You should also be able to use server console during boot time to setup raid. Check hw dove Sent from my iPad On Jul 15, 2011, at 2:05 AM, Liam Slusser <lslusser at gmail.com> wrote: > That's not a hardware raid controller. The raid is done in software > via the raid driver. You can probably find a linux driver however its > a really really crappy raid card. I'd recommend getting something > else like a 3ware/lsi etc. > > liam > > On Fri, Jul 15, 2011 at 1:55 AM, Derk Roesink <derkroesink at viditech.nl> wrote: >> Hello! >> >> Im trying to install my first Gluster Storage Platform server. >> >> It has a Jetway JNF99FL-525-LF motherboard with an internal raid >> controller (based on a Intel ICH9R chipset) which has 4x 1tb drives for >> data that i would like to run in a RAID5 configuration >> >> It seems Gluster doesnt support the raid controller.. Because i still see >> the 4 disks as 'servers' in the WebUI. >> >> Any ideas?! >> >> Kind Regards, >> >> Derk >> >> >> >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users at gluster.org >> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users >> > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
