which OS are you using? I believe 3.3 will install but won't run on older CentOSs (5.7/5.8) due to libc skew. and you did 'modprobe fuse' before you tried to mount it...? hjm On Wed, Jun 27, 2012 at 12:46 PM, Robin, Robin <robinr at muohio.edu> wrote: > Hi, > > Just updated to Gluster-3.3; I can't seem to mount my initial test volume. I > did the mount on the gluster server itself (which works on Gluster-3.2). > > # rpm -qa | grep -i gluster > glusterfs-fuse-3.3.0-1.el6.x86_64 > glusterfs-server-3.3.0-1.el6.x86_64 > glusterfs-3.3.0-1.el6.x86_64 > > # gluster volume info all > > Volume Name: vmvol > Type: Replicate > Volume ID: b105560a-e157-4b94-bac9-39378db6c6c9 > Status: Started > Number of Bricks: 1 x 2 = 2 > Transport-type: tcp > Bricks: > Brick1: mualglup01:/mnt/gluster/vmvol001 > Brick2: mualglup02:/mnt/gluster/vmvol001 > Options Reconfigured: > auth.allow: 127.0.0.1,134.53.*,10.* > > ##?mount -t glusterfs mualglup01.mcs.muohio.edu:vmvol /mnt/test (did this on > the gluster machine itself) > > I'm getting the following in the logs: > +------------------------------------------------------------------------------+ > [2012-06-27 15:40:52.116160] I [rpc-clnt.c:1660:rpc_clnt_reconfig] > 0-vmvol-client-0: changing port to 24009 (from 0) > [2012-06-27 15:40:52.116479] I [rpc-clnt.c:1660:rpc_clnt_reconfig] > 0-vmvol-client-1: changing port to 24009 (from 0) > [2012-06-27 15:40:56.055124] I > [client-handshake.c:1636:select_server_supported_programs] 0-vmvol-client-0: > Using Program GlusterFS 3.3.0, Num (1298437), Version (330) > [2012-06-27 15:40:56.055575] I > [client-handshake.c:1433:client_setvolume_cbk] 0-vmvol-client-0: Connected > to 10.0.72.132:24009, attached to remote volume '/mnt/gluster/vmvol001'. > [2012-06-27 15:40:56.055610] I > [client-handshake.c:1445:client_setvolume_cbk] 0-vmvol-client-0: Server and > Client lk-version numbers are not same, reopening the fds > [2012-06-27 15:40:56.055682] I [afr-common.c:3627:afr_notify] > 0-vmvol-replicate-0: Subvolume 'vmvol-client-0' came back up; going online. > [2012-06-27 15:40:56.055871] I > [client-handshake.c:453:client_set_lk_version_cbk] 0-vmvol-client-0: Server > lk version = 1 > [2012-06-27 15:40:56.057871] I > [client-handshake.c:1636:select_server_supported_programs] 0-vmvol-client-1: > Using Program GlusterFS 3.3.0, Num (1298437), Version (330) > [2012-06-27 15:40:56.058277] I > [client-handshake.c:1433:client_setvolume_cbk] 0-vmvol-client-1: Connected > to 10.0.72.133:24009, attached to remote volume '/mnt/gluster/vmvol001'. > [2012-06-27 15:40:56.058304] I > [client-handshake.c:1445:client_setvolume_cbk] 0-vmvol-client-1: Server and > Client lk-version numbers are not same, reopening the fds > [2012-06-27 15:40:56.063514] I [fuse-bridge.c:4193:fuse_graph_setup] 0-fuse: > switched to graph 0 > [2012-06-27 15:40:56.063638] I > [client-handshake.c:453:client_set_lk_version_cbk] 0-vmvol-client-1: Server > lk version = 1 > [2012-06-27 15:40:56.063802] I [fuse-bridge.c:4093:fuse_thread_proc] 0-fuse: > unmounting /mnt/test > [2012-06-27 15:40:56.064207] W [glusterfsd.c:831:cleanup_and_exit] > (-->/lib64/libc.so.6(clone+0x6d) [0x35f0ce592d] (-->/lib64/libpthread.so.0() > [0x35f14077f1] (-->/usr/sbin/glusterfs(glusterfs_sigwaiter+0xdd) > [0x405cfd]))) 0-: received signum (15), shutting down > [2012-06-27 15:40:56.064250] I [fuse-bridge.c:4643:fini] 0-fuse: Unmounting > '/mnt/test'. > > The server and client should be the same version (as attested by the rpm). > I've seen that some other people are getting the same errors in the archive; > no solutions were offered. > > Any help is appreciated. > > Thanks, > Robin > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users > -- Harry Mangalam - Research Computing, OIT, Rm 225 MSTB, UC Irvine [m/c 2225] / 92697 Google Voice Multiplexer: (949) 478-4487 415 South Circle View Dr, Irvine, CA, 92697 [shipping] MSTB Lat/Long: (33.642025,-117.844414) (paste into Google Maps)
