2.0.0rc7 rpmbuild failed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kirby,

     For the time being if you don't require mod_glusterfs you can build
rpms
     without mod_glusterfs by passing the following commands in rpmbuild

     "rpmbuild -ta glusterfs-2.0.0rc7.tar.gz --without modglfs"

     Issue reported by you is not reproducible on our test cluster with
CentOS 5.2
     and apache 2.2.10 version. Can you please state your distribution and
release
     where you are actually trying to build rpms for glusterfs?

Regards
--
Harshavardhana
"Yantra Shilpi"
Z Research Inc - http://www.zresearch.com



On Thu, Mar 26, 2009 at 8:38 AM, Kirby Zhou <kirbyzhou at sohu-rd.com> wrote:

> + /usr/lib/rpm/check-rpaths /usr/lib/rpm/check-buildroot
>
> ****************************************************************************
> ***
> *
> * WARNING: 'check-rpaths' detected a broken RPATH and will cause 'rpmbuild'
> *          to fail. To ignore these errors, you can set the '$QA_RPATHS'
> *          environment variable which is a bitmask allowing the values
> *          below. The current value of QA_RPATHS is 0x0000.
> *
> *    0x0001 ... standard RPATHs (e.g. /usr/lib); such RPATHs are a minor
> *               issue but are introducing redundant searchpaths without
> *               providing a benefit. They can also cause errors in multilib
> *               environments.
> *    0x0002 ... invalid RPATHs; these are RPATHs which are neither absolute
> *               nor relative filenames and can therefore be a SECURITY risk
> *    0x0004 ... insecure RPATHs; these are relative RPATHs which are a
> *               SECURITY risk
> *    0x0008 ... the special '$ORIGIN' RPATHs are appearing after other
> *               RPATHs; this is just a minor issue but usually unwanted
> *    0x0010 ... the RPATH is empty; there is no reason for such RPATHs
> *               and they cause unneeded work while loading libraries
> *    0x0020 ... an RPATH references '..' of an absolute path; this will
> break
> *               the functionality when the path before '..' is a symlink
> *
> *
> * Examples:
> * - to ignore standard and empty RPATHs, execute 'rpmbuild' like
> *   $ QA_RPATHS=$[ 0x0001|0x0010 ] rpmbuild my-package.src.rpm
> * - to check existing files, set $RPM_BUILD_ROOT and execute check-rpaths
> like
> *   $ RPM_BUILD_ROOT=<top-dir> /usr/lib/rpm/check-rpaths
> *
>
> ****************************************************************************
> ***
> ERROR   0002: file
> '/usr/lib64/glusterfs/2.0.0rc7/apache/2.2/mod_glusterfs.so' contains an
> invalid rpath
> '/root/rpmbuild/BUILD/glusterfs-2.0.0rc7/libglusterfsclient/src/.libs' in
> [/root/rpmbuild/BUILD/glusterfs-2.0.0rc7/libglusterfsclient/src/.libs]
> error: Bad exit status from /var/tmp/rpm-tmp.14389 (%install)
>
>
>
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://zresearch.com/pipermail/gluster-users/attachments/20090326/0a50317f/attachment.htm>


[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux