Martin, Please configure glusterfs build with '--enable-fuse-client'. You need to have fuse installed. -- gowda On Thu, Nov 6, 2008 at 7:18 PM, Martin Gumbau <mgumbau at iciq.es> wrote: > Hi, > I don't obtain succesfully results to reexport NFS from Glusterfs. > With fuse kernel module that was in SuSE SLES 10 SP2 distribution the > glusterfs client mount ok. > > I read README.NFS (from fuse-2.7.4 or fuse -2.7.3 or fuse-2.7.3glfs10) > as Avati said to me. Then I compile the fuse module with > --enable-kernel-module option (previus make clean). > > The kernel 2.6.16.60-0.21-smp .config option > CONFIG_FUSE_FS=m > > These are my files: > NFSSERVER - exports > > /mnt/glusterfs *(no_subtree_check,async,no_auth_nlm,no_acl,rw,fsid=10) > > GLUSTERFS - command line: > > glusterfs --disable-io-mode=none -l/var/log/glusterfs/gfscli.log -LDEBUG > -f /etc/glusterfs/glusterfs-client.vol /mnt/glusterfs > > LOGFILE - gfscli.log > > 2008-11-06 14:24:59 D [glusterfs.c:167:get_spec_fp] glusterfs: loading > spec from /etc/glusterfs/glusterfs-client.vol > 2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for > 'sirius00' > 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to > load file /usr/local/lib/glusterfs/1.3.12/xlator/protocol/client.so > 2008-11-06 14:24:59 D [spec.y:127:section_type] parser: > Type:sirius00:protocol/client > 2008-11-06 14:24:59 D [spec.y:141:section_option] parser: > Option:sirius00:transport-type:tcp/client > 2008-11-06 14:24:59 D [spec.y:141:section_option] parser: > Option:sirius00:remote-host:10.3.1.200 > 2008-11-06 14:24:59 D [spec.y:141:section_option] parser: > Option:sirius00:remote-subvolume:brick > 2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:sirius00 > 2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for > 'sirius01' > 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to > load file /usr/local/lib/glusterfs/1.3.12/xlator/protocol/client.so > 2008-11-06 14:24:59 D [spec.y:127:section_type] parser: > Type:sirius01:protocol/client > 2008-11-06 14:24:59 D [spec.y:141:section_option] parser: > Option:sirius01:transport-type:tcp/client > 2008-11-06 14:24:59 D [spec.y:141:section_option] parser: > Option:sirius01:remote-host:10.3.1.201 > 2008-11-06 14:24:59 D [spec.y:141:section_option] parser: > Option:sirius01:remote-subvolume:brick > 2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:sirius01 > 2008-11-06 14:24:59 D [spec.y:107:new_section] parser: New node for > 'mirror0' > 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to > load file /usr/local/lib/glusterfs/1.3.12/xlator/cluster/afr.so > 2008-11-06 14:24:59 D [spec.y:127:section_type] parser: > Type:mirror0:cluster/afr > 2008-11-06 14:24:59 D [spec.y:196:section_sub] parser: > child:mirror0->sirius00 > 2008-11-06 14:24:59 D [spec.y:196:section_sub] parser: > child:mirror0->sirius01 > 2008-11-06 14:24:59 D [spec.y:209:section_end] parser: end:mirror0 > 2008-11-06 14:24:59 D [glusterfs.c:128:fuse_graph] glusterfs: setting > option mount-point to /mnt/glusterfs > 2008-11-06 14:24:59 D [xlator.c:115:xlator_set_type] xlator: attempt to > load file /usr/local/lib/glusterfs/1.3.12/xlator/mount/fuse.so > 2008-11-06 14:24:59 E [fuse-bridge.c:2699:init] glusterfs-fuse: > fuse_mount failed (No such file or directory) > > 2008-11-06 14:24:59 E [glusterfs.c:547:main] glusterfs: Initializing > FUSE failed > > > > > -- > Martin Gumbau - mgumbau at iciq.es > Responsable Informatic > dels grups teorics > de Quimica Computacional > del ICIQ > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > -- hard work often pays off after time, but laziness always pays off now -------------- next part -------------- An HTML attachment was scrubbed... URL: http://zresearch.com/pipermail/gluster-users/attachments/20081106/168adb3b/attachment.htm
