Ok. I think I tracked it down. Apparently, the server GUI is to blame. It umounts two of the data volumes on logout. From: gluster-users-bounces at gluster.org [mailto:gluster-users-bounces at gluster.org] On Behalf Of Terry Haley Sent: Friday, July 15, 2011 12:06 PM To: gluster-users at gluster.org Subject: Strange Behavior using FUSE client I've recently setup a distributed/replicated cluster and have had an issue with seeing the directories on the cluster. Also, a df -h only shows data from one of the three bricks. The strange behavior doesn't end there. If I log into the 'primary' server as root, then do an ls on the client, the directories appear. However, df -h is still incorrect. I'm not sure exactly where to start on this. Here's the volume info: Volume Name: macf-mirror Type: Distributed-Replicate Status: Started Number of Bricks: 3 x 2 = 6 Transport-type: tcp Bricks: Brick1: cortex-dr-001.dfci.harvard.edu:/mnt/data01 Brick1: cortex-dr-002.dfci.harvard.edu:/mnt/data01 Brick1: cortex-dr-001.dfci.harvard.edu:/mnt/data02 Brick1: cortex-dr-002.dfci.harvard.edu:/mnt/data02 Brick1: cortex-dr-001.dfci.harvard.edu:/mnt/data03 Brick1: cortex-dr-002.dfci.harvard.edu:/mnt/data03 A df -h on the cortex-dr-001: Filesystem Size Used Avail Use% Mounted on /dev/md2 66G 4.6G 58G 8% / /dev/md0 71G 186M 68G 1% /opt tmpfs 5.9G 0 5.9G 0% /dev/shm /dev/sde1 17T 83G 17T 1% /mnt/data03 /dev/sdd1 39T 182G 38T 1% /mnt/data02 /dev/sdc1 39T 81G 39T 1% /mnt/data01 A df -h from the client: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 12G 7.7G 3.4G 70% / /dev/sda1 99M 29M 65M 31% /boot tmpfs 1006M 0 1006M 0% /dev/shm glusterfs#cortex-dr-001.dfci.harvard.edu:/macf-mirror 17T 92G 17T 1% /mnt/mirror Any suggestions and where/what to look at would be appreciated. Thanks, Terry The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://gluster.org/pipermail/gluster-users/attachments/20110715/192a817f/attachment-0001.htm>
