Hi, Is the volume spec file (by default it will be /etc/glusterfs/glusterfs.vol) same on all the servers? If not, delete the file from servers, which are not volfile-servers (other than 192.168.1.1 here) or make sure you have the same file on all the servers. regards, On Mon, Jan 11, 2010 at 7:06 PM, <j.bittner at nbu.cz> wrote: > > Hi all, > > I have glusterFS at version 3.0.0 on debian testing and I have this > problem: > > [2010-01-11 15:58:45] W [socket.c:1407:socket_init] trans: disabling > non-blocking IO > [2010-01-11 15:58:45] W [socket.c:1407:socket_init] trans: disabling > non-blocking IO > > ================================================================================ > Version : glusterfs 3.0.0 built on Dec 9 2009 12:15:42 > git: 2.0.1-886-g8379edd > Starting Time: 2010-01-11 15:58:45 > Command line : /usr/sbin/glusterfs --volfile-server=192.168.2.11 /mnt/ > PID : 3070 > System name : Linux > Nodename : B125-GMHI-XXX > Kernel Release : 2.6.31-14-generic > Hardware Identifier: i686 > > Given volfile: > > +------------------------------------------------------------------------------+ > 1: # RAID 1 > 2: # TRANSPORT-TYPE tcp > 3: volume prema-1 > 4: type protocol/client > 5: option transport-type tcp > 6: option remote-host prema > 7: option transport.socket.nodelay on > 8: option remote-port 6996 > 9: option remote-subvolume brick > 10: end-volume > 11: > 12: volume britain-1 > 13: type protocol/client > 14: option transport-type tcp > 15: option remote-host britain > 16: option transport.socket.nodelay on > 17: option remote-port 6996 > 18: option remote-subvolume brick > 19: end-volume > 20: > 21: volume mirror-0 > 22: type cluster/replicate > 23: subvolumes britain-1 prema-1 > 24: end-volume > 25: > 26: volume writebehind > 27: type performance/write-behind > 28: option cache-size 4MB > 29: subvolumes mirror-0 > 30: end-volume > 31: > 32: volume readahead > 33: type performance/read-ahead > 34: option page-count 4 > 35: subvolumes writebehind > 36: end-volume > 37: > 38: volume iocache > 39: type performance/io-cache > 40: option cache-size 1GB > 41: option cache-timeout 1 > 42: subvolumes readahead > 43: end-volume > 44: > 45: volume quickread > 46: type performance/quick-read > 47: option cache-timeout 1 > 48: option max-file-size 64kB > 49: subvolumes iocache > 50: end-volume > 51: > 52: volume statprefetch > 53: type performance/stat-prefetch > 54: subvolumes quickread > 55: end-volume > 56: > > > +------------------------------------------------------------------------------+ > [2010-01-11 15:58:45] N [glusterfsd.c:1361:main] glusterfs: Successfully > started > [2010-01-11 15:58:45] N [client-protocol.c:6224:client_setvolume_cbk] > britain-1: Connected to 192.168.2.11:6996, attached to remote volume > 'brick'. > [2010-01-11 15:58:45] N [afr.c:2625:notify] mirror-0: Subvolume 'britain-1' > came back up; going online. > [2010-01-11 15:58:45] N [client-protocol.c:6224:client_setvolume_cbk] > britain-1: Connected to 192.168.2.11:6996, attached to remote volume > 'brick'. > [2010-01-11 15:58:45] N [afr.c:2625:notify] mirror-0: Subvolume 'britain-1' > came back up; going online. > [2010-01-11 15:58:45] E [client-protocol.c:6187:client_setvolume_cbk] > prema-1: SETVOLUME on remote-host failed: volume-file checksum varies from > earlier access > [2010-01-11 15:58:45] C [fuse-bridge.c:3300:notify] fuse: Remote volume > file changed, try re-mounting. > [2010-01-11 15:58:45] W [glusterfsd.c:928:cleanup_and_exit] glusterfs: > shutting down > [2010-01-11 15:58:45] N [fuse-bridge.c:3519:fini] fuse: Unmounting '/mnt/'. > [2010-01-11 15:58:45] N [fuse-bridge.c:3119:fuse_thread_proc] > glusterfs-fuse: terminating upon getting EBADF when reading /dev/fuse > [2010-01-11 15:58:45] W [glusterfsd.c:928:cleanup_and_exit] glusterfs: > shutting down > > But if I do it this way "mount -t glusterfs /etc/glusterfs/glusterfs.vol > /mnt/"(with the same glusterfs.vol settings) it works correctly. I dont know > where is the problem. Do anyone know? > > ---------------------------------------------------------------- > This message was sent using IMP, the Internet Messaging Program. > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users > -- Raghavendra G
