On Sat, Mar 23, 2013 at 9:08 AM, Brian Foster <bfoster at redhat.com> wrote: > On 03/22/2013 05:11 PM, Patrick Regan wrote: > > I have a 8-node 2 replica Gluster volume mounted with the fuse client. > > We also have an in-house Perl script we use for doing block string > > substitutions. If we run this script on directories on the volume, I > > get the following error on almost every file: > > > > cp: skipping file $FILEPATH as it was replaced while being copied > > > > That error is preceded with the following comment in coreutils: > > /* Compare the source dev/ino from the open file to the incoming, > saved ones obtained via a previous call to stat. */ > > ... which basically means the source inode has changed between the time > this particular function runs a stat on the source path and some > previous call had run the same thing. Had you confirmed which cp command > in your script results in this error (e.g., it looks like you have a cp > to temp and a cp to orig)? > Actually both cp's cause the error to occur. Both the copy to the temp, and the copy from the temp to the original. > > I know nothing about perl (and the lack of indentation in the script > post is making my eyes cross :P), but have you thought about the level > of serialization you're getting in the perl script between the cp > commands and programmatic file access? In other words, is it possible > the work your script invokes via print and `` operators is racing with > the script itself? > My apologies for the lack of indentation. I should have known whitespace would have gotten stripped. Here are links to both the perl and the shell scripts: http://pastebin.com/Q9mxSjS0 - Perl http://pastebin.com/RaS3cxQa - Bash I too am not that much of a Perl expert, so I'll ask a few of my developers here. I'll report back with anything else I can find. Even if it was a race condition, why does it happen with the FUSE client, but not NFS? Thanks, Pat > > Brian > > > If I mount the volume with NFS, this issue does not arise. > > > > I have also tried to replicate the issue using a roughly equivalent > > shell script, but the shell script does not produce the same result on > > either the fuse or the nfs client. > > > > I'll paste my volume log followed by the perl script, followed by my > > rough shell script. > > > > I would appreciate any feedback. > > > > Thanks! > > > > ------------- > > > > [2013-03-22 16:32:52.893362] I [glusterfsd.c:1666:main] > > 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version > > 3.3.1 > > [2013-03-22 16:32:52.932157] I [io-cache.c:1549:check_cache_size_ok] > > 0-usrweb-quick-read: Max cache size is 2124763136 > > [2013-03-22 16:32:52.932634] I [io-cache.c:1549:check_cache_size_ok] > > 0-usrweb-io-cache: Max cache size is 2124763136 > > [2013-03-22 16:32:53.035759] I [client.c:2142:notify] > > 0-usrweb-client-0: parent translators are ready, attempting connect on > > transport > > [2013-03-22 16:32:53.041228] I [client.c:2142:notify] > > 0-usrweb-client-1: parent translators are ready, attempting connect on > > transport > > [2013-03-22 16:32:53.046270] I [client.c:2142:notify] > > 0-usrweb-client-2: parent translators are ready, attempting connect on > > transport > > [2013-03-22 16:32:53.050863] I [client.c:2142:notify] > > 0-usrweb-client-3: parent translators are ready, attempting connect on > > transport > > Given volfile: > > > +------------------------------------------------------------------------------+ > > 1: volume usrweb-client-0 > > 2: type protocol/client > > 3: option remote-host ak001 > > 4: option remote-subvolume /srv/gluster/volusrweb > > 5: option transport-type tcp > > 6: end-volume > > 7: > > 8: volume usrweb-client-1 > > 9: type protocol/client > > 10: option remote-host ak002 > > 11: option remote-subvolume /srv/gluster/volusrweb > > 12: option transport-type tcp > > 13: end-volume > > 14: > > 15: volume usrweb-client-2 > > 16: type protocol/client > > 17: option remote-host ak003 > > 18: option remote-subvolume /srv/gluster/volusrweb > > 19: option transport-type tcp > > 20: end-volume > > 21: > > 22: volume usrweb-client-3 > > 23: type protocol/client > > 24: option remote-host ak004 > > 25: option remote-subvolume /srv/gluster/volusrweb > > 26: option transport-type tcp > > 27: end-volume > > 28: > > 29: volume usrweb-replicate-0 > > 30: type cluster/replicate > > 31: subvolumes usrweb-client-0 usrweb-client-1 > > 32: end-volume > > 33: > > 34: volume usrweb-replicate-1 > > 35: type cluster/replicate > > 36: subvolumes usrweb-client-2 usrweb-client-3 > > 37: end-volume > > 38: > > 39: volume usrweb-dht > > 40: type cluster/distribute > > 41: subvolumes usrweb-replicate-0 usrweb-replicate-1 > > 42: end-volume > > 43: > > 44: volume usrweb-write-behind > > 45: type performance/write-behind > > 46: subvolumes usrweb-dht > > 47: end-volume > > 48: > > 49: volume usrweb-read-ahead > > 50: type performance/read-ahead > > 51: subvolumes usrweb-write-behind > > 52: end-volume > > 53: > > 54: volume usrweb-io-cache > > 55: type performance/io-cache > > 56: subvolumes usrweb-read-ahead > > 57: end-volume > > 58: > > 59: volume usrweb-quick-read > > 60: type performance/quick-read > > 61: subvolumes usrweb-io-cache > > 62: end-volume > > 63: > > 64: volume usrweb-md-cache > > 65: type performance/md-cache > > 66: subvolumes usrweb-quick-read > > 67: end-volume > > 68: > > 69: volume usrweb > > 70: type debug/io-stats > > 71: option latency-measurement off > > 72: option count-fop-hits off > > 73: subvolumes usrweb-md-cache > > 74: end-volume > > > > > +------------------------------------------------------------------------------+ > > [2013-03-22 16:32:53.057710] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 0-usrweb-client-2: changing port to 24010 (from 0) > > [2013-03-22 16:32:53.057895] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 0-usrweb-client-1: changing port to 24010 (from 0) > > [2013-03-22 16:32:53.058025] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 0-usrweb-client-0: changing port to 24010 (from 0) > > [2013-03-22 16:32:53.059259] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 0-usrweb-client-3: changing port to 24010 (from 0) > > [2013-03-22 16:32:56.933277] I > > [client-handshake.c:1636:select_server_supported_programs] > > 0-usrweb-client-2: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:32:56.933966] I > > [client-handshake.c:1433:client_setvolume_cbk] 0-usrweb-client-2: > > Connected to 10.0.8.242:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:32:56.934012] I > > [client-handshake.c:1445:client_setvolume_cbk] 0-usrweb-client-2: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:32:56.934161] I [afr-common.c:3628:afr_notify] > > 0-usrweb-replicate-1: Subvolume 'usrweb-client-2' came back up; going > > online. > > [2013-03-22 16:32:56.934400] I > > [client-handshake.c:453:client_set_lk_version_cbk] 0-usrweb-client-2: > > Server lk version = 1 > > [2013-03-22 16:32:56.938890] I > > [client-handshake.c:1636:select_server_supported_programs] > > 0-usrweb-client-1: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:32:56.939504] I > > [client-handshake.c:1433:client_setvolume_cbk] 0-usrweb-client-1: > > Connected to 10.0.8.241:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:32:56.939553] I > > [client-handshake.c:1445:client_setvolume_cbk] 0-usrweb-client-1: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:32:56.939685] I [afr-common.c:3628:afr_notify] > > 0-usrweb-replicate-0: Subvolume 'usrweb-client-1' came back up; going > > online. > > [2013-03-22 16:32:56.939940] I > > [client-handshake.c:453:client_set_lk_version_cbk] 0-usrweb-client-1: > > Server lk version = 1 > > [2013-03-22 16:32:56.944004] I > > [client-handshake.c:1636:select_server_supported_programs] > > 0-usrweb-client-0: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:32:56.944408] I > > [client-handshake.c:1433:client_setvolume_cbk] 0-usrweb-client-0: > > Connected to 10.0.8.240:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:32:56.944502] I > > [client-handshake.c:1445:client_setvolume_cbk] 