Hi, I really need some body help here. I try to make 3 servers, 2 as server, and 1 as a client. I want to use "cluster/unify". But when i try to run, it always tell not connected. But if i comment the "cluster/unify" configuration it come to connected. Is there a way to make the glusterfs only able to unify all resources storage from other server in one pool data server only ? Let me shared my configuration here ; Server 1 Configuration (glusterfsd.vol) [root at fs-lb1 glusterfs]# cat glusterfsd.vol --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- volume brick type storage/posix option directory /data end-volume volume server type protocol/server option transport-type tcp option transport.socket.bind-address 192.168.0.10 # Default is to listen on all interfaces option transport.socket.listen-port 6996 # Default is 6996 option client-volume-filename /etc/glusterfs/glusterfs-client.vol subvolumes brick option auth.addr.brick.allow 192.168.0.* # Allow access to "brick" volume end-volume volume brick-ns type storage/posix # POSIX FS translator option directory /data/export-ns # Export this directory end-volume volume servers type protocol/server option transport-type tcp # For TCP/IP transport option transport.socket.listen-port 6999 # Default is 6996 subvolumes brick-ns option auth.addr.brick-ns.allow * # access to "brick" volume end-volume --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Server 2 Configuration (glusterfsd.vol) [root at fs1 glusterfs]# cat glusterfsd.vol --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- volume brick2 type storage/posix # POSIX FS translator option directory /Data # Export this directory end-volume volume server type protocol/server option transport-type tcp option transport.socket.bind-address 192.168.0.11 # Default is to listen on all interfaces option transport.socket.listen-port 6996 # Default is 6996 subvolumes brick2 option auth.addr.brick2.allow * # Allow access to "brick" volume end-volume --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Client Configuration (glusterfs.vol); [root at appman glusterfs]# cat glusterfs.vol --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- volume client type protocol/client option transport-type tcp option remote-host 192.168.0.10 # IP address of the remote brick option remote-subvolume brick # name of the remote volume end-volume volume client2 type protocol/client option transport-type tcp option remote-host 192.168.0.11 option remote-subvolume brick2 end-volume volume client-ns type protocol/client option transport-type tcp # for TCP/IP transport option remote-host 192.168.0.10 # IP address of the remote brick option transport.socket.remote-port 6999 # default server port is 6996 option remote-subvolume brick-ns # name of the remote volume end-volume volume unify type cluster/unify # option scheduler rr option self-heal background # foreground off # default is foreground option scheduler alu option alu.limits.min-free-disk 5% #% option alu.limits.max-open-files 10000 option alu.order disk-usage:read-usage:write-usage:open-files-usage:disk-speed-usage option alu.disk-usage.entry-threshold 2GB option alu.disk-usage.exit-threshold 128MB option alu.open-files-usage.entry-threshold 1024 option alu.open-files-usage.exit-threshold 32 option alu.read-usage.entry-threshold 20 #% option alu.read-usage.exit-threshold 4 #% option alu.write-usage.entry-threshold 20 #% option alu.write-usage.exit-threshold 4 #% option alu.disk-speed-usage.entry-threshold 0 # DO NOT SET IT. SPEED IS CONSTANT!!!. option alu.disk-speed-usage.exit-threshold 0 # DO NOT SET IT. SPEED IS CONSTANT!!!. option alu.stat-refresh.interval 10sec option alu.stat-refresh.num-file-create 10 option namespace client-ns subvolumes client client2 end-volume --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- I try to run with debug mode, i get the ouput here ( I don't know how to understand the output here) ; +------------------------------------------------------------------------------+ [2010-08-09 14:31:07] D [glusterfsd.c:1382:main] glusterfs: running in pid 25827 [2010-08-09 14:31:07] D [unify.c:4347:init] unify: namespace node specified as client-ns [2010-08-09 14:31:07] D [scheduler.c:53:get_scheduler] scheduler: attempt to load file alu.so [2010-08-09 14:31:07] W [xlator.c:656:validate_xlator_volume_options] unify: option 'alu.stat-refresh.interval' is deprecated, preferred is 'scheduler.refresh-interval', continuing with correction [2010-08-09 14:31:07] D [xlator.c:554:_volume_option_value_validate] unify: no range check required for 'option scheduler.refresh-interval 10sec' [2010-08-09 14:31:07] W [xlator.c:656:validate_xlator_volume_options] unify: option 'alu.write-usage.exit-threshold' is deprecated, preferred is 'scheduler.alu.write-usage.exit-threshold', continuing with correction [2010-08-09 14:31:07] D [xlator.c:317:_volume_option_value_validate] unify: no range check required for 'option scheduler.alu.write-usage.exit-threshold 4' [2010-08-09 14:31:07] W [xlator.c:656:validate_xlator_volume_options] unify: option 'alu.write-usage.entry-threshold' is deprecated, preferred is 'scheduler.alu.write-usage.entry-threshold', continuing with correction [2010-08-09 14:31:07] D [xlator.c:317:_volume_option_value_validate] unify: no range check required for 'option scheduler.alu.write-usage.entry-threshold 20' [2010-08-09 14:31:07] W [xlator.c:656:validate_xlator_volume_options] unify: option 'alu.read-usage.exit-threshold' is deprecated, preferred is 'scheduler.alu.read-usage.exit-threshold', continuing with correction [2010-08-09 14:31:07] D [xlator.c:317:_volume_option_value_validate] unify: no range check required for 'option scheduler.alu.read-usage.exit-threshold 4' [2010-08-09 14:31:07] W [xlator.c:656:validate_xlator_volume_options] unify: option 'alu.read-usage.entry-threshold' is deprecated, preferred is 'scheduler.alu.read-usage.entry-threshold', continuing with correction [2010-08-09 14:31:07] D [xlator.c:317:_volume_option_value_validate] unify: no range check required for 'option scheduler.alu.read-usage.entry-threshold 20' [2010-08-09 14:31:07] W [xlator.c:656:validate_xlator_volume_options] unify: option 'alu.open-files-usage.exit-threshold' is deprecated, preferred is 'scheduler.alu.open-files-usage.exit-threshold', continuing with correction [2010-08-09 14:31:07] D [xlator.c:285:_volume_option_value_validate] unify: no range check required for 'option scheduler.alu.open-files-usage.exit-threshold 32' [2010-08-09 14:31:07] W [xlator.c:656:validate_xlator_volume_options] unify: option 'alu.open-files-usage.entry-threshold' is deprecated, preferred is 'scheduler.alu.open-files-usage.entry-threshold', continuing with correction [2010-08-09 14:31:07] D [xlator.c:285:_volume_option_value_validate] unify: no range check required for 'option scheduler.alu.open-files-usage.entry-threshold 1024' [2010-08-09 14:31:07] W [xlator.c:656:validate_xlator_volume_options] unify: option 'alu.disk-usage.exit-threshold' is deprecated, preferred is 'scheduler.alu.disk-usage.exit-threshold', continuing with correction [2010-08-09 14:31:07] D [xlator.c:317:_volume_option_value_validate] unify: no range check required for 'option scheduler.alu.disk-usage.exit-threshold 128MB' [2010-08-09 14:31:07] W [xlator.c:656:validate_xlator_volume_options] unify: option 'alu.disk-usage.entry-threshold' is deprecated, preferred is 'scheduler.alu.disk-usage.entry-threshold', continuing with correction [2010-08-09 14:31:07] D [xlator.c:317:_volume_option_value_validate] unify: no range check required for 'option scheduler.alu.disk-usage.entry-threshold 2GB' [2010-08-09 14:31:07] W [xlator.c:656:validate_xlator_volume_options] unify: option 'alu.order' is deprecated, preferred is 'scheduler.alu.order', continuing with correction [2010-08-09 14:31:07] W [xlator.c:656:validate_xlator_volume_options] unify: option 'alu.limits.min-free-disk' is deprecated, preferred is 'scheduler.limits.min-free-disk', continuing with correction [2010-08-09 14:31:07] D [unify.c:4379:init] unify: Child node count is 2 [2010-08-09 14:31:07] D [alu.c:145:alu_parse_options] alu: alu_init: order string: disk-usage [2010-08-09 