Hello, Just to summarize the outcome: * after 00022 have been rebuild and peer probed I was able to initiate and finish 00031 -> 00028 brick replacement without problems. * I did not need to remove 00022 afterwards as starting volume heal full , successfully initiated healing and started replication. What was learned - do not blindly trust error messages and try to run everything in debug mode. When running gluster daemon in debug mode, I was able to see actual reason for stuck operations -- missing 0022 node which still should be holding brick but not available. Also thanks goes for the RedHat guys for this nice project. It may be rough around corners but it is good. > -----Original Message----- > From: Anand Avati [mailto:avati at redhat.com] > Sent: 19 June 2013 22:16 > To: Piliponis, Elvinas : RBB COO > Cc: gluster-users at gluster.org; Vijay Bellur > Subject: Re: Fwd: Unable to remove / replace faulty bricks > > > > > > > Hello, > > > > I have managed to clear pending 0031 to 0028 operation by shutting > > down all the nodes , deleting rb_mount file and editing rb_state file. > > However this did not help reintroduce 00031 to the cluster (0022 also > > but it is offline so no chance to do peer probe). > > > > I have tried to replicate node removal and reattaching on other > > cluster and node did seem to be accepted after peer probe but due to > > no spare servers available for that cluster I was not able to do "brick > replace". > > > > In the gluster config files I do not find anything that might > > indicate that node is not part of cluster: > > * Node is part of glustervmstore-client-24 > > * Subvolume is defined in replica set glustervmstore-replicate-12 > > * Replica set is defined as part of main volume. > > Everything looks like other replica sets. > > > > *** COMMAND: > > gluster volume replace-brick glustervmstore 00031:/mnt/vmstore/brick > > 00028:/mnt/vmstore/brick start > > brick: 00031:/mnt/vmstore/brick does not exist in volume: > > glustervmstore > > > > *** Log file /var/log/glusterfs/etc-glusterfs-glusterd.vol.log extracts: > > On the missing node 00031 > > > > [2013-06-18 12:45:09.328647] I [socket.c:1798:socket_event_handler] > > 0-transport: disconnecting now > > [2013-06-18 12:45:11.983650] I > > [glusterd-handler.c:502:glusterd_handle_cluster_lock] 0-glusterd: > > Received LOCK from uuid: 2d46fb6f-a36a-454a-b0ba-7df324746737 > > [2013-06-18 12:45:11.983723] I [glusterd-utils.c:285:glusterd_lock] > > 0-glusterd: Cluster lock held by 2d46fb6f-a36a-454a-b0ba-7df324746737 > > [2013-06-18 12:45:11.983793] I > > [glusterd-handler.c:1322:glusterd_op_lock_send_resp] 0-glusterd: > > Responded, ret: 0 > > [2013-06-18 12:45:11.991438] I > > [glusterd-handler.c:1366:glusterd_handle_cluster_unlock] 0-glusterd: > > Received UNLOCK from uuid: 2d46fb6f-a36a-454a-b0ba-7df324746737 > > [2013-06-18 12:45:11.991537] I > > [glusterd-handler.c:1342:glusterd_op_unlock_send_resp] 0-glusterd: > > Responded to unlock, ret: 0 > > [2013-06-18 12:45:12.329047] I [socket.c:1798:socket_event_handler] > > 0-transport: disconnecting now > > [2013-06-18 12:45:15.329431] I [socket.c:1798:socket_event_handler] > > 0-transport: disconnecting now > > > > On the node I am attempting to do brick replace 00031 to 00028: > > > > [2013-06-18 12:45:11.982606] I > > [glusterd-replace-brick.c:98:glusterd_handle_replace_brick] 0-glusterd: > > Received replace brick req > > [2013-06-18 12:45:11.982691] I > > [glusterd-replace-brick.c:147:glusterd_handle_replace_brick] 0-glusterd: > > Received replace brick start request > > [2013-06-18 12:45:11.982754] I [glusterd-utils.c:285:glusterd_lock] > > 0-glusterd: Cluster lock held by 2d46fb6f-a36a-454a-b0ba-7df324746737 > > [2013-06-18 12:45:11.982777] I > > [glusterd-handler.c:463:glusterd_op_txn_begin] 0-management: Acquired > > local lock > > [2013-06-18 12:45:11.984772] I > > [glusterd-rpc-ops.c:548:glusterd3_1_cluster_lock_cbk] 0-glusterd: > > Received ACC