James Cuff <james_cuff@xxxxxxxxxxx> wrote: >> >> Hi team, >> >> I hate "me too" emails sometimes not at all constructive, but I feel I >> really ought chip in from real world systems we use in anger and at >> massive scale here. >> >> So we also use NFS to "mask" this and other performance issues. The >> cluster.readdir-optimize gave us similar results unfortunately. >> >> We reported our other challenge back last summer but we stalled on this: >> >> http://www.gluster.org/pipermail/gluster-users/2013-June/036252.html >> >> We also unfortunately now see a new NFS phenotype that I've pasted >> below which is again is causing real heartburn. >> >> Small files, always difficult for any FS, might be worth doing some >> regression testing with small file directory scenarios in test - it's >> an easy reproducer on even moderately sized gluster clusters. Hope >> some good progress can be >> made, and I understand it's a tough one to >> track down performance hangs and issues. I just wanted to say that we >> really do see them, and have tried many things to avoid them. >> >> Here's the note from my team: >> >> We were hitting 30 minute timeouts on getxattr/system.posix_acl_access >> calls on directories in a NFS v3 mount (w/ acl option) of a 10-node >> 40-brick gluster 3.4.0 volume. Strace shows where the client hangs: >> >> $ strace -tt -T getfacl d6h_take1 >> ... >> 18:43:57.929225 lstat("d6h_take1", {st_mode=S_IFDIR|0755, >> st_size=7024, ...}) = 0 <0.257107> >> 18:43:58.186461 getxattr("d6h_take1", "system.posix_acl_access", >> 0x7fffdf2b9f50, 132) = -1 ENODATA (No data available) <1806.296893> >> 19:14:04.483556 stat("d6h_take1", {st_mode=S_IFDIR|0755, st_size=7024, >> ...}) = 0 <0.642362> >> 19:14:05.126025 getxattr("d6h_take1", "system.posix_acl_default", >> 0x7fffdf2b9f50, 132) = -1 ENODATA (No data >> available) <0.000024> >> 19:14:05.126114 stat("d6h_take1", {st_mode=S_IFDIR|0755, st_size=7024, >> ...}) = 0 <0.000010> >> ... >> >> Load on the servers was moderate. While the above was hanging, >> getfacl worked nearly instantaneously on that directory on all bricks. >> When it finally hit the 30 minute timeout, gluster logged it in >> nfs.log: >> >> [2014-03-31 23:14:04.481154] E [rpc-clnt.c:207:call_bail] >> 0-holyscratch-client-36: bailing out frame type(GlusterFS 3.3) >> op(GETXATTR(18)) xid = 0x8168809x sent = 2014-03-31 22:43:58.442411. >> timeout = 1800 >> [2014-03-31 23:14:04.481233] W >> [client-rpc-fops.c:1112:client3_3_getxattr_cbk] >> 0-holyscratch-client-36: remote operation failed: Transport endpoint >> is not connected. Path: <gfid:b116fb01-b13d-448a-90d0-a8693a98698b> >> (b116fb01-b13d-448a-90d0-a8693a98698b). Key: (null) >> >> Other than that, we didn't see anything directly related in the nfs or >> brick logs or anything out of sorts with the gluster services. A >> couple other errors raise eyebrows, but these are different >> directories (neighbors of the example above) and at different times: >> >> holyscratch07: /var/log/glusterfs/nfs.log:[2014-03-31 19:30:47.794454] >> I [dht-layout.c:630:dht_layout_normalize] 0-holyscratch-dht: found >> anomalies in /ramanathan_lab/dhuh/d9_take2_BGI/Diffreg. holes=1 >> overlaps=0 >> holyscratch07: /var/log/glusterfs/nfs.log:[2014-03-31 19:31:47.794447] >> I [dht-layout.c:630:dht_layout_normalize] 0-holyscratch-dht: found >> anomalies in /ramanathan_lab/dhuh/d9_take2_BGI/Diffreg. holes=1 >> overlaps=0 >> holyscratch07: /var/log/glusterfs/nfs.log:[2014-03-31 19:33:47.802135] >> I [dht-layout.c:630:dht_layout_normalize] 0-holyscratch-dht: found >> anomalies in /ramanathan_lab/dhuh/d9_take2_BGI/Diffreg. holes=1 >> overlaps=0 >> holyscratch07: /var/log/glusterfs/nfs.log:[2014-03-31 19:34:47.802182] >> I >> [dht-layout.c:630:dht_layout_normalize] 0-holyscratch-dht: found >> anomalies in /ramanathan_lab/dhuh/d9_take2_BGI/Diffreg. holes=1 >> overlaps=0 >> holyscratch07: /var/log/glusterfs/nfs.log:[2014-03-31 19:36:47.764329] >> I [dht-layout.c:630:dht_layout_normalize] 0-holyscratch-dht: found >> anomalies in /ramanathan_lab/dhuh/d9_take2_BGI/Diffreg. holes=1 >> overlaps=0 >> holyscratch07: /var/log/glusterfs/nfs.log:[2014-03-31 19:37:47.773164] >> I [dht-layout.c:630:dht_layout_normalize] 0-holyscratch-dht: found >> anomalies in /ramanathan_lab/dhuh/d9_take2_BGI/Diffreg. holes=1 >> overlaps=0 >> holyscratch07: /var/log/glusterfs/nfs.log:[2014-03-31 19:39:47.774285] >> I [dht-layout.c:630:dht_layout_normalize] 0-holyscratch-dht: found >> anomalies in /ramanathan_lab/dhuh/d9_take2_BGI/Diffreg. holes=1 >> overlaps=0 >> holyscratch07: /var/log/glusterfs/nfs.log:[2014-03-31 19:40:47.780338] >> I [dht-layout.c:630:dht_layout_normalize] 0-holyscratch-dht: >> found >> anomalies in /ramanathan_lab/dhuh/d9_take2_BGI/Diffreg. holes=1 >> overlaps=0 >> holyscratch07: /var/log/glusterfs/nfs.log:[2014-03-31 19:42:47.730345] >> I [dht-layout.c:630:dht_layout_normalize] 0-holyscratch-dht: found >> anomalies in /ramanathan_lab/dhuh/d9_take2_BGI/Diffreg. holes=1 >> overlaps=0 >> >> holyscratch08: >> /var/log/glusterfs/bricks/holyscratch08_03-brick.log:[2014-03-31 >> 00:57:51.973565] E [posix-helpers.c:696:posix_handle_pair] >> 0-holyscratch-posix: >> /holyscratch08_03/brick/ramanathan_lab/dhuh/d9_take2_BGI/cuffdiffRN.txt: >> key:system.posix_acl_access error:Invalid argument >> holyscratch08: >> /var/log/glusterfs/bricks/holyscratch08_03-brick.log:[2014-03-31 >> 01:18:12.345818] E [posix-helpers.c:696:posix_handle_pair] >> 0-holyscratch-posix: >> /holyscratch08_03/brick/ramanathan_lab/dhuh/d9_take2_BGI/cuffdiffRN.txt: >> key:system.posix_acl_access error:Invalid argument >> holyscratch05: >> /var/log/glusterfs/bricks/holyscratch05_04-brick.log:[2014-03-31 >> 21:16:37.057674] E [posix-helpers.c:696:posix_handle_pair] >> 0-holyscratch-posix: >> >> /holyscratch05_04/brick/ramanathan_lab/dhuh/d9_take2_BGI/Diffreg/cuffdiffRN.txt: >> key:system.posix_acl_access error:Invalid argument >> >> -- >> dr. james cuff, assistant dean for research computing, harvard >> university | division of science | thirty eight oxford street, >> cambridge. ma. 02138 | +1 617 384 7647 | http://rc.fas.harvard.edu >> >> >> On Wed, Apr 9, 2014 at 9:52 AM, <james.bellinger@xxxxxxxxxxxxxxxx> wrote: >>> >>> I am seeing something perhaps similar. 3.4.2-1, 2 servers, each with 1 >>> brick, replicated. A du of a local (ZFS) directory tree of 297834 files >>> and 525GB takes about 17 minutes. A du of the gluster copy >>> is still not >>> finished after 22 hours. Network activity has been about 5-6KB/sec >>> until >>> (I gather) du hit a directory with 22450 files, when activity jumped to >>> 300KB/sec (200 packets/sec) for about 15-20 minutes. If I assume that >>> the >>> spike came from scanning the two largest directories, that looks like >>> about 8K of traffic per file, and about 5 packets. >>> >>> A 3.3.2 gluster installation that we are trying to retire is not >>> afflicted >>> this way. >>> >>> James Bellinger >>> >>>> >>>> Am I the only person using Gluster suffering from very slow directory >>>> access? It's so seriously bad that it almost makes Gluster unusable. >>>> >>>> Using NFS instead of the Fuse client masks the problem as long as the >>>> directories are cached but it's still hellishly slow when you first >>>> access them. >>>> >>>> Has there >>>> been any progress at all fixing this bug? >>>> >>>> https://bugzilla.redhat.com/show_bug.cgi?id=1067256 >>>> >>>> Cheers, >>>> >>>> ________________________________ >>>> >>>> Gluster-users mailing list >>>> Gluster-users@xxxxxxxxxxx >>>> http://supercolony.gluster.org/mailman/listinfo/gluster-users >>> >>> >>> >>> >>> ________________________________ >>> >>> Gluster-users mailing list >>> Gluster-users@xxxxxxxxxxx >>> http://supercolony.gluster.org/mailman/listinfo/gluster-users >> >> ________________________________ >> >> Gluster-users mailing list >> Gluster-users@xxxxxxxxxxx >> http://supercolony.gluster.org/mailman/listinfo/gluster-users > > > -- > Sent from my Android device with K-9 Mail. Please excuse my brevity. _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://supercolony.gluster.org/mailman/listinfo/gluster-users
