Hi Jacob Thanks for the support. I am using the IP to connect. I found it is easy to deploy nfs on glusterfs server and share the volume to any hypervisor. Thanks and Regards, Kaushik Team Lead | Support Team | i2k2 Networks (P) Ltd. D-37, Sector 63, Noida - 201 301 | +91 120 466 3000 (B) | +91 120 466 3027 (D) www.i2k2.com | www.i2k2designs.com | www.i2k2sem.com On Wed, Nov 3, 2010 at 8:46 PM, Jacob Shucart <jacob at gluster.com> wrote: > I have also seen this when there are errors in /etc/hosts. For example, > try putting the hostname of the system under the 127.0.0.1 entry and see > if that works. > > Alternatively, you can try using IP addresses to understand if the problem > is related to the hostname. > > -----Original Message----- > From: gluster-users-bounces at gluster.org > [mailto:gluster-users-bounces at gluster.org] On Behalf Of Richard Shade > Sent: Tuesday, November 02, 2010 4:24 PM > To: Michael Robbert > Cc: gluster-users at gluster.org; kaushik chatterjee > Subject: Re: error in glusterfs volume creation > > Can you send your probe and create commands? I had to run hostname on my > two servers and set the hostname to the name in the probe.. > > On Tue, Nov 2, 2010 at 11:43 AM, Michael Robbert <mrobbert at mines.edu> > wrote: > > > Kaushik, > > What version are you running? There have been some bugs related to this. > > Also what is the output of hostname? > > > > Mike Robbert > > > > On Nov 1, 2010, at 10:54 AM, kaushik chatterjee wrote: > > > > > Hi > > > I am a newbie in glusterfs. I have created 2 servers with glusterfs. > > > Now from server one i can see the peer but whenever trying to create > > > volume > > its > > > says *creation of volume unsuccessful, host is not your friend*. > > > > > > Any help please. > > > > > > > > > > > > Thanks and Regards, > > > > > > Kaushik > > > <ATT00002..txt> > > > > _______________________________________________ > > Gluster-users mailing list > > Gluster-users at gluster.org > > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users > > > > > > -- > Thanks, > > Richard Shade > Integration Engineer > RightScale - http://www.rightscale.com/ > phone: 8055004164x1018 >
