I thought Gluster only ran on 64 bit machines? On 01/13/2012 08:04 AM, Kwasi Gyasi - Agyei wrote: > Hi, > > > After installing GlusterFS 3.2.5 using yum on 32bit machine I came > across an issue I don't quite understand. > > 1. Executing the command # glustered -start , does nothing it appears > that you can just start GlusterFS with command # glusterd > 2. glistered expected a file /etc/glusterfs/glusterd.vol , this is not > documented in administration guide > > I created a vol file as expected bu glusterFS, but when I start it up > in debug mode > > # gluster --debug > > I get the following, not sure if this means it is up and running, > > [2012-01-13 06:17:31.808266] I [glusterfsd.c:1493:main] 0-glusterd: > Started running glusterd version 3.2.5 > [2012-01-13 06:17:31.808472] D [glusterfsd.c:374:get_volfp] > 0-glusterfsd: loading volume file /etc/glusterfs/glusterd.vol > [2012-01-13 06:17:31.809319] D [xlator.c:1302:xlator_dynload] > 0-xlator: dlsym(reconfigure) on > /usr/lib/glusterfs/3.2.5/xlator/storage/posix.so: undefined symbol: > reconfigure -- neglecting > [2012-01-13 06:17:31.809394] D [xlator.c:1308:xlator_dynload] > 0-xlator: dlsym(validate_options) on > /usr/lib/glusterfs/3.2.5/xlator/storage/posix.so: undefined symbol: > validate_options -- neglecting > [2012-01-13 06:17:31.809702] D [xlator.c:1285:xlator_dynload] > 0-xlator: dlsym(notify) on > /usr/lib/glusterfs/3.2.5/xlator/features/posix-locks.so: undefined > symbol: notify -- neglecting > [2012-01-13 06:17:31.809789] D [xlator.c:1302:xlator_dynload] > 0-xlator: dlsym(reconfigure) on > /usr/lib/glusterfs/3.2.5/xlator/features/posix-locks.so: undefined > symbol: reconfigure -- neglecting > [2012-01-13 06:17:31.809882] D [xlator.c:1308:xlator_dynload] > 0-xlator: dlsym(validate_options) on > /usr/lib/glusterfs/3.2.5/xlator/features/posix-locks.so: undefined > symbol: validate_options -- neglecting > [2012-01-13 06:17:31.811481] D [rpcsvc.c:1771:rpcsvc_init] > 0-rpc-service: RPC service inited. > [2012-01-13 06:17:31.811570] D [rpcsvc.c:1568:rpcsvc_program_register] > 0-rpc-service: New program registered: GF-DUMP, Num: 123451501, Ver: > 1, Port: 0 > [2012-01-13 06:17:31.811658] D > [rpc-transport.c:673:rpc_transport_load] 0-rpc-transport: attempt to > load file /usr/lib/glusterfs/3.2.5/rpc-transport/socket.so > [2012-01-13 06:17:31.811938] D [name.c:552:server_fill_address_family] > 0-tcp.server: option address-family not specified, defaulting to > inet/inet6 > [2012-01-13 06:17:31.812305] D [rpcsvc.c:1568:rpcsvc_program_register] > 0-rpc-service: New program registered: GlusterFS 3.2.5, Num: 1298437, > Ver: 310, Port: 0 > [2012-01-13 06:17:31.812368] D [rpcsvc.c:1568:rpcsvc_program_register] > 0-rpc-service: New program registered: GlusterFS Handshake, Num: > 14398633, Ver: 1, Port: 0 > [2012-01-13 06:17:31.812469] W [posix.c:4733:init] 0-raw: Posix access > control list is not supported. > Given volfile: > +------------------------------------------------------------------------------+ > 1: volume raw > 2: type storage/posix > 3: option directory /fileserver > 4: end-volume > 5: > 6: volume brick > 7: type features/posix-locks > 8: subvolumes raw > 9: end-volume > 10: > 11: volume server > 12: type protocol/server > 13: option transport-type tcp > 14: subvolumes brick > 15: option auth.addr.brick.allow * > 16: end-volume > > +------------------------------------------------------------------------------+ > > when I issue command #gluster peer probe hostname on the same machine > running glusterFS, I get the following > > [2012-01-13 06:20:47.382363] W [rpcsvc.c:148:rpcsvc_program_actor] > 0-rpc-service: RPC program not available (req 1238463 1) > [2012-01-13 06:20:47.382497] W [rpcsvc.c:1066:rpcsvc_error_reply] > (-->/usr/lib/libgfrpc.so.0(rpc_transport_notify+0x3d) [0x4a46c7cd] > (-->/usr/lib/libgfrpc.so.0(rpcsvc_notify+0xb8) [0x4a46bcb8] > (-->/usr/lib/libgfrpc.so.0(rpcsvc_handle_rpc_call+0xdf) > [0x4a46b98f]))) 0-: sending a RPC error reply > [2012-01-13 06:20:47.384206] D [socket.c:193:__socket_rwv] > 0-tcp.server: EOF from peer 127.0.0.1:1021 > [2012-01-13 06:20:47.384247] W > [socket.c:1494:__socket_proto_state_machine] 0-tcp.server: reading > from socket failed. Error (Transport endpoint is not connected), peer > (127.0.0.1:1021) > [2012-01-13 06:20:47.384270] D [socket.c:1768:socket_event_handler] > 0-transport: disconnecting now > [2012-01-13 06:20:47.384338] I [server.c:438:server_rpc_notify] > 0-server: disconnected connection from 127.0.0.1:1021 > > The seems to be a few steps missing from the user/administration menu I think. > > > 4Things > Multimedia and Communication | Property | Entertainment > Kwasi Owusu Gyasi - Agyei > > cell (+27) (0) 76 466 4488 > website www.4things.co.za > email kwasi.gyasiagyei at 4things.co.za > skype kwasi.gyasiagyei > role Developer.Designer.Software Architect > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users -- Daniel Taylor VP Operations Vocal Laboratories, Inc dtaylor at vocalabs.com 952-941-6580x203