Bala, Yes the driver is free software. I have included a link to the Intel download center for the RAID controller software. Thanks for getting this included! http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18570&Pro dId=3146&lang=eng - Jason -----Original Message----- From: Bala.JA [mailto:bala at gluster.com] Sent: Sunday, February 07, 2010 10:08 PM To: Jason Adams Cc: gluster-users at gluster.org Subject: Re: Installing the Storage Platform Hi Jason, Is the driver free software? If yes, I would like to get drive source to integrate it into Platform in upcoming release. Thanks, Regards, Bala Jason Adams wrote: > Hello All, > > > > I just downloaded the Gluster 3.0 Storage Platform and I'm trying to > install it on an Intel-based Server board (S3420GPLC) that uses the > built-in raid controller. When installing CentOS 5.4 I have to add a > command to the boot line (dd noprobe=ata1 for each drive) and then it > prompts to load a new driver at which point I use the driver disk I've > created. > > > > How do I get the downloaded ISO for the storage platform to use this > driver? Right now it doesn't recognize the RAID arrays, just the > physical drives. > > > > Any help is appreciated.. > > > > Thanks, > > > > > > Jason Adams > Clearcase Technology, Inc. > (e) jadams at clearcasetechnology.com > <mailto:jadams at clearcasetechnology.com> > (t) 614-827-1275 ext 102 > (f) 614-827-0475 > (w) www.clearcasetechnology.com <http://www.clearcasetechnology.com> > > > > > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