0-usrweb-client-0: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:32:56.945219] I > > [client-handshake.c:453:client_set_lk_version_cbk] 0-usrweb-client-0: > > Server lk version = 1 > > [2013-03-22 16:32:56.949911] I > > [client-handshake.c:1636:select_server_supported_programs] > > 0-usrweb-client-3: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:32:56.950480] I > > [client-handshake.c:1433:client_setvolume_cbk] 0-usrweb-client-3: > > Connected to 10.0.8.243:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:32:56.950524] I > > [client-handshake.c:1445:client_setvolume_cbk] 0-usrweb-client-3: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:32:56.998230] I [fuse-bridge.c:4191:fuse_graph_setup] > > 0-fuse: switched to graph 0 > > [2013-03-22 16:32:56.998706] I > > [client-handshake.c:453:client_set_lk_version_cbk] 0-usrweb-client-3: > > Server lk version = 1 > > [2013-03-22 16:32:56.999145] I [fuse-bridge.c:3376:fuse_init] > > 0-glusterfs-fuse: FUSE inited with protocol versions: glusterfs 7.13 > > kernel 7.10 > > [2013-03-22 16:32:57.000718] I > > [afr-common.c:1965:afr_set_root_inode_on_first_lookup] > > 0-usrweb-replicate-0: added root inode > > [2013-03-22 16:32:57.001914] I > > [afr-common.c:1965:afr_set_root_inode_on_first_lookup] > > 0-usrweb-replicate-1: added root inode > > [2013-03-22 16:42:00.074968] I [glusterfsd-mgmt.c:65:mgmt_cbk_spec] > > 0-mgmt: Volume file changed > > [2013-03-22 16:42:02.114686] I [io-cache.c:1549:check_cache_size_ok] > > 1-usrweb-quick-read: Max cache size is 2124763136 > > [2013-03-22 16:42:02.114945] I [io-cache.c:1549:check_cache_size_ok] > > 1-usrweb-io-cache: Max cache size is 2124763136 > > [2013-03-22 16:42:02.265593] I [client.c:2142:notify] > > 1-usrweb-client-0: parent translators are ready, attempting connect on > > transport > > [2013-03-22 16:42:02.270654] I [client.c:2142:notify] > > 1-usrweb-client-1: parent translators are ready, attempting connect on > > transport > > [2013-03-22 16:42:02.275012] I [client.c:2142:notify] > > 1-usrweb-client-2: parent translators are ready, attempting connect on > > transport > > [2013-03-22 16:42:02.279133] I [client.c:2142:notify] > > 1-usrweb-client-3: parent translators are ready, attempting connect on > > transport > > [2013-03-22 16:42:02.283267] I [client.c:2142:notify] > > 1-usrweb-client-4: parent translators are ready, attempting connect on > > transport > > [2013-03-22 16:42:02.287310] I [client.c:2142:notify] > > 1-usrweb-client-5: parent translators are ready, attempting connect on > > transport > > [2013-03-22 16:42:02.291472] I [client.c:2142:notify] > > 1-usrweb-client-6: parent translators are ready, attempting connect on > > transport > > [2013-03-22 16:42:02.295771] I [client.c:2142:notify] > > 1-usrweb-client-7: parent translators are ready, attempting connect on > > transport > > Given volfile: > > > +------------------------------------------------------------------------------+ > > 1: volume usrweb-client-0 > > 2: type protocol/client > > 3: option remote-host ak001 > > 4: option remote-subvolume /srv/gluster/volusrweb > > 5: option transport-type tcp > > 6: end-volume > > 7: > > 8: volume usrweb-client-1 > > 9: type protocol/client > > 10: option remote-host ak002 > > 11: option remote-subvolume /srv/gluster/volusrweb > > 12: option transport-type tcp > > 13: end-volume > > 14: > > 15: volume usrweb-client-2 > > 16: type protocol/client > > 17: option remote-host ak003 > > 18: option remote-subvolume /srv/gluster/volusrweb > > 19: option transport-type tcp > > 20: end-volume > > 21: > > 22: volume usrweb-client-3 > > 23: type protocol/client > > 24: option remote-host ak004 > > 25: option remote-subvolume /srv/gluster/volusrweb > > 26: option transport-type tcp > > 27: end-volume > > 28: > > 29: volume usrweb-client-4 > > 30: type protocol/client > > 31: option remote-host ak005 > > 32: option remote-subvolume /srv/gluster/volusrweb > > 33: option transport-type tcp > > 34: end-volume > > 35: > > 36: volume usrweb-client-5 > > 37: type protocol/client > > 38: option remote-host