Hi, NFS Failover with uCARP works very well. I have just a standard uCARP setup and GlusterFS NFS. My initial issue was that mt test box brought up the drive as read only. As soon as I fixed that, failover started working fine. Gerald ----- Original Message ----- > From: "Sean Fulton" <sean at gcnpublishing.com> > To: gluster-users at gluster.org > Sent: Tuesday, June 19, 2012 3:41:27 PM > Subject: Re: Anyone with Gluster NFS failover working? > > I had a linux-ha NFS setup configured, shut down the NFS server > process, > loaded Gluster 3.3 on top, kept rpcbind and one other one loaded, and > the fail-over worked fine. Actually writing to the gluster wasn't > something I want to talk about, but the fail-over worked flawlessly. > I > will note that I had my entries in /etc/exports with fsid set on both > servers, but I don't know if gluster read them. > > > sean > > > On 06/19/2012 03:28 PM, Gerald Brandt wrote: > > Hi, > > > > Does anyone have NFS failover working with Glusters NFS server? > > > > I can't get it to work reliably with Gluster 3.3/Ubuntu > > 12.04/uCARP. > > > > My IP switches over just fine, but XenServer fails to remake the > > connection. > > > > I believe it may be FSID related, but I don't know how to set the > > Gluster NFS FSID. With normal NFS I would just put it in the > > exports file. > > > > Gerald > > > > _______________________________________________ > > Gluster-users mailing list > > Gluster-users at gluster.org > > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users > > > > -- > Sean Fulton > GCN Publishing, Inc. > Internet Design, Development and Consulting For Today's Media > Companies > http://www.gcnpublishing.com > (203) 665-6211, x203 > > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users >
