Thank you! I'll try this! Best regards. 2013/11/22 shwetha <spandura at redhat.com> > Hi Raphael, > > Following are the steps to be followed to sync data from node1 to node2 > assuming node1 has the data. > > 1. gluster peer probe node1 > > 2. gluster volume create gv0 replica 2 node1:/data node2:/data > > 3. gluster volume start gv0 > > 4. gluster volume set gv0 cluster.read-subvolume gv0-client-0 > > 5. Create a fuse mount from the client node to the volume : mount -t > glusterfs node1:/gv0 /mnt/gv0 > > 6. From client node : cd /mnt/gv0 ; find . | xargs stat > > This should self-heal all your data from node1 to node2. > > Once the self-heal is complete reset the "cluster.read-subvolume" volume > option. > > 7. gluster volume reset gv0 cluster.read-subvolume > > 8. Unmount the mount point and remount for using it again. > > Regards > -Shwetha > > > On 11/21/2013 08:51 PM, Raphael Rabelo wrote: > > I guys! > > > i have 2 servers in replicate mode, the node 1 has all data, and the > cluster 2 is empty. > I created a volume (gv0) and start it. > > Now, how can I synchronize all files on the node 1 by the node 2 ? > > Steps that I followed: > > gluster peer probe node1 > gluster volume create gv0 replica 2 node1:/data node2:/data > gluster volume gvo start > > > thanks! > > > _______________________________________________ > Gluster-users mailing listGluster-users at gluster.orghttp://supercolony.gluster.org/mailman/listinfo/gluster-users > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20131122/110ad8b3/attachment.html>
