Cant connect from windows client

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sandeep,

Can you please provide more information about your setup and what you want to accomplish. Additionally, please share your config files.

Regards,
Tejas.
----- Original Message -----
From: "sandeep dude" <sandeepvfx2006 at gmail.com>
To: gluster-users at gluster.org
Sent: Thursday, July 1, 2010 11:30:42 PM
Subject: Cant connect from windows client

Hi Friends,

Installed both 3.0.3 and 3.0.4 Glusterfs on an Asus M2N68AM and M3A78EM
which has onboard realtek and nvidia ethernet. Everything got installed and
vols were created successfully but i cant get connected to the shared folder
im entering the ip as 193.168.0.101 and im trying to type  in the command in
run as  \\193.168.0.101\e and unable to connect can u tell me what would be
wrong with this setup... i tried both but nothing was working. I got pretty
impressed by the gluster capabilities but unfortunate that i can use it...
Im plugging this in an 10/100 ethernet switch....

I believe anything wrong with the speeds? or the speed of the switch? Im
using the xp64 I tried to access from xp32bit also  but no use...
no errors or warnings or in the log everything is smooth but cant get
connected...

can anybody guide me please?

regards,
Sandy

_______________________________________________
Gluster-users mailing list
Gluster-users at gluster.org
http://gluster.org/cgi-bin/mailman/listinfo/gluster-users


[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux