Gluster native client very slow

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






Le 06/09/2013 15:15, Vijay Bellur a ?crit :
> On 09/06/2013 05:46 PM, Olivier Desport wrote:
>> Hello,
>>
>> I'm testing a two nodes glusterfs distributed cluster (version 3.3.1-1)
>> on Debian 7. The two nodes write on the same iscsi volume on a SAN.
>>
>> When I try to write an 1G file with dd, I have the following results :
>>
>> NFS : 107 Mbytes/s
>> Gluster client : 8 Mbytes/sec
>>
>
> What is the block size being used with dd? With smaller block sizes, 
> write throughput on native client would be low. If a bigger block size 
> like 128 KB is used, the throughput would be better.
>
> -Vijay
The block size is 1k :

dd if=/dev/zero of=/data/cms/500m-client-gluster-2 bs=1k count=500000



>
>> My /etc/fstab on the client :
>>
>> /etc/glusterfs/cms.vol /data/cms glusterfs defaults 0 0
>>
>> I'd like to use the gluster protocol because it can give me HA. Can you
>> help me to increase the perfs ?
>>
>> Thanks.
>>
>>
>>
>>
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20130906/eaa7c233/attachment.html>


[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux