GlusterFS running, but not syncing is done

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi.

Just tried this, server works but the client fails.

Here is the error that the client prints:

2009-03-15 14:21:51 E [glusterfsd.c:551:glusterfs_graph_init] glusterfs: no
valid translator loaded at the top or no mount point given. exiting
2009-03-15 14:21:51 E [glusterfsd.c:1127:main] glusterfs: translator
initialization failed.  exiting


Two possible reasons I can think of:

1) The volume is always home1 on both the servers, while in client file both
home1 and home2 are referenced. Shouldn't the .42 have home2 defined as it's
volume? Or it doesn't matter, as home2 is client-only volume label?

2) The "/media/directory" is a regular directory on disk. Should it be a
mount or something else?

3) I'm using stock kernel without any modifications. Nor I did any changes
to filesystems for extended attributes (using ext3). Would fuse work without
any problems?

Thanks!

2009/3/12 Krishna Srinivas <krishna at zresearch.com>

> server.vol :
> -----
> volume home1
>  type storage/posix                   # POSIX FS translator
>  option directory /media/storage        # Export this directory
> end-volume
>
> volume posix-locks-home1
>  type features/posix-locks
>  option mandatory-locks on
>  subvolumes home1
> end-volume
>
> ### Add network serving capability to above home.
> volume server
>  type protocol/server
>  option transport-type tcp
>  subvolumes posix-locks-home1
>  option auth.addr.posix-locks-home1.allow * # Allow access to "home1"
> volume
> end-volume
>
> ----------
>
> client.vol:
> ---------
>
> ## Reference volume "home1" from remote server
> volume home1
>  type protocol/client
>  option transport-type tcp/client
>  option remote-host 192.168.253.41      # IP address of remote host
>  option remote-subvolume posix-locks-home1     # use home1 on remote host
>  option transport-timeout 10           # value in seconds; it should
> be set relatively low
> end-volume
>
> ## Reference volume "home2" from remote server
> volume home2
>  type protocol/client
>  option transport-type tcp/client
>  option remote-host 192.168.253.42      # IP address of remote host
>  option remote-subvolume posix-locks-home1     # use home1 on remote host
>  option transport-timeout 10           # value in seconds; it should
> be set relatively low
> end-volume
>
> volume home
>  type cluster/afr
>  option metadata-self-heal on
>  subvolumes home1 home2
> end-volume
>
> --------
>
> Make sure the IP addresses are correct.
> You can use the same server.vol and client.vol for both the machines.
> (assuming you have backend directory names same)
>
> Krishna
>
> On Thu, Mar 12, 2009 at 8:28 PM, Stas Oskin <stas.oskin at gmail.com> wrote:
> > Hi.
> >
> > Did you mean to change their order to become something like this?
> >
> > Otherwise can you please just post the correct version? I'm not quite
> > familiar with the syntax, and will appreciate an example I can work and
> > learn from.
> >
> > Thanks!
> >
> >
> > glusterfs.vol (client)
> > ### Create automatic file replication
> > volume home
> >  type cluster/afr
> >  option metadata-self-heal on
> >  option read-subvolume posix-locks-home1
> > #  option favorite-child home2
> >  subvolumes posix-locks-home1 home2
> > end-volume
> > ## Reference volume "home2" from remote server
> > volume home2
> >  type protocol/client
> >  option transport-type tcp/client
> >  option remote-host 192.168.253.41      # IP address of remote host
> >  option remote-subvolume posix-locks-home1     # use home1 on remote host
> >  option transport-timeout 10           # value in seconds; it should be
> set
> > relatively low
> > end-volume
> >
> > glusterfsd.vol (server)
> >
> > ### Add network serving capability to above home.
> > volume server
> >  type protocol/server
> >  option transport-type tcp
> >  subvolumes posix-locks-home1
> >  option auth.addr.posix-locks-home1.allow 192.168.253.41,127.0.0.1 #
> Allow
> > access to "home1" volume
> > end-volume
> > volume posix-locks-home1
> >  type features/posix-locks
> >  option mandatory-locks on
> >  subvolumes home1
> > end-volume
