Hi - >It sends all the data on machine 1 instead of sending the data to machine1 and 2 both. Use AFR(replicate) instead of distribute, if you want data on both machines. For more check - http://gluster.com/community/documentation/index.php/Gluster_3.2:_Configuring_Distributed_Replicated_Volumes >I am using Glusterfs2.0.9 for fedora 12 2.0.9 is very old version. Please use 3.2.x. -- ---- Cheers, Lakshmipathi.G FOSS Programmer. ----- Original Message ----- From: "sonali.gupta" <sonali.gupta at 99acres.com> To: Gluster-users at gluster.org Sent: Wednesday, May 18, 2011 4:56:50 PM Subject: Problem with distribute translator. Hi, I am a newbie at GlusterFs. I have a scenario of two machines, machine 1(client1 and server1) and machine 2(server2). I have client configuration file as having two bricks as server1 and server2. I have added the distribute translator to the client configuration file. On seeing the disk usage it gives the correct output, but while putting the data is does not distribute. It sends all the data on machine 1 instead of sending the data to machine1 and 2 both. I am using Glusterfs2.0.9 for fedora 12 Please help, I am unable to track any issue. Regards, Sonali. DISCLAIMER This email is intended only for the person or the entity to whom it is addressed and may contain information which is confidential and privileged. Any review, retransmission, dissemination or any other use of the said information by person or entities other than intended recipient is unauthorized and prohibited. If you are not the intended recipient, please delete this email and contact the sender. _______________________________________________ Gluster-users mailing list Gluster-users at gluster.org http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