from uuid: f7860586-f92c-4114-8336-823c223f18c0 > > ..... LOTS of ACC messages ..... > > [2013-06-18 12:45:11.987076] I > > [glusterd-rpc-ops.c:548:glusterd3_1_cluster_lock_cbk] 0-glusterd: > > Received ACC from uuid: c49cfdbe-2af1-4050-bda1-bdd5fd3926b6 > > [2013-06-18 12:45:11.987116] I > > [glusterd-rpc-ops.c:548:glusterd3_1_cluster_lock_cbk] 0-glusterd: > > Received ACC from uuid: 7e9e1cf3-214e-45c8-aa37-4da0def7fb6b > > [2013-06-18 12:45:11.987196] I > > [glusterd-utils.c:857:glusterd_volume_brickinfo_get_by_brick] 0-: brick: > > 00031:/mnt/vmstore/brick > > [2013-06-18 12:45:11.990732] E > > [glusterd-op-sm.c:1999:glusterd_op_ac_send_stage_op] 0-: Staging > > failed > > [2013-06-18 12:45:11.990785] I > > [glusterd-op-sm.c:2039:glusterd_op_ac_send_stage_op] 0-glusterd: Sent > > op req to 0 peers > > [2013-06-18 12:45:11.992356] I > > [glusterd-rpc-ops.c:607:glusterd3_1_cluster_unlock_cbk] 0-glusterd: > > Received ACC from uuid: f0fcb6dd-c4ef-4751-b92e-db27ffd252d4 > > [2013-06-18 12:45:11.992480] I > > [glusterd-rpc-ops.c:607:glusterd3_1_cluster_unlock_cbk] 0-glusterd: > > Received ACC from uuid: 33c008a5-9c11-44d7-95c6-58362211bbe8 > > ..... LOTS of ACC messages ..... > > [2013-06-18 12:45:11.994447] I > > [glusterd-rpc-ops.c:607:glusterd3_1_cluster_unlock_cbk] 0-glusterd: > > Received ACC from uuid: 444a54c6-d4f5-4407-905c-aef4e56e02be > > [2013-06-18 12:45:11.994483] I > > [glusterd-rpc-ops.c:607:glusterd3_1_cluster_unlock_cbk] 0-glusterd: > > Received ACC from uuid: c49cfdbe-2af1-4050-bda1-bdd5fd3926b6 > > [2013-06-18 12:45:11.994527] I > > [glusterd-rpc-ops.c:607:glusterd3_1_cluster_unlock_cbk] 0-glusterd: > > Received ACC from uuid: 7e9e1cf3-214e-45c8-aa37-4da0def7fb6b > > [2013-06-18 12:45:11.994555] I > > [glusterd-op-sm.c:2653:glusterd_op_txn_complete] 0-glusterd: Cleared > > local lock > > [2013-06-18 12:45:12.270020] I [socket.c:1798:socket_event_handler] > > 0-transport: disconnecting now > > > > My attempt manually delete affected replica sets from > > /var/lib/glusterd/vols/glustervmstore > > glustervmstore-fuse.vol > > info > > trusted-glustervmstore-fuse.vol /var/lib/glusterd/glustershd > > glustershd-server.vol > > files totally failed as glusterfs service failed to start at all > > complaining about unknown keys. > > All volfiles are autogenerated based on the info available in the other files > in /var/lib/glusterd/vols/<name>/ (like ./info, ./bricks/*). So to manually fix > your "situation", please make sure the contents in the files ./info, > ./node_state.info ./rbstate ./bricks/* are "proper" (you can either share > them with me offline, or compare them with another volume which is > good), and issue a "gluster volume reset <volname>" to re-write fresh > volfiles. > > It is also a good idea to double check the contents of > /var/lib/glusterd/peers/* is proper too. > > Doing these manual steps and restarting all processes should recover you > from pretty much any situation. > > Back to the cause of the problem - it appears to be the case that the ongoing > replace-brick got messed up when yet another server died. > > A different way of achieving what you want, is to use add-brick + remove- > brick for decommissioning servers (i.e, add-brick the new server > - 00028, and "remove-brick start" the old one - 00031, and "remove-brick > commit" once all the data has drained out). Moving forward this will be the > recommended way to decommission servers. Use replace-brick to only > replace an already dead server - 00022 with its replacement). > > Let us know if the above steps took you back to a healthy state or if you > faced further issues. > > Avati > > > I am using Semiosis 3.3.1 package on Ubuntu 12.04: > > dpkg -l | grep gluster > > rc glusterfs 3.3.0-1 > > clustered file-system > > ii glusterfs-client 3.3.1-ubuntu1~precise8 > > clustered file-system (client package) > > ii glusterfs-common 3.3.1-ubuntu1~precise8 > > GlusterFS common libraries and translator modules > > ii glusterfs-server 3.3.1-ubuntu1~precise8 > > clustered file-system (server package) > > > > Thank you > > > > -----Original Message----- > > From: Vijay Bellur [mailto:vbellur at redhat.com > > <mailto:vbellur at redhat.com>] > > Sent: 18 June 2013 14:33 > > To: Piliponis, Elvinas : RBB COO > > Cc: gluster-users at gluster.org <mailto:gluster-users at gluster.org> > > Subject: Re: Unable to remove / replace faulty bricks > > > > On 06/18/2013 11:43 AM, elvinas.piliponis at barclays.com > > <mailto:elvinas.piliponis at barclays.com> wrote: > > > Hello, > > > > > > When trying to recover from failed node and replace brick with > > spare > one I have trashed my cluster and now it is in stuck state. > > > > > > Any ideas, how to reintroduce/remove those nodes and bring peace > > and > order to cluster? > > > > > > There was a pending brick replacement operation from 0031 to 0028 > > (it > is still not commited according to rbstate file) > > There > > was a hardware failure on 0022 node > > I was not able to commit > > replace brick 0031 due to 0022 was not > responding and not giving > > cluster lock to requesting node. > > > > > > I was not able to start replacement 0022 to 0028 due to pending > > brick > replacement > > I have forced peer removal from cluster, > > hoping that afterwards I > would be able to complete operations. > > Unfortunately I have removes not > only > 0022 but 0031 also. > > > > > > I have peer probed 0031 successfully. But now gluster volume info > > and > volume status both lists 0031 node. But when I attempt to do a > > brick > operation I do get: > > > > > > gluster volume remove-brick glustervmstore 0031:/mnt/vmstore/brick > > > 0036:/mnt/vmstore/brick force > > Removing brick(s) can result in > > data loss. Do you want to Continue? > > > (y/n) y > > > > > > Incorrect brick 0031:/mnt/vmstore/brick for volume glustervmstore > > > > gluster volume replace-brick glustervmstore > > 0031:/mnt/vmstore/brick > 0028:/mnt/vmstore/brick commit force > > > > brick: 0031:/mnt/vmstore/brick does not exist in volume: > > > glustervmstore > > > > > > Looks like these commands are being rejected from a node where the > > volume information is not current. Can you please provide glusterd > > logs from the node where these commands were issued? > > > > Thanks, > > Vijay > > > > > > This e-mail and any attachments are confidential and intended solely > > for the addressee and may also be privileged or exempt from disclosure > > under applicable law. If you are not the addressee, or have received > > this e-mail in error, please notify the sender immediately, delete it > > from your system and do not copy, disclose or otherwise act upon any > > part of this e-mail or its attachments. > > > > Internet communications are not guaranteed to be secure or virus-free. > > The Barclays Group does not accept responsibility for any loss arising > > from unauthorised access to, or interference with, any Internet > > communications by any third party, or from the transmission of any > > viruses. Replies to this e-mail may be monitored by the Barclays Group > > for operational or business reasons. > > > > Any opinion or other information in this e-mail or its attachments > > that does not relate to the business of the Barclays Group is personal > > to the sender and is not given or endorsed by the Barclays Group. > > > > Barclays Bank PLC. Registered in England and Wales (registered no. > > 1026167). > > Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom. > > > > Barclays Bank PLC is authorised by the Prudential Regulation Authority > > and regulated by the Financial Conduct Authority and the Prudential > > Regulation Authority (Financial Services Register No. > > 122702). > > _______________________________________________ > > Gluster-users mailing list > > Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> > > http://supercolony.gluster.org/mailman/listinfo/gluster-users > >
