Also, going back to an earlier Email,
should I be concerned that in the output
from "gluster volume status" the
brick "gluster-data:/data" has an "N"
in the "Online" column? Does this suggest
an additional debugging route?
gluster volume status
Status of volume: gdata
Gluster process Port Online Pid
------------------------------------------------------------------------------
Brick gluster-0-0:/mseas-data-0-0 24009 Y
27006
Brick gluster-0-1:/mseas-data-0-1 24009 Y 7063
Brick gluster-data:/data 24010 N
15772
NFS Server on localhost 38467 Y
14936
NFS Server on gluster-data 38467 Y
15778
NFS Server on gluster-0-1 38467 Y
21083
First, another update on my test of writing
a directory with 480 6Mb files. Not only do
over 3/4 of the files appear, but the are
written on all 3 bricks. Again, it is random
which files are not written but what I seem
to see is that files are written to each brick
even after the failures. Does this suggest
anything else I should be looking at?
As to Brian's suggestion, how exactly do I perform
a "quick inode allocation test"?
Thanks
Pat
On 01/17/2014 07:48 PM, Pat Haley wrote:
Hi Franco,
I checked using df -i on all 3 bricks. No brick is over
1% inode usage.
It might be worth a quick inode allocation test on the fs for each
brick, regardless. There are other non-obvious scenarios that can cause
inode allocation to fail, at least on xfs (i.e., contiguous block
allocation). Ideally, you'll have the ability to do this in a
subdirectory outside the actual glusterfs brick.
Brian
Thanks.
Pat
Have you run out of inodes on the underlying filesystems?
On 18 Jan 2014 05:41, Pat Haley <phaley@xxxxxxx> wrote:
Latest updates:
no error messages were found on the log files of the bricks.
The error messages appear on the client log files. Writing
from a second client also has the same errors.
Note that if I try to write a directory with 480 6Mb files
to /projects, over 3/4 of the files are written. It is
random which files are not written (i.e. it is not the
last 1/4 of the files which fail)
Hi,
Some additional data
[root@mseas-data save]# gluster volume info
Volume Name: gdata
Type: Distribute
Volume ID: eccc3a90-212d-4563-ae8d-10a77758738d
Status: Started
Number of Bricks: 3
Transport-type: tcp
Bricks:
Brick1: gluster-0-0:/mseas-data-0-0
Brick2: gluster-0-1:/mseas-data-0-1
Brick3: gluster-data:/data
[root@mseas-data save]# gluster volume status
Status of volume: gdata
Gluster process Port
Online Pid
------------------------------------------------------------------------------
Brick gluster-0-0:/mseas-data-0-0 24009 Y
27006
Brick gluster-0-1:/mseas-data-0-1 24009
Y 7063
Brick gluster-data:/data 24010
N 8007
NFS Server on localhost 38467
Y 8013
NFS Server on gluster-0-1 38467 Y
10228
NFS Server on 10.1.1.10 38467
Y 3867
Noticing that the brick gluster-data:/data was appearing as N
in the "online" column, I tried (1) detaching gluster-data (using
gluster peer detach gluster-data issued from gluster-0-0), (2)
removing
/var/lib/glusterd, (3) restarting glusterd on gluster-data,
(4) reattaching /gluster-data (using gluster peer probe gluster-data
issued from gluster-0-0) then (5) restart glusterd one more time
on all
3 bricks. The brick gluster-data:/data still appears as N in the
Online
column.
[root@mseas-data save]# gluster peer status
Number of Peers: 2
Hostname: gluster-0-1
Uuid: 393fc4a6-1573-4564-971e-1b1aec434167
State: Peer in Cluster (Connected)
Hostname: 10.1.1.10
Uuid: 3619440a-4ca3-4151-b62e-d4d6bf2e0c03
State: Peer in Cluster (Connected)
(similarly from the other bricks)
Ping works between all bricks too.
Hi,
We are using gluster to present 3 bricks as a single name space.
We appear to have a situation in which gluster thinks there
is no disk space when there is actually plenty. I have restarted
the glusterd deamons on all three bricks and I still get the
following message
/bin/cp: cannot create regular file
`./Bottom_Gravity_Current_25/344.mat': No space left on device
This is a 6Mbyte file. The total space available on
gluster is 3.6T
Filesystem Size Used Avail Use% Mounted on
mseas-data:/gdata 55T 51T 3.6T 94% /gdata
Also, no single brick is full:
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/the_raid-lv_data
15T 14T 804G 95% /data
Filesystem Size Used Avail Use% Mounted on
/dev/sdb1 21T 18T 2.1T 90% /mseas-data-0-0
Filesystem Size Used Avail Use% Mounted on
/dev/sdb1 21T 20T 784G 97% /mseas-data-0-1
What should we do to fix this problem or look at to diagnose
this problem?
Thanks.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Pat Haley Email: phaley@xxxxxxx
Center for Ocean Engineering Phone: (617) 253-6824
Dept. of Mechanical Engineering Fax: (617) 253-8125
MIT, Room 5-213 http://web.mit.edu/phaley/www/
77 Massachusetts Avenue
Cambridge, MA 02139-4301
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-users
--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Pat Haley Email: phaley@xxxxxxx
Center for Ocean Engineering Phone: (617) 253-6824
Dept. of Mechanical Engineering Fax: (617) 253-8125
MIT, Room 5-213 http://web.mit.edu/phaley/www/
77 Massachusetts Avenue
Cambridge, MA 02139-4301
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-users
------------------------------------------------------------------------
This email and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom they
are addressed. If you are not the original recipient or the person
responsible for delivering the email to the intended recipient, be
advised that you have received this email in error, and that any use,
dissemination, forwarding, printing, or copying of this email is
strictly prohibited. If you received this email in error, please
immediately notify the sender and delete the original.
--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Pat Haley Email: phaley@xxxxxxx
Center for Ocean Engineering Phone: (617) 253-6824
Dept. of Mechanical Engineering Fax: (617) 253-8125
MIT, Room 5-213 http://web.mit.edu/phaley/www/
77 Massachusetts Avenue
Cambridge, MA 02139-4301
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://supercolony.gluster.org/mailman/listinfo/gluster-users
