Amazon EBS and Glusterfs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, 

----- Original Message ----- 

> We are now in a process of creating a Glusterfs based NAS on the
> Amazon EC2 cloud using EBS volume. I did like to hear
> opinions/advices/experiences of how others have done this.

> Our scenario is simple. We need to store large number of static web
> files like images (size less than 2 MB per file), etc and we dont
> need any redundancy for this. But we need very high throughput on a
> high concurrency usage

...

> Now assume for the the tests we take 2 cc1.4xlarge servers each with
> 4 EBS disks, then which would be better

> 1. Create RAID0 for the 4 disks on each server and then use the 2
> raid0 devices in distribute
> 2. Create Glusterfs stripe volume with the 4 disks on each server and
> then the 2 servers in distribute mode.
> 3. Create 4 stripe volumes using one disk from one server and one
> disk from the other, then use distribute on the 4 stripe volume.

> Any inputs will be highly appreciated.

So a couple of things:

1. I'm not sure what striping gets you in this scenario, over and above the more common distributed setup. 
2. a replica 2 setup of glusterfs will give you better consistency for EBS performance, because it will essentially average out the latency of the EBS bricks. However, you're still limited by EBS latency.

If no one else offers you help here, I would hop over to #gluster on irc.freenode.net in the mornings (PST and EST). 

Also, if you're interested, Red Hat will be offering a Red Hat Storage AMI in the very near future. Depending on your needs, that might help.


[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux