________________________________ From: Rejy M Cyriac <rcyriac at redhat.com> To: gluster-users at gluster.org Sent: Thursday, September 19, 2013 6:30 PM Subject: Re: Volume Types? On 09/19/2013 02:55 PM, Jake G. wrote: > > Does this mean I need 4 host servers (peers) to do this? > or > Do I could I create 4 bricks within the single distributed volume? > > I am really confused (X_X) > > You would need 4 bricks of 100GB, 2 on each server, and create a distribute-replicate volume, with replica count of 2. The command to be run would be of the syntax given below. gluster volume create <VOL-NAME> replica 2 server1:/bricks/brick1 server2:/bricks/brick1 server1:/bricks/brick2 server1:/bricks/brick2 The order in which the bricks are given in the command is important to specify which bricks form replica sets. Since the replica count given in the above example is 2, server1:/bricks/brick1 - server2:/bricks/brick1 will be a replica set, and server1:/bricks/brick2 - server1:/bricks/brick2 will the other replica set. - rejy (rmc) > > > > ------------------------------------------------------------------------ > *From:* Athanasios Kostopoulos <athanasios.kostopoulos at classmarkets.com> > *To:* Jake G. <dj_dark_junglist at yahoo.com> > *Cc:* "gluster-users at gluster.org" <gluster-users at gluster.org> > *Sent:* Thursday, September 19, 2013 6:07 PM > *Subject:* Re: Volume Types? > > Hi Jake, > glusterFS newbie here so take my email with a big grain of salt. > I *think* that in order to have 200Gb available AND replication > (assuming a replicating factor of 2) you need 4 bricks of 100Gb, not > just 2. > > > On Thu, Sep 19, 2013 at 11:06 AM, Jake G. <dj_dark_junglist at yahoo.com > <mailto:dj_dark_junglist at yahoo.com>> wrote: > >? ? Hi All, > >? ? Wondering if it is possible to create a duplicated and distributed >? ? volume in gluster? > >? ? I have two host servers both with 100GB partition for gluster. > >? ? After creating the volume I would like there to be 200GB available, >? ? but if serverA dies all the files will be still be present on serverB >? ? Is this even possible? If so can it be done with only two host servers? > >? ? Thank you! > > >? ? _______________________________________________ >? ? Gluster-users mailing list >? ? Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> >? ? http://supercolony.gluster.org/mailman/listinfo/gluster-users > > > > classmarkets GmbH | Schumannstra?e 6 | 10117 Berlin | Deutschland > Tel: +49 (0)30 56 59 001-0 | Fax: +49 (0)30 56 59 001-99 > | www.classmarkets.com <http://www.classmarkets.com/> > Amtsgericht Charlottenburg HRB 111815 B | USt.Id.Nr <http://ust.id.nr/>: > DE 260731582 > Gesch?ftsf?hrer: Veit M?rz, Fabian Str?hle > Diese Nachricht (inklusive aller Anh?nge) ist vertraulich. Sie darf > ausschlie?lich durch den vorgesehenen Empf?nger und Adressaten gelesen, > kopiert oder genutzt werden. Sollten Sie diese Nachricht versehentlich > erhalten haben, bitten wir, den Absender (durch Antwort-E-Mail) hiervon > unverz?glich zu informieren und die Nachricht zu l?schen. Jede > unerlaubte Nutzung oder Weitergabe des Inhalts dieser Nachricht, sei es > vollst?ndig oder teilweise, ist unzul?ssig. Bitte beachten Sie, dass > E-Mail-Nachrichten an den Absender nicht f?r fristgebundene Mitteilungen > geeignet sind. Fristgebundene Mitteilungen sind daher ausschlie?lich per > Post oder per Telefax zu ?bersenden. > > > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://supercolony.gluster.org/mailman/listinfo/gluster-users > Thank you for your help! I would like to confirm the command you gave. Should: gluster volume create <VOL-NAME> replica 2 server1:/bricks/brick1?server2:/bricks/brick1 server1:/bricks/brick2 server1:/bricks/brick2 Be: gluster volume create <VOL-NAME> replica 2 server1:/bricks/brick1?server2:/bricks/brick1 server1:/bricks/brick2 server2:/bricks/brick2 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20130919/2f22cb7b/attachment.html>
