Thanks, Mohit
(2011/08/16 8:05), Mohit Anchlia wrote:
> What's in your logs?
I can obtain logs needed. could you tell me the instruction to take the logs?
>
> Did you have foo-3-private before in your gluster cluster ever or
> adding this host for the first time?
It was first time.
All foo-X-private has no entries in /etc/glusterd/peers/ and /etc/glusterd/vols/.
>
> Try gluster peer detach and then remove any left over configuration in
> /etc/glusterd config directory. After that try again and see if that
> works.
[root at vhead-010 ~]# date
Tue Aug 16 08:17:49 JST 2011
[root at vhead-010 ~]# cat a.sh
#!/bin/bash
for i in foo-{1..3}-private
do
ssh ${i} service glusterd stop
ssh ${i} rm -rf /etc/glusterd/peers/*
ssh ${i} rm -rf /etc/glusterd/vols/*
ssh ${i} service glusterd start
ssh ${i} find /etc/glusterd
done
[root at vhead-010 ~]# bash a.sh
Stopping glusterd:[ OK ]
Starting glusterd:[ OK ]
/etc/glusterd
/etc/glusterd/glusterd.info
/etc/glusterd/nfs
/etc/glusterd/nfs/nfs-server.vol
/etc/glusterd/nfs/run
/etc/glusterd/peers
/etc/glusterd/vols
Stopping glusterd:[ OK ]
Starting glusterd:[ OK ]
/etc/glusterd
/etc/glusterd/glusterd.info
/etc/glusterd/nfs
/etc/glusterd/nfs/nfs-server.vol
/etc/glusterd/nfs/run
/etc/glusterd/peers
/etc/glusterd/vols
Stopping glusterd:[ OK ]
Starting glusterd:[ OK ]
/etc/glusterd
/etc/glusterd/glusterd.info
/etc/glusterd/nfs
/etc/glusterd/nfs/nfs-server.vol
/etc/glusterd/nfs/run
/etc/glusterd/peers
/etc/glusterd/vols
[root at vhead-010 ~]# ssh foo-1-private
[root at localhost ~]# gluster peer probe foo-2-private
Probe successful
[root at localhost ~]# gluster peer status
Number of Peers: 1
Hostname: foo-2-private
Uuid: c2b314ac-6ed1-455a-84d4-ec22041ee2b2
State: Peer in Cluster (Connected)
[root at localhost ~]# gluster volume create foo foo-1-private:/mnt/brick
Creation of volume foo has been successful. Please start the volume to access da
ta.
[root at localhost ~]# gluster volume start foo
Starting volume foo has been successful
[root at localhost ~]# gluster volume add-brick foo foo-2-private:/mnt/brick
Add Brick successful
[root at localhost ~]# gluster peer probe foo-3-private
Probe successful
[root at localhost ~]# gluster peer status
Number of Peers: 2
Hostname: foo-2-private
Uuid: c2b314ac-6ed1-455a-84d4-ec22041ee2b2
State: Peer in Cluster (Connected)
Hostname: foo-3-private
Uuid: 7fb98dac-fef7-4b33-837c-6483a767ec3e
State: Peer Rejected (Connected)
[root at localhost ~]# cat /var/log/glusterfs/.cmd_log_history
...
[2011-08-16 08:20:28.862619] peer probe : on host foo-2-private:24007
[2011-08-16 08:20:28.912419] peer probe : on host foo-2-private:24007 FAILED
[2011-08-16 08:20:58.382350] Volume create : on volname: foo attempted
[2011-08-16 08:20:58.382461] Volume create : on volname: foo type:DEFAULT count:
1 bricks: foo-1-private:/mnt/brick
[2011-08-16 08:20:58.384674] Volume create : on volname: foo SUCCESS
[2011-08-16 08:21:04.831772] volume start : on volname: foo SUCCESS
[2011-08-16 08:21:22.682292] Volume add-brick : on volname: foo attempted
[2011-08-16 08:21:22.682385] Volume add-brick : volname: foo type DEFAULT count:
1 bricks: foo-2-private:/mnt/brick
[2011-08-16 08:21:22.682499] Volume add-brick : on volname: foo SUCCESS
[2011-08-16 08:21:39.124574] peer probe : on host foo-3-private:24007
[2011-08-16 08:21:39.135609] peer probe : on host foo-3-private:24007 FAILED
Tomo
>
>
>
> On Mon, Aug 15, 2011 at 3:37 PM, Tomoaki Sato<tsato at valinux.co.jp> wrote:
>> Hi,
>>
>> following instructions work fine with 3.1.5-1 but with 3.1.6-1.
>>
>> 1. make a new file system without peers. [OK]
>>
>> foo-1-private# gluster volume create foo foo-1-private:/mnt/brick
>> foo-1-private# gluster volume start foo
>> foo-1-private# gluster peer status
>> No peers present
>> foo-1-private#
>>
>> 2. add a peer to the file system. [NG]
>>
>> foo-1-private# gluster peer probe foo-2-private
>> Probe successful
>> foo-1-private# gluster peer status
>> Number of Peers: 1
>>
>> Hostname: foo-2-private
>> Uuid: c2b314ac-6ed1-455a-84d4-ec22041ee2b2
>> State: Peer Rejected (Connected)
>> foo-1-private# gluster volume add-brick foo foo-2-private:/mnt/brick
>> Host foo-2-private not connected
>> foo-1-private#
>>
>>
>> following instructions work fine even with 3.1.6-1.
>>
>> 1. make a new file system with single peer. [OK]
>>
>> foo-1-private# gluster peer status
>> No peer presents
>> foo-1-private# gluster peer probe foo-2-private
>> Probe successful
>> foo-1-private# gluster peer status
>> Number of Peers: 1
>>
>> Hostname: foo-2-private
>> Uuid: c2b314ac-6ed1-455a-84d4-ec22041ee2b2
>> State: Peer in Cluster (Connected)
>> foo-1-private# gluster volume create foo foo-1-private:/mnt/brick
>> Creation of volume foo has been successful. Please start the volume to access data.
>> foo-1-private# gluster volume start foo
>> Starting volume foo has been successful
>> foo-1-private# gluster volume add-brick foo foo-2-private:/mnt/brick
>> Add Brick successful
>> foo-1-private#
>>
>> But ...
>>
>> 2. add a peer to the file system. [NG]
>>
>> foo-1-private# gluster peer probe foo-3-private
>> Probe successful
>> foo-1-private# gluster peer status
>> Number of Peers: 2
>>
>> Hostname: foo-2-private
>> Uuid: c2b314ac-6ed1-455a-84d4-ec22041ee2b2
>> State: Peer in Cluster (Connected)
>>
>> Hostname: foo-3-private
>> Uuid: 7fb98dac-fef704b33-837c-6483a767ec3e
>> State: Peer Rejected (Connected)
>> foo-1-private# gluster volume add-brick foo foo-3-private:/mnt/brick
>> Host foo-3-private not connected
>> foo-1-private#
>>
>> How should I add extra peers to existing file systems ?
>>
>> Best,
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>>
