hi, Could you post output of 'getfattr -d -m . -e hex <fpath>' on both the bricks. Pranith. ----- Original Message ----- From: "Nux!" <nux at li.nux.ro> To: gluster-users at gluster.org Sent: Sunday, October 28, 2012 5:19:31 PM Subject: Re: File has different size on different bricks On 28.10.2012 11:33, Nux! wrote: > The problem: > While server B was rebooting the wget transfer in server A froze for > a few seconds then resumed. When server B came back online it started > to update /brick/rawfile.img from server A, but it's now hours since > everything has finished and on server A rawfile.img has 28GB, but on > server B it has 26GB; so a 2GB difference. > > `gluster volume heal glusterfs1 info split-brain` doesn't indicate > any split brains. > I even tried dd-ing /mnt/glusterfs/rawfile.img to /dev/null in the > hope it will force an update on server B, but no changes. Erm, to clarify why both raw files are bigger than 10GB, that's because besides the 10GB download I did other downloads etc. Btw, for those interested, generating 1000000 tiny files on the glusterfs volume directly takes around 50 minutes in my setup; generating the same 1000000 files in the loop mounted raw file takes ~3 minutes, including flushing the disk cache and unmounting the file. -- Sent from the Delta quadrant using Borg technology! Nux! www.nux.ro _______________________________________________ Gluster-users mailing list Gluster-users at gluster.org http://supercolony.gluster.org/mailman/listinfo/gluster-users
