rebalancing after remove-brick

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

I succeed to remove a pair of bricks from my dht+afr system, but my system
is not configured by the command line tool 'gluster', instead, I wrote
configuration files and run glusterfs+glusterfsd process to start the system
by hand. so it may  differ with yours,  anyway just for a reference.

1. Remove the target replica set from the system. Update the configuration
    file of the original system and restart the glusterfs process.

2. Create a dummy GlusterFS system with the removed replica set and mount it
    on a directory.

3. Copy the data from the dummy GlusterFS system to the original system.



-----Original Message----- 
From: Vincent Thomasset
Sent: Friday, April 22, 2011 3:51 PM
To: gluster-users at gluster.org
Subject: rebalancing after remove-brick

Hello,

I'm having trouble migrating data from 1 removed replica set to
another active one in a dist replicated volume.

My test scenario is the following:

- create set (A)
- create a bunch of files on it
- add another set (B)
- rebalance (works fine)
- remove-brick A
- rebalance (doesn't rebalance - ran on one brick in each set)

The doc seems to imply that it is possible to remove bricks
and rebalance afterwards, is this incorrect ? Or should I maybe
use replace-brick instead for this ?

Thanks a lot,
Vincent
_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org
http://gluster.org/cgi-bin/mailman/listinfo/gluster-users 



[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux