Hiren Joshi wrote: > > >> -----Original Message----- >> From: Vikas Gorur [mailto:vikas at gluster.com] >> Sent: 11 August 2009 15:34 >> To: Hiren Joshi >> Cc: gluster-users at gluster.org >> Subject: Re: Fuse problem >> >> >> ----- "Hiren Joshi" <josh at moonfruit.com> wrote: >> >>> Hello all, >>> >>> I'm running a 64bit Centos5 setup and am trying to mount a gluster >>> filesystem (which is exported out of the same box). >>> >>> glusterfs --debug --volfile=/root/gluster/webspace2.vol >>> /home/webspace_glust/ >>> >>> Gives me: >>> <snip> >>> [2009-08-11 16:26:37] D [client-protocol.c:5963:init] glust1b_36: >>> defaulting ping-timeout to 10 >>> [2009-08-11 16:26:37] D [transport.c:141:transport_load] transport: >>> attempt to load file /usr/lib64/glusterfs/2.0.4/transport/socket.so >>> [2009-08-11 16:26:37] D [transport.c:141:transport_load] transport: >>> attempt to load file /usr/lib64/glusterfs/2.0.4/transport/socket.so >>> fuse: device not found, try 'modprobe fuse' first >> Make sure you have the fuse module loaded (modprobe fuse). >> > > I have fuse.x86_64 2.7.4-1.el5.rf installed but: > #> modprobe fuse > FATAL: Module fuse not found. > > >> Vikas >> -- >> Engineer - http://gluster.com/ >> >> That is the userland part of fuse. There is also a kernel module that you will need to get and install. I'm guessing you have yum since this appears to be a RHEL 5 machine so try a 'yum search fuse' to see if you can find the name of the kernel module. It escapes me at the moment, which is why I suggest the yum search. -- Jason