> > volume home1
> >  type storage/posix                   # POSIX FS translator
> >  option directory /media/storage        # Export this directory
> > end-volume
> > Regards.
> >
> > 2009/3/12 Krishna Srinivas <krishna at zresearch.com>
> >>
> >> Hi Stats,
> >> Excuse me for missing out on this mail.
> >>
> >> Your vol files for having 2 servers and 2 clients are incorrect.
> >>
> >> on server vol (both the machines) you need to have:
> >> protocol/server -> features/locks -> storage/posix
> >>
> >> On client vol (both the machines) you need to have:
> >> cluster/afr -> (two protocol/clients)
> >>
> >> each of the protocol/clients connect to each of the servers.
> >>
> >> You would use the client vol to mount the glusterfs.
> >>
> >> Let us know if you still face problems.
> >>
> >> Krishna
> >>
> >> On Tue, Mar 10, 2009 at 1:32 AM, Stas Oskin <stas.oskin at gmail.com>
> wrote:
> >> > Hi.
> >> > The boxes participating in AFR are running OpenVZ host kernels - can
> it
> >> > be
> >> > related in any way to the issue?
> >> > Regards.
> >> >
> >> > 2009/3/9 Stas Oskin <stas.oskin at gmail.com>
> >> >>
> >> >> Hi.
> >> >> These are my new 2 vol files, one for client and one for server.
> >> >> Can you advice if they are correct?
> >> >> Thanks in advance.
> >> >> glusterfs.vol (client)
> >> >> ## Reference volume "home2" from remote server
> >> >> volume home2
> >> >>  type protocol/client
> >> >>  option transport-type tcp/client
> >> >>  option remote-host 192.168.253.41      # IP address of remote host
> >> >>  option remote-subvolume posix-locks-home1     # use home1 on remote
> >> >> host
> >> >>  option transport-timeout 10           # value in seconds; it should
> be
> >> >> set relatively low
> >> >> end-volume
> >> >> ### Create automatic file replication
> >> >> volume home
> >> >>  type cluster/afr
> >> >>  option metadata-self-heal on
> >> >>  option read-subvolume posix-locks-home1
> >> >> #  option favorite-child home2
> >> >>  subvolumes posix-locks-home1 home2
> >> >> end-volume
> >> >>
> >> >> glusterfsd.vol (server)
> >> >>
> >> >> volume home1
> >> >>  type storage/posix                   # POSIX FS translator
> >> >>  option directory /media/storage        # Export this directory
> >> >> end-volume
> >> >> volume posix-locks-home1
> >> >>  type features/posix-locks
> >> >>  option mandatory-locks on
> >> >>  subvolumes home1
> >> >> end-volume
> >> >> ### Add network serving capability to above home.
> >> >> volume server
> >> >>  type protocol/server
> >> >>  option transport-type tcp
> >> >>  subvolumes posix-locks-home1
> >> >>  option auth.addr.posix-locks-home1.allow 192.168.253.41,127.0.0.1 #
> >> >> Allow
> >> >> access to "home1" volume
> >> >> end-volume
> >> >> 2009/3/9 Krishna Srinivas <krishna at zresearch.com>
> >> >>>
> >> >>> Stats,
> >> >>>
> >> >>> I think there was nothing changed between rc2 and rc4 that could
> >> >>> affect this functionality.
> >> >>>
> >> >>> Your vol files look fine, i will look into why it is not working.
> >> >>>
> >> >>> Do not use single process as both server and client as we saw issues
> >> >>> related to locking. Can you see if using different processes for
> >> >>> server and client works fine w.r.t replication?
> >> >>>
> >> >>> Also subvolumes list of all AFRs should be in same order (in your
> case
> >> >>> its interchanged)
> >> >>>
> >> >>> Regards
> >> >>> Krishna
> >> >>>
> >> >>> On Mon, Mar 9, 2009 at 5:44 PM, Stas Oskin <stas.oskin at gmail.com>
> >> >>> wrote:
> >> >>> > Actually, I see a new version came out, rc4.
> >> >>> > Any idea if anything related was fixed?
> >> >>> > Regards.
> >> >>> > 2009/3/9 Stas Oskin <stas.oskin at gmail.com>
> >> >>> >>
> >> >>> >> Hi.
> >> >>> >>>
> >> >>> >>> Was it working for your previously? Any other error logs on
> >> >>> >>> machine
> >> >>> >>> with afr? what version are you using? If it was working
> previously
> >> >>> >>> what changed in your setup recently? Can you paste your vol
> files
> >> >>> >>> (just to be sure)
> >> >>> >>
> >> >>> >>
> >> >>> >> Nope, it actually my first setup in lab. No errors - it just
> seems
> >> >>> >> as
> >> >>> >> not
> >> >>> >> synchronizing anything. The version I'm using is the latest one -
> 2
> >> >>> >> rc2.
> >> >>> >> Perhaps I need to modify anything else in addition to GlusterFS
> >> >>> >> installation - like file-systems attributes or something?
> >> >>> >> The approach I'm using is the one that was recommended by Kieth
> >> >>> >> over
> >> >>> >> direct emails (Keith, hope you don't mind me posting them :) ).
> >> >>> >> The idea is basically to have single vol file both for client and
> >> >>> >> for
> >> >>> >> server, and to have one glusterfs process doing the job both as
> >> >>> >> client
> >> >>> >> and
> >> >>> >> as server.
> >> >>> >> Thanks for the help.
> >> >>> >> Server 1:
> >> >>> >> volume home1
> >> >>> >>  type storage/posix                   # POSIX FS translator
> >> >>> >>  option directory /media/storage        # Export this directory
> >> >>> >> end-volume
> >> >>> >>
> >> >>> >> volume posix-locks-home1
> >> >>> >>  type features/posix-locks
> >> >>> >>  option mandatory-locks on
> >> >>> >>  subvolumes home1
> >> >>> >> end-volume
> >> >>> >>
> >> >>> >> ## Reference volume "home2" from remote server
> >> >>> >> volume home2
> >> >>> >>  type protocol/client
> >> >>> >>  option transport-type tcp/client
> >> >>> >>  option remote-host 192.168.253.42      # IP address of remote
> host
> >> >>> >>  option remote-subvolume posix-locks-home1     # use home1 on
> >> >>> >> remote
> >> >>> >> host
> >> >>> >>  option transport-timeout 10           # value in seconds; it
> >> >>> >> should
> >> >>> >> be
> >> >>> >> set relatively low
> >> >>> >> end-volume
> >> >>> >>
> >> >>> >> ### Add network serving capability to above home.
> >> >>> >> volume server
> >> >>> >>  type protocol/server
> >> >>> >>  option transport-type tcp
> >> >>> >>  subvolumes posix-locks-home1
> >> >>> >>  option auth.addr.posix-locks-home1.allow
> 192.168.253.42,127.0.0.1
> >> >>> >> #
> >> >>> >> Allow
> >> >>> >> access to "home1" volume
> >> >>> >> end-volume
> >> >>> >>
> >> >>> >> ### Create automatic file replication
> >> >>> >> volume home
> >> >>> >>  type cluster/afr
> >> >>> >>  option metadata-self-heal on
> >> >>> >>  option read-subvolume posix-locks-home1
> >> >>> >> #  option favorite-child home2
> >> >>> >>  subvolumes home2 posix-locks-home1
> >> >>> >> end-volume
> >> >>> >>
> >> >>> >>
> >> >>> >> Server 2:
> >> >>> >>
> >> >>> >> volume home1
> >> >>> >>  type storage/posix                   # POSIX FS translator
> >> >>> >>  option directory /media/storage        # Export this directory
> >> >>> >> end-volume
> >> >>> >>
> >> >>> >> volume posix-locks-home1
> >> >>> >>  type features/posix-locks
> >> >>> >>  option mandatory-locks on
> >> >>> >>  subvolumes home1
> >> >>> >> end-volume
> >> >>> >>
> >> >>> >> ## Reference volume "home2" from remote server
> >> >>> >> volume home2
> >> >>> >>  type protocol/client
> >> >>> >>  option transport-type tcp/client
> >> >>> >>  option remote-host 192.168.253.41      # IP address of remote
> host
> >> >>> >>  option remote-subvolume posix-locks-home1     # use home1 on
> >> >>> >> remote
> >> >>> >> host
> >> >>> >>  option transport-timeout 10           # value in seconds; it
> >> >>> >> should
> >> >>> >> be
> >> >>> >> set relatively low
> >> >>> >> end-volume
> >> >>> >>
> >> >>> >> ### Add network serving capability to above home.
> >> >>> >> volume server
> >> >>> >>  type protocol/server
> >> >>> >>  option transport-type tcp
> >> >>> >>  subvolumes posix-locks-home1
> >> >>> >>  option auth.addr.posix-locks-home1.allow
> 192.168.253.41,127.0.0.1
> >> >>> >> #
> >> >>> >> Allow
> >> >>> >> access to "home1" volume
> >> >>> >> end-volume
> >> >>> >>
> >> >>> >> ### Create automatic file replication
> >> >>> >> volume home
> >> >>> >>  type cluster/afr
> >> >>> >>  option metadata-self-heal on
> >> >>> >>  option read-subvolume posix-locks-home1
> >> >>> >> #  option favorite-child home2
> >> >>> >>  subvolumes home2 posix-locks-home1
> >> >>> >> end-volume
> >> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://zresearch.com/pipermail/gluster-users/attachments/20090315/22f99901/attachment-0001.htm>


[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux