Its mostly the PATH issue. try adding '/usr/local/lib' in /etc/ld.so.conf, and run ldconfig. It should work fine. (make sure you build GlusterFS again with proper libfuse.so, which should be detected after running ldconfig). Or you can choose to give 'LDFLAGS=-L/usr/local/lib' (or is it '-L/usr/local/lib64') for make. Regards, Amar 2008/6/24 Andrew Burkett <burkett.andrew at gmail.com>: > I'm trying to get gluster going on the system mentioned in the title and > I'm have two issues. The fuse mod compiles and installs just fine, or so it > says. But when I run configure for glusterfs the summary at the end says > that its not configuring for FUSE client support. Both the stock kernel > fuse and the modded one are on the computer, but its not recognizing them. > > Also ignoring the client capabilities, when I run the glusterfsd to set up > a server, I get the following message with nothing being dumped into the log > file even will DEBUG loglevel set: > "error while loading shared libraries: libglusterfs.so.0 cannot open shared > object file: No such file or directory" > > My guess is both of the issues are related to gluster looking in the wrong > place for the files. Is there any flag that I can use for configure or make > that can fix this issue? > > I'm using the commands shown in the installation tutorial, which worked for > a 32 bit Suse 10.1 system, so its probably somehow related to the system > being 64 bit. > > Thank you for any help > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > -- Amar Tumballi Gluster/GlusterFS Hacker [bulde on #gluster/irc.gnu.org] http://www.zresearch.com - Commoditizing Super Storage! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://zresearch.com/pipermail/gluster-users/attachments/20080624/d96564c8/attachment.htm
