Dear Team, I have installed and configured gluster in one server and client. one time it was worked fine, again later it is not working. my configuration files. server [root at rhel2 ~]# cat /etc/glusterfs/glusterfs-server.vol volume rhel2 type storage/posix # POSIX FS translator option directory /opt # Export this directory end-volume volume rhel2 type protocol/server option transport-type tcp/server # For TCP/IP transport option client-volume-filename /etc/glusterfs/glusterfs-client.vol subvolumes export test option auth.ip.rhel2.allow * # Allow access to "brick" volume end-volume [root at rhel2 ~]# client [root at test ~]# cat /etc/glusterfs/glusterfs-client.vol volume rhel2 type protocol/client option transport-type tcp/client option remote-host 10.129.150.227 option remote-subvolume rhel2 end-volume [root at test ~]# problem: [root at test ~]# glusterfs --server 10.129.150.227 /mnt/glusterfs/ --volume-name r hel2 glusterfs: could not open specfile [root at test ~]# Apart from these i have few doubts, 1)In our website it told that gluster there is no single point of failure. But as per configuration point of view it is like server and client model so if server fails client cannot able to mount. 2)In server how can i confirm whether server was exported or not where as in NFS we have command to check showmount. kindly inform me If iam doing wrong, it will help full for me to go further checks. Thanks and Regards G.Rajasekhar, System Engineer. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://zresearch.com/pipermail/gluster-users/attachments/20080627/3c88ea15/attachment.htm