ak006 > > 39: option remote-subvolume /srv/gluster/volusrweb > > 40: option transport-type tcp > > 41: end-volume > > 42: > > 43: volume usrweb-client-6 > > 44: type protocol/client > > 45: option remote-host ak007 > > 46: option remote-subvolume /srv/gluster/volusrweb > > 47: option transport-type tcp > > 48: end-volume > > 49: > > 50: volume usrweb-client-7 > > 51: type protocol/client > > 52: option remote-host ak008 > > 53: option remote-subvolume /srv/gluster/volusrweb > > 54: option transport-type tcp > > 55: end-volume > > 56: > > 57: volume usrweb-replicate-0 > > 58: type cluster/replicate > > 59: subvolumes usrweb-client-0 usrweb-client-1 > > 60: end-volume > > 61: > > 62: volume usrweb-replicate-1 > > 63: type cluster/replicate > > 64: subvolumes usrweb-client-2 usrweb-client-3 > > 65: end-volume > > 66: > > 67: volume usrweb-replicate-2 > > 68: type cluster/replicate > > 69: subvolumes usrweb-client-4 usrweb-client-5 > > 70: end-volume > > 71: > > 72: volume usrweb-replicate-3 > > 73: type cluster/replicate > > 74: subvolumes usrweb-client-6 usrweb-client-7 > > 75: end-volume > > 76: > > 77: volume usrweb-dht > > 78: type cluster/distribute > > 79: subvolumes usrweb-replicate-0 usrweb-replicate-1 > > usrweb-replicate-2 usrweb-replicate-3 > > 80: end-volume > > 81: > > 82: volume usrweb-write-behind > > 83: type performance/write-behind > > 84: subvolumes usrweb-dht > > 85: end-volume > > 86: > > 87: volume usrweb-read-ahead > > 88: type performance/read-ahead > > 89: subvolumes usrweb-write-behind > > 90: end-volume > > 91: > > 92: volume usrweb-io-cache > > 93: type performance/io-cache > > 94: subvolumes usrweb-read-ahead > > 95: end-volume > > 96: > > 97: volume usrweb-quick-read > > 98: type performance/quick-read > > 99: subvolumes usrweb-io-cache > > 100: end-volume > > 101: > > 102: volume usrweb-md-cache > > 103: type performance/md-cache > > 104: subvolumes usrweb-quick-read > > 105: end-volume > > 106: > > 107: volume usrweb > > 108: type debug/io-stats > > 109: option latency-measurement off > > 110: option count-fop-hits off > > 111: subvolumes usrweb-md-cache > > 112: end-volume > > > > > +------------------------------------------------------------------------------+ > > [2013-03-22 16:42:02.301090] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 1-usrweb-client-0: changing port to 24010 (from 0) > > [2013-03-22 16:42:04.158794] E > > [client-handshake.c:1717:client_query_portmap_cbk] 1-usrweb-client-5: > > failed to get the port number for remote subvolume > > [2013-03-22 16:42:04.159003] I [client.c:2090:client_rpc_notify] > > 1-usrweb-client-5: disconnected > > [2013-03-22 16:42:04.159074] E > > [client-handshake.c:1717:client_query_portmap_cbk] 1-usrweb-client-7: > > failed to get the port number for remote subvolume > > [2013-03-22 16:42:04.159223] I [client.c:2090:client_rpc_notify] > > 1-usrweb-client-7: disconnected > > [2013-03-22 16:42:04.161765] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 1-usrweb-client-3: changing port to 24010 (from 0) > > [2013-03-22 16:42:04.161868] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 1-usrweb-client-2: changing port to 24010 (from 0) > > [2013-03-22 16:42:04.162355] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 1-usrweb-client-1: changing port to 24010 (from 0) > > [2013-03-22 16:42:04.162449] E > > [client-handshake.c:1717:client_query_portmap_cbk] 1-usrweb-client-6: > > failed to get the port number for remote subvolume > > [2013-03-22 16:42:04.162529] E > > [client-handshake.c:1717:client_query_portmap_cbk] 1-usrweb-client-4: > > failed to get the port number for remote subvolume > > [2013-03-22 16:42:04.162625] I [client.c:2090:client_rpc_notify] > > 1-usrweb-client-4: disconnected > > [2013-03-22 16:42:04.162708] E [afr-common.c:3665:afr_notify] > > 1-usrweb-replicate-2: All subvolumes are down. Going offline until > > atleast one of them comes back up. > > [2013-03-22 16:42:04.162765] I [client.c:2090:client_rpc_notify] > > 1-usrweb-client-6: disconnected > > [2013-03-22 