Sorry, this was my fault. I forgot about the OpenSMD :/ Am 12.05.2009 um 17:30 schrieb Scandic: > Hi people, > I'm getting in trouble with my first IB setup. The glusterfsd.log > contains the following information. Any hint where to start? > It's a 2-Node System connected to a 8-Port IB Switch. Linux is > CentOS 5.3 x86_64. Mellanox Drivers are installed. > > = > = > = > = > = > = > = > = > = > = > ====================================================================== > Version : glusterfs 2.0.0 built on Apr 24 2009 19:27:41 > TLA Revision : 7b2e459db65edd302aa12476bc73b3b7a17b1410 > Starting Time: 2009-05-13 01:22:03 > Command line : /usr/sbin/glusterfsd -f /etc/glusterfs/glusterfsd.vol > PID : 15237 > System name : Linux > Nodename : Node1 > Kernel Release : 2.6.18-128.el5 > Hardware Identifier: x86_64 > > Given volfile: > + > ------------------------------------------------------------------------------+ > 1: volume posix > 2: type storage/posix > 3: option directory /home/export > 4: end-volume > 5: > 6: volume locks > 7: type features/locks > 8: subvolumes posix > 9: end-volume > 10: > 11: volume brick > 12: type performance/io-threads > 13: option autoscaling yes > 14: subvolumes locks > 15: end-volume > 16: > 17: volume server > 18: type protocol/server > 19: option transport-type ib-verbs > 20: #option transport.ib-verbs.listen-port 6990 > 21: option auth.addr.brick.allow * > 22: subvolumes brick > 23: end-volume > 24: > 25: volume Node1 > 26: type protocol/client > 27: option transport-type ib-verbs > 28: #option remote-port 6990 > 29: option remote-host Node1 > 30: option remote-subvolume brick > 31: end-volume > 32: > 33: volume Node2 > 34: type protocol/client > 35: option transport-type ib-verbs > 36: #option remote-port 6990 > 37: option remote-host Node2 > 38: option remote-subvolume brick > 39: end-volume > 40: > 41: volume nufa > 42: type cluster/nufa > 43: option local-volume-name Node1 > 44: subvolumes Node1 Node2 > 45: end-volume > 46: > 47: volume writebehind > 48: type performance/write-behind > 49: option page-size 128KB > 50: option cache-size 1MB > 51: subvolumes nufa > 52: end-volume > 53: > 54: volume cache > 55: type performance/io-cache > 56: option cache-size 512MB > 57: subvolumes writebehind > 58: end-volume > 59: > > + > ------------------------------------------------------------------------------+ > > 2009-05-13 01:22:03 W [io-cache.c:1342:init] cache: dangling volume. > check volfile > 2009-05-13 01:22:03 N [glusterfsd.c:1152:main] glusterfs: > Successfully started > 2009-05-13 01:22:04 E [ib-verbs.c: > 1226:ib_verbs_send_completion_proc] transport/ib-verbs: send work > request on `mthca0' returned error wc.status = 12, wc.vendor_err = > 129, post->buf = 0x2aaaab6f1000, wc.byte_len = 0, post->reused = 1 > 2009-05-13 01:22:04 E [ib-verbs.c:1996:ib_verbs_event_handler] > transport/ib-verbs: Node2: pollin received on tcp socket (peer: > 192.168.0.192:6997) after handshake is > complete > 2009-05-13 01:22:04 E [ib-verbs.c: > 1226:ib_verbs_send_completion_proc] transport/ib-verbs: send work > request on `mthca0' returned error wc.status = 12, wc.vendor_err = > 129, post->buf = 0x2aaaab6cf000, wc.byte_len = 0, post->reused = 1 > 2009-05-13 01:22:04 E [saved-frames.c:165:saved_frames_unwind] > Node2: forced unwinding frame type(2) op(SETVOLUME) > 2009-05-13 01:22:04 E [client-protocol.c:6267:client_setvolume_cbk] > Node2: setvolume failed (Transport endpoint is not connected) > 2009-05-13 01:22:04 N [client-protocol.c:7014:notify] Node2: > disconnected > > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
