?############################################################################# ?CLIENT LOG ?############################################################################# --------- 2008-10-27 17:16:48 W [fuse-bridge.c:398:fuse_entry_cbk] glusterfs-fuse: 2: (34) / => 1 Rehashing 0/0 TLA Repo Revision: glusterfs--mainline--2.5--patch-797 Time : 2008-10-27 17:17:06 Signal Number : 11 glusterfs -f /etc/glusterfs/glusterfs-client.vol -l /var/log/glusterfs/glusterfscli.log -L WARNING /m nt/glusterfs/ volume fuse type mount/fuse option direct-io-mode 1 option entry-timeout 1 option attr-timeout 1 option mount-point /mnt/glusterfs/ subvolumes mirror0 end-volume volume mirror0 type cluster/afr subvolumes sirius00 sirius01 end-volume volume sirius01 type protocol/client option remote-subvolume brick option remote-host 10.3.20.201 option transport-type tcp/client end-volume volume sirius00 type protocol/client option remote-subvolume brick option remote-host 10.3.20.200 option transport-type tcp/client end-volume frame : type(1) op(13) [0xffffe420] /usr/local/lib/libfuse.so.2(fuse_session_process+0x26)[0xb75f3166] /usr/local/lib/glusterfs/1.3.12/xlator/mount/fuse.so[0xb7602238] /lib/tls/libpthread.so.0[0xb7f6a0bd] /lib/tls/libc.so.6(__clone+0x5e)[0xb7eff01e] --------- ?############################################################################# ??############################################################################# SERVER LOG ??############################################################################# 008-10-27 12:35:47 E [protocol.c:271:gf_block_unserialize_transport] server: EOF from peer (10.3.1.1:1020) 2008-10-27 12:41:12 E [protocol.c:271:gf_block_unserialize_transport] server: EOF from peer (10.3.1.1:1020) 2008-10-27 12:41:45 E [protocol.c:271:gf_block_unserialize_transport] server: EOF from peer (10.3.1.1:1018) 2008-10-27 12:42:09 E [protocol.c:271:gf_block_unserialize_transport] server: EOF from peer (10.3.1.1:1016) 2008-10-27 15:08:54 E [protocol.c:271:gf_block_unserialize_transport] server: EOF from peer (10.3.1.1:1020) 2008-10-27 15:49:07 E [protocol.c:271:gf_block_unserialize_transport] server: EOF from peer (10.3.20.1:1022) 2008-10-27 16:51:28 E [protocol.c:271:gf_block_unserialize_transport] server: EOF from peer (10.3.20.1:1022) 2008-10-27 16:56:17 E [protocol.c:271:gf_block_unserialize_transport] server: EOF from peer (10.3.20.1:1022) 2008-10-27 17:12:08 E [protocol.c:271:gf_block_unserialize_transport] server: EOF from peer (10.3.20.1:1023) 2008-10-27 17:17:06 E [protocol.c:271:gf_block_unserialize_transport] server: EOF from peer (10.3.20.1:1023) ??############################################################################# On Mon, 2008-10-27 at 15:07 +0100, Anand Avati wrote: > Can you post the client and server logs as well? > > avati > > 2008/10/27 Martin Gumbau <mgumbau at iciq.es> > Hi, > I am the next scenario: > ############################################################################# > SERVER SIDE? (64 bit architecture) > > ?############################################################################# > Two Storage Machines with: > HARDWARE > DELL PE2900 III Intel Quad Core Xeon E5420 2,5Ghz, > 2x6Mb cache, Bus > 1333FSB > RAM 4 GB FB 667Mhz (2x2Gb) > 8 HDD 1 TB, Near Line SAS 3,5" 7,200 Hot plug > Rack format 5U > Raid PER 6i 256 Mb > redundant Power Supply > Network Adapter Dual Intel PRO 1000 PCIe x 4 > CDRW/DVD > > SOFTWARE > * Suse SLES 10 SP2 x86_64 > * Kernel: 2.6.16.60-0.21-smp #1 SMP Tue May 6 12:41:02 > UTC 2008 x86_64 > x86_64 x86_64 GNU/Linux > * glusterfs -V > ************************************************************************** > glