Just some experiments with 3.0.2. Using Gluster doc instruction source compiles fine to 32 bit binaries/libraries (64 bit x86 server). Performance issues when Server is 64 bit x86 osol-0906 /ZFS fs and single gigabit e1000 nics. 1 server. + 1 Linux client works at wire speed (> 100Mbytes/s). Good. 1 server + 2 Linux clients or more the performance drops to near zero (20Mbytes/s). Bad. Raw disk speed on server is about 500Mbyte/s on local disk. Using network mode iozone . I notice that using 2 clients the network bandwidth of each client struggles at about 10Mbytes/s. With a single client is it as expected (112 Mbytes/s). Anyone had experience with this ? Possibly a question for OSOL people ? Nick This e-mail message may contain confidential and/or privileged information. If you are not an addressee or otherwise authorized to receive this message, you should not use, copy, disclose or take any action based on this e-mail or any information contained in the message. If you have received this material in error, please advise the sender immediately by reply e-mail and delete this message. Thank you. Streamline Computing is a trading division of Concurrent Thinking Limited: Registered in England and Wales No: 03913912 Registered Address: The Innovation Centre, Warwick Technology Park, Gallows Hill, Warwick, CV34 6UW, United Kingdom