14:31:07] D [alu.c:197:alu_parse_options] alu: alu_init: = 2147483648,134217728 [2010-08-09 14:31:07] D [alu.c:145:alu_parse_options] alu: alu_init: order string: read-usage [2010-08-09 14:31:07] D [alu.c:309:alu_parse_options] alu: alu_init: = 20,4 [2010-08-09 14:31:07] D [alu.c:145:alu_parse_options] alu: alu_init: order string: write-usage [2010-08-09 14:31:07] D [alu.c:250:alu_parse_options] unify: alu_init: = 20,4 [2010-08-09 14:31:07] D [alu.c:145:alu_parse_options] alu: alu_init: order string: open-files-usage [2010-08-09 14:31:07] D [alu.c:370:alu_parse_options] alu: alu.c->alu_init: = 1024,32 [2010-08-09 14:31:07] D [alu.c:145:alu_parse_options] alu: alu_init: order string: disk-speed-usage [2010-08-09 14:31:07] D [alu.c:466:alu_init] alu: alu.limit.min-disk-free = 5 pending frames: patchset: v3.0.4 signal received: 11 time of crash: 2010-08-09 14:31:07 configuration details: argp 1 backtrace 1 dlfcn 1 fdatasync 1 libpthread 1 llistxattr 1 setfsid 1 spinlock 1 epoll.h 1 xattr.h 1 st_atim.tv_nsec 1 package-string: glusterfs 3.0.4 /lib64/libc.so.6[0x33016302d0] /usr/lib64/glusterfs/3.0.4/xlator/protocol/client.so(notify+0x228)[0x2b4c1e1ce6d8] /usr/lib64/libglusterfs.so.0(xlator_notify+0x43)[0x2b4c1d7183e3] /usr/lib64/glusterfs/3.0.4/xlator/cluster/unify.so(init+0x2e8)[0x2b4c1e3e7718] /usr/lib64/libglusterfs.so.0(xlator_init+0x2b)[0x2b4c1d71821b] /usr/lib64/libglusterfs.so.0(xlator_tree_init+0x69)[0x2b4c1d7182a9] glusterfs(glusterfs_graph_init+0xc0)[0x403390] glusterfs(main+0x9c1)[0x404211] /lib64/libc.so.6(__libc_start_main+0xf4)[0x330161d994] glusterfs[0x402749] --------- Segmentation fault (core dumped) --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- And if I looking to the log files on the client, here is the output ; --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- [root at appman glusterfs]# tail /var/log/glusterfs/glusterfs.log /usr/lib64/glusterfs/3.0.4/xlator/cluster/unify.so(init+0x2e8)[0x2ab98f215718] /usr/lib64/libglusterfs.so.0(xlator_init+0x2b)[0x2ab98e54621b] /usr/lib64/libglusterfs.so.0(xlator_tree_init+0x69)[0x2ab98e5462a9] glusterfs(glusterfs_graph_init+0xc0)[0x403390] glusterfs(main+0x9c1)[0x404211] /lib64/libc.so.6(__libc_start_main+0xf4)[0x330161d994] glusterfs[0x402749] --------- [2010-08-09 14:28:13] E [glusterfsd.c:202:gf_daemon] glusterfs: end of file- Inappropriate ioctl for device [2010-08-09 14:28:13] E [glusterfsd.c:1314:main] glusterfs: unable to run in daemon mode: Inappropriate ioctl for device [root at appman glusterfs]# tail /var/log/glusterfs/glusterfs.log /usr/lib64/glusterfs/3.0.4/xlator/cluster/unify.so(init+0x2e8)[0x2ab98f215718] /usr/lib64/libglusterfs.so.0(xlator_init+0x2b)[0x2ab98e54621b] /usr/lib64/libglusterfs.so.0(xlator_tree_init+0x69)[0x2ab98e5462a9] glusterfs(glusterfs_graph_init+0xc0)[0x403390] glusterfs(main+0x9c1)[0x404211] /lib64/libc.so.6(__libc_start_main+0xf4)[0x330161d994] glusterfs[0x402749] --------- [2010-08-09 14:28:13] E [glusterfsd.c:202:gf_daemon] glusterfs: end of file- Inappropriate ioctl for device [2010-08-09 14:28:13] E [glusterfsd.c:1314:main] glusterfs: unable to run in daemon mode: Inappropriate ioctl for device --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- And here is the same logs output between Server1 and Server2 Logs ; --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- root at fs-lb1 glusterfs]# tail /var/log/glusterfs/glusterfsd.log 21: volume servers 22: type protocol/server 23: option transport-type tcp # For TCP/IP transport 24: option transport.socket.listen-port 6999 # Default is 6996 25: subvolumes brick-ns 26: option auth.addr.brick-ns.allow * # access to "brick" volume 27: end-volume +------------------------------------------------------------------------------+ [2010-08-08 21:27:09] N [glusterfsd.c:1408:main] glusterfs: Successfully started --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Please help me out how to do the unify the storage to be a pool storage. Please correct my configuration. Is there a mistake on that ? First of all, thank you very much for your kindly response. Regards, Christeddy