16:42:04.162805] E [afr-common.c:3665:afr_notify] > > 1-usrweb-replicate-3: All subvolumes are down. Going offline until > > atleast one of them comes back up. > > [2013-03-22 16:42:05.715027] I > > [client-handshake.c:1636:select_server_supported_programs] > > 1-usrweb-client-0: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:42:05.715447] I > > [client-handshake.c:1433:client_setvolume_cbk] 1-usrweb-client-0: > > Connected to 10.0.8.240:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:42:05.715501] I > > [client-handshake.c:1445:client_setvolume_cbk] 1-usrweb-client-0: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:42:05.715767] I [afr-common.c:3628:afr_notify] > > 1-usrweb-replicate-0: Subvolume 'usrweb-client-0' came back up; going > > online. > > [2013-03-22 16:42:05.715836] I > > [client-handshake.c:453:client_set_lk_version_cbk] 1-usrweb-client-0: > > Server lk version = 1 > > [2013-03-22 16:42:07.722528] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 1-usrweb-client-5: changing port to 24010 (from 0) > > [2013-03-22 16:42:07.727863] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 1-usrweb-client-7: changing port to 24010 (from 0) > > [2013-03-22 16:42:07.732813] I > > [client-handshake.c:1636:select_server_supported_programs] > > 1-usrweb-client-3: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:42:07.733314] I > > [client-handshake.c:1433:client_setvolume_cbk] 1-usrweb-client-3: > > Connected to 10.0.8.243:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:42:07.733358] I > > [client-handshake.c:1445:client_setvolume_cbk] 1-usrweb-client-3: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:42:07.733524] I [afr-common.c:3628:afr_notify] > > 1-usrweb-replicate-1: Subvolume 'usrweb-client-3' came back up; going > > online. > > [2013-03-22 16:42:07.733731] I > > [client-handshake.c:453:client_set_lk_version_cbk] 1-usrweb-client-3: > > Server lk version = 1 > > [2013-03-22 16:42:07.738423] I > > [client-handshake.c:1636:select_server_supported_programs] > > 1-usrweb-client-2: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:42:07.738819] I > > [client-handshake.c:1433:client_setvolume_cbk] 1-usrweb-client-2: > > Connected to 10.0.8.242:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:42:07.738860] I > > [client-handshake.c:1445:client_setvolume_cbk] 1-usrweb-client-2: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:42:07.739276] I > > [client-handshake.c:453:client_set_lk_version_cbk] 1-usrweb-client-2: > > Server lk version = 1 > > [2013-03-22 16:42:07.744321] I > > [client-handshake.c:1636:select_server_supported_programs] > > 1-usrweb-client-1: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:42:07.744874] I > > [client-handshake.c:1433:client_setvolume_cbk] 1-usrweb-client-1: > > Connected to 10.0.8.241:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:42:07.744916] I > > [client-handshake.c:1445:client_setvolume_cbk] 1-usrweb-client-1: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:42:07.798486] I [fuse-bridge.c:4191:fuse_graph_setup] > > 0-fuse: switched to graph 1 > > [2013-03-22 16:42:07.799081] I > > [client-handshake.c:453:client_set_lk_version_cbk] 1-usrweb-client-1: > > Server lk version = 1 > > [2013-03-22 16:42:07.799444] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 1-usrweb-client-6: changing port to 24010 (from 0) > > [2013-03-22 16:42:07.799591] I [rpc-clnt.c:1657:rpc_clnt_reconfig] > > 1-usrweb-client-4: changing port to 24010 (from 0) > > [2013-03-22 16:42:10.771491] I > > [client-handshake.c:1636:select_server_supported_programs] > > 1-usrweb-client-5: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:42:10.776211] I > > [client-handshake.c:1433:client_setvolume_cbk] 1-usrweb-client-5: > > Connected to 10.0.8.245:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:42:10.776323] I > > [client-handshake.c:1445:client_setvolume_cbk] 1-usrweb-client-5: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:42:10.776500] I [afr-common.c:3628:afr_notify] > > 1-usrweb-replicate-2: Subvolume 'usrweb-client-5' came back up; going > > online. > > [2013-03-22 16:42:10.776836] I > > [client-handshake.c:453:client_set_lk_version_cbk] 1-usrweb-client-5: > > Server lk version = 1 > > [2013-03-22 16:42:10.777113] I > > [client-handshake.c:1636:select_server_supported_programs] > > 1-usrweb-client-7: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:42:10.777615] I > > [client-handshake.c:1433:client_setvolume_cbk] 1-usrweb-client-7: > > Connected to 10.0.8.247:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:42:10.777676] I > > [client-handshake.c:1445:client_setvolume_cbk] 1-usrweb-client-7: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:42:10.777866] I [afr-common.c:3628:afr_notify] > > 1-usrweb-replicate-3: Subvolume 'usrweb-client-7' came back up; going > > online. > > [2013-03-22 16:42:10.778129] I > > [client-handshake.c:453:client_set_lk_version_cbk] 1-usrweb-client-7: > > Server lk version = 1 > > [2013-03-22 16:42:11.784150] I > > [client-handshake.c:1636:select_server_supported_programs] > > 1-usrweb-client-6: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:42:11.787025] I > > [client-handshake.c:1433:client_setvolume_cbk] 1-usrweb-client-6: > > Connected to 10.0.8.246:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:42:11.787141] I > > [client-handshake.c:1445:client_setvolume_cbk] 1-usrweb-client-6: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:42:11.788193] I > > [client-handshake.c:453:client_set_lk_version_cbk] 1-usrweb-client-6: > > Server lk version = 1 > > [2013-03-22 16:42:11.789908] I > > [client-handshake.c:1636:select_server_supported_programs] > > 1-usrweb-client-4: Using Program GlusterFS 3.3.1, Num (1298437), > > Version (330) > > [2013-03-22 16:42:11.790334] I > > [client-handshake.c:1433:client_setvolume_cbk] 1-usrweb-client-4: > > Connected to 10.0.8.244:24010, attached to remote volume > > '/srv/gluster/volusrweb'. > > [2013-03-22 16:42:11.790398] I > > [client-handshake.c:1445:client_setvolume_cbk] 1-usrweb-client-4: > > Server and Client lk-version numbers are not same, reopening the fds > > [2013-03-22 16:42:11.790726] I > > [client-handshake.c:453:client_set_lk_version_cbk] 1-usrweb-client-4: > > Server lk version = 1 > > > > ------------------------------ > > > > #!/usr/bin/perl > > > > open(FIND, "find . -print |") || die "Coundn't run find: $!\n"; > > > > $counter = 0; > > FILE: > > while ($filename = <FIND>) > > { > > chop $filename; > > next FILE unless -T$filename; > > if(!open(TEXTFILE, "$filename")) > > { > > print STDERR "Can't open $filename - continuing...\n"; > > next FILE; > > } > > while (<TEXTFILE>) > > { > > $tempfile[$counter] = $_; > > $counter = $counter + 1; > > if (index($tempfile[$counter - 1],$ARGV[0]) >= 0) > > { > > $totalchanges = $totalchanges +1; > > $dummy=`cp -p $filename blocktemp.txt\n`; > > print $dummy; > > print "$filename\n"; > > open(TEMPFILE, "> blocktemp.txt"); > > $tempfile[$counter -1] =~ s/$ARGV[0]/$ARGV[1]/g; > > for($i = 0; $i < $counter; $i++) > > { > > print TEMPFILE "$tempfile[$i]"; > > } > > while (<TEXTFILE>) > > { > > $storage = $_; > > if (index($storage,$ARGV[0]) >= 0) > > { > > $storage =~ s/$ARGV[0]/$ARGV[1]/g; > > $totalchanges = $totalchanges +1; > > } > > print TEMPFILE "$storage"; > > } > > close(TEXTFILE); > > close(TEMPFILE); > > $dummy2=`cp -p blocktemp.txt $filename`; > > print $dummy2; > > $dummy3=`rm blocktemp.txt`; > > print $dummy3; > > } > > } > > close(TEXTFILE); > > $counter = 0; > > } > > print "$totalchanges lines changed\n"; > > > > --------------------------- > > > > #!/bin/bash > > > > FILES=$(find . -type f) > > > > for f in $FILES > > do > > cp -p $f tempfile.tmp > > sed -i "s/$1/$2/g" tempfile.tmp > > cp -p tempfile.tmp $f > > rm tempfile.tmp > > done > > > > -- > > Patrick Regan > > _______________________________________________ > > Gluster-users mailing list > > Gluster-users at gluster.org > > http://supercolony.gluster.org/mailman/listinfo/gluster-users > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20130325/6b56989a/attachment-0001.html>
