Hi All, I've been playing with Gluster 3.4x - in particular the nufa configuration. All the setups are via the gluster CLI. A simple nufa config across 2 machines with the subvolumes being bricks works without issue. However anything more complex gives very strange behaviors. For instance the below config. This volume is meant to have a replica set on each machine and then tied together into a nufa config. I then mount nufa4 on BBBHOST and AAAHOST and simulate some writes. This works and the speeds seem to indicate the writes are happening locally. However the strange thing is if you look into any of the brick dirs i.e. /DIR_ON_HOST/test004a/ - no files are present! The volume continues to operate but I am baffled about 1) Where the files are being stored 2) Whether such a configuration is possible i.e a nufa sitting on top of 2 replica systems (and in fact how nufa figures out which replica sit is on the local host). Any insight would be helpful. Thx. hb ---------------- Volume Name: nufa-r4 Type: Replicate Volume ID: d47ceecf-11be-49a3-8b27-9d1df61f588c Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: AAAHOST:/DIR_ON_HOST_A/test004a Brick2: AAAHOST:/DIR_ON_HOST_A/test004b Volume Name: nufa-r4b Type: Replicate Volume ID: 98bc1402-fbd9-4637-81c2-2f24029d51bc Status: Started Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: BBBHOST:/DIR_ON_HOST_B/test004a Brick2: BBBHOST:/DIR_ON_HOST_B/test004b Volume Name: nufa4 Type: Distribute Volume ID: 061a3359-ec92-4ab3-9305-bae783df0ec2 Status: Started Number of Bricks: 2 Transport-type: tcp Bricks: Brick1: AAAHOST:/nufa-r4 Brick2: BBBHOST:/nufa-r4b Options Reconfigured: cluster.nufa: on -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20131015/e8e8e126/attachment.html>
