Quick question regarding xfs_repair

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I'm guessing since Gluster was striping across this and 3 other nodes, I'm
pretty much left with whatever data I was able to backup prior to this
happening and whatever I was lucky enough to get from the gluster system
that didn't have stripes on this node. I still haven't heard if gluster will
fail on a copy if the file could not be fully constructed from the stripes.

I suppose it's time for some diagnostics to see if the node is worth
rebuilding or I need to order anything.

Thanks Joe.

Terry

-----Original Message-----
From: Joe Landman [mailto:landman at scalableinformatics.com] 
Sent: Tuesday, March 15, 2011 10:33 AM
To: Terry Haley
Cc: gluster-users at gluster.org
Subject: Re: Quick question regarding xfs_repair

On 03/15/2011 10:32 AM, Terry Haley wrote:
> I did so and received the same error:
>
> [root at temporal002 ~]# xfs_repair /dev/sdd
> Phase 1 - find and verify superblock...
> superblock read failed, offset 0, size 524288, ag 0, rval -1
>
> fatal error -- Input/output error
>
> My messages file looks like this:
>
> Mar 15 10:34:28 temporal002 kernel: sd 7:0:0:0: SCSI error: return code =
> 0x08000002
> Mar 15 10:34:28 temporal002 kernel: sdd: Current: sense key: Hardware
Error
> Mar 15 10:34:28 temporal002 kernel:     Add. Sense: Internal target
failure
> Mar 15 10:34:28 temporal002 kernel:
> Mar 15 10:34:28 temporal002 kernel: end_request: I/O error, dev sdd,
sector
> 0

Ok, thats a hardware error.  The file system may (or may not) be intact. 
  The RAID/disk however, is probably toast.




-- 
Joseph Landman, Ph.D
Founder and CEO
Scalable Informatics Inc.
email: landman at scalableinformatics.com
web  : http://scalableinformatics.com
        http://scalableinformatics.com/sicluster
phone: +1 734 786 8423 x121
fax  : +1 866 888 3112
cell : +1 734 612 4615



The information in this e-mail is intended only for the person to whom it is
addressed. If you believe this e-mail was sent to you in error and the e-mail
contains patient information, please contact the Partners Compliance HelpLine at
http://www.partners.org/complianceline . If the e-mail was sent to you in error
but does not contain patient information, please contact the sender and properly
dispose of the e-mail.



[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux