Is there way to solve this issue? Maris Ruskulis wrote: > I have same issue with same config when both nodes are x64. But > difference is that, there is no bailout messages in logs. > > Jasper van Wanrooy - Chatventure wrote: >> Hi Maris, >> >> I regret to hear that. I was also having problems with the stability >> on 32bit platforms. Possibly you should try it on a 64bit platform. >> Is that an option? >> >> Best Regards Jasper >> >> >> On 28 mei 2009, at 09:36, Maris Ruskulis wrote: >> >>> Hello! >>> After upgrade to version 2.0, now using 2.0.1, I'm experiencing >>> problems with glusterfs stability. >>> I'm running 2 node setup with cliet side afr, and glusterfsd also is >>> running on same servers. Time to time glusterfs just hangs, i can >>> reproduce this running iozone benchmarking tool. I'm using patched >>> Fuse, but same result is with unpatched. >>> >>> ================================================================================ >>> Version : glusterfs 2.0.1 built on May 27 2009 16:04:01 >>> TLA Revision : 5c1d9108c1529a1155963cb1911f8870a674ab5b >>> Starting Time: 2009-05-27 16:38:20 >>> Command line : /usr/sbin/glusterfsd >>> --volfile=/etc/glusterfs/glusterfs-server.vol >>> --pid-file=/var/run/glusterfsd.pid --log-file=/var/log/glusterfsd.log >>> PID : 31971 >>> System name : Linux >>> Nodename : weeber.st-inst.lv >>> Kernel Release : 2.6.28-hardened-r7 >>> Hardware Identifier: i686 >>> >>> Given volfile: >>> +------------------------------------------------------------------------------+ >>> 1: # file: /etc/glusterfs/glusterfs-server.vol >>> 2: volume posix >>> 3: type storage/posix >>> 4: option directory /home/export >>> 5: end-volume >>> 6: >>> 7: volume locks >>> 8: type features/locks >>> 9: option mandatory-locks on >>> 10: subvolumes posix >>> 11: end-volume >>> 12: >>> 13: volume brick >>> 14: type performance/io-threads >>> 15: option autoscaling on >>> 16: subvolumes locks >>> 17: end-volume >>> 18: >>> 19: volume server >>> 20: type protocol/server >>> 21: option transport-type tcp >>> 22: option auth.addr.brick.allow 127.0.0.1,192.168.1.* >>> 23: subvolumes brick >>> 24: end-volume >>> >>> +------------------------------------------------------------------------------+ >>> [2009-05-27 16:38:20] N [glusterfsd.c:1152:main] glusterfs: >>> Successfully started >>> [2009-05-27 16:38:33] N [server-protocol.c:7035:mop_setvolume] >>> server: accepted client from 192.168.1.233:1021 >>> [2009-05-27 16:38:33] N [server-protocol.c:7035:mop_setvolume] >>> server: accepted client from 192.168.1.233:1020 >>> [2009-05-27 16:38:46] N [server-protocol.c:7035:mop_setvolume] >>> server: accepted client from 192.168.1.252:1021 >>> [2009-05-27 16:38:46] N [server-protocol.c:7035:mop_setvolume] >>> server: accepted client from 192.168.1.252:1020 >>> >>> ================================================================================ >>> Version : glusterfs 2.0.1 built on May 27 2009 16:04:01 >>> TLA Revision : 5c1d9108c1529a1155963cb1911f8870a674ab5b >>> Starting Time: 2009-05-27 16:38:46 >>> Command line : /usr/sbin/glusterfs -N -f >>> /etc/glusterfs/glusterfs-client.vol /mnt/gluster >>> PID : 32161 >>> System name : Linux >>> Nodename : weeber.st-inst.lv >>> Kernel Release : 2.6.28-hardened-r7 >>> Hardware Identifier: i686 >>> >>> Given volfile: >>> +------------------------------------------------------------------------------+ >>> 1: volume xeon >>> 2: type protocol/client >>> 3: option transport-type tcp >>> 4: option remote-host 192.168.1.233 >>> 5: option remote-subvolume brick >>> 6: end-volume >>> 7: >>> 8: volume weeber >>> 9: type protocol/client >>> 10: option transport-type tcp >>> 11: option remote-host 192.168.1.252 >>> 12: option remote-subvolume brick >>> 13: end-volume >>> 14: >>> 15: volume replicate >>> 16: type cluster/replicate >>> 17: subvolumes xeon weeber >>> 18: end-volume >>> 20: volume readahead >>> 21: type performance/read-ahead >>> 22: option page-size 128kB >>> 23: option page-count 16 >>> 24: option force-atime-update off >>> 25: subvolumes replicate >>> 26: end-volume >>> 27: >>> 28: volume writebehind >>> 29: type performance/write-behind >>> 30: option aggregate-size 1MB >>> 31: option window-size 3MB >>> 32: option flush-behind on >>> 33: option enable-O_SYNC on >>> 34: subvolumes readahead >>> 35: end-volume >>> 36: >>> 37: volume iothreads >>> 38: type performance/io-threads >>> 39: option autoscaling on >>> 40: subvolumes writebehind >>> 41: end-volume >>> 42: >>> 43: >>> 44: >>> 45: #volume bricks >>> 46: #type cluster/distribute >>> 47: #option lookup-unhashed yes >>> 48: #option min-free-disk 20% >>> 49: # subvolumes weeber xeon >>> 50: #end-volume >>> >>> +------------------------------------------------------------------------------+ >>> [2009-05-27 16:38:46] W >>> [xlator.c:555:validate_xlator_volume_options] writebehind: option >>> 'window-size' is deprecated, preferred is 'cache-size', continuing >>> with correction >>> [2009-05-27 16:38:46] W [glusterfsd.c:455:_log_if_option_is_invalid] >>> writebehind: option 'aggregate-size' is not recognized >>> [2009-05-27 16:38:46] W [glusterfsd.c:455:_log_if_option_is_invalid] >>> readahead: option 'page-size' is not recognized >>> [2009-05-27 16:38:46] N [glusterfsd.c:1152:main] glusterfs: >>> Successfully started >>> [2009-05-27 16:38:46] N >>> [client-protocol.c:5557:client_setvolume_cbk] xeon: Connected to >>> 192.168.1.233:6996, attached to remote volume 'brick'. >>> [2009-05-27 16:38:46] N [afr.c:2190:notify] replicate: Subvolume >>> 'xeon' came back up; going online. >>> [2009-05-27 16:38:46] N >>> [client-protocol.c:5557:client_setvolume_cbk] xeon: Connected to >>> 192.168.1.233:6996, attached to remote volume 'brick'. >>> [2009-05-27 16:38:46] N [afr.c:2190:notify] replicate: Subvolume >>> 'xeon' came back up; going online. >>> [2009-05-27 16:38:46] N >>> [client-protocol.c:5557:client_setvolume_cbk] weeber: Connected to >>> 192.168.1.252:6996, attached to remote volume 'brick'. >>> [2009-05-27 18:46:02] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-27 18:16:01. >>> frame-timeout = 1800 >>> [2009-05-27 19:16:09] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-27 18:46:02. >>> frame-timeout = 1800 >>> [2009-05-27 19:46:18] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame OPEN(12) frame sent = 2009-05-27 19:16:09. >>> frame-timeout = 1800 >>> [2009-05-27 20:16:25] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-27 19:46:18. >>> frame-timeout = 1800 >>> [2009-05-27 20:46:34] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-27 20:16:25. >>> frame-timeout = 1800 >>> [2009-05-27 21:16:41] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame OPEN(12) frame sent = 2009-05-27 20:46:34. >>> frame-timeout = 1800 >>> [2009-05-27 21:47:00] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-27 21:16:53. >>> frame-timeout = 1800 >>> [2009-05-27 22:17:07] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-27 21:47:00. >>> frame-timeout = 1800 >>> [2009-05-27 22:47:15] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame OPENDIR(21) frame sent = 2009-05-27 22:17:07. >>> frame-timeout = 1800 >>> [2009-05-27 23:17:23] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-27 22:47:15. >>> frame-timeout = 1800 >>> [2009-05-27 23:47:31] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame OPEN(12) frame sent = 2009-05-27 23:17:23. >>> frame-timeout = 1800 >>> [2009-05-28 00:17:39] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-27 23:47:32. >>> frame-timeout = 1800 >>> [2009-05-28 00:47:47] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-28 00:17:39. >>> frame-timeout = 1800 >>> [2009-05-28 01:17:55] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame OPENDIR(21) frame sent = 2009-05-28 00:47:47. >>> frame-timeout = 1800 >>> [2009-05-28 01:48:03] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-28 01:17:55. >>> frame-timeout = 1800 >>> [2009-05-28 02:18:11] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame OPEN(12) frame sent = 2009-05-28 01:48:03. >>> frame-timeout = 1800 >>> [2009-05-28 02:48:29] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-28 02:18:24. >>> frame-timeout = 1800 >>> [2009-05-28 03:18:37] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-28 02:48:29. >>> frame-timeout = 1800 >>> [2009-05-28 03:48:45] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-28 03:18:37. >>> frame-timeout = 1800 >>> [2009-05-28 04:18:53] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame XATTROP(40) frame sent = 2009-05-28 03:48:45. >>> frame-timeout = 1800 >>> [2009-05-28 04:49:01] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-28 04:18:53. >>> frame-timeout = 1800 >>> [2009-05-28 05:19:09] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame OPENDIR(21) frame sent = 2009-05-28 04:49:01. >>> frame-timeout = 1800 >>> [2009-05-28 05:49:17] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-28 05:19:09. >>> frame-timeout = 1800 >>> [2009-05-28 06:19:25] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-28 05:49:17. >>> frame-timeout = 1800 >>> [2009-05-28 06:49:33] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame XATTROP(40) frame sent = 2009-05-28 06:19:25. >>> frame-timeout = 1800 >>> [2009-05-28 07:19:40] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-28 06:49:33. >>> frame-timeout = 1800 >>> [2009-05-28 07:49:48] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-28 07:19:40. >>> frame-timeout = 1800 >>> [2009-05-28 08:19:56] E [client-protocol.c:292:call_bail] weeber: >>> bailing out frame LOOKUP(32) frame sent = 2009-05-28 07:49:48. >>> frame-timeout = 1800 >>> >>> <maris.vcf>_______________________________________________ >>> Gluster-users mailing list >>> Gluster-users at gluster.org <mailto:Gluster-users at gluster.org> >>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users >> > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://zresearch.com/pipermail/gluster-users/attachments/20090529/6d6e0c3e/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: maris.vcf Type: text/x-vcard Size: 206 bytes Desc: not available URL: <http://zresearch.com/pipermail/gluster-users/attachments/20090529/6d6e0c3e/attachment-0001.vcf>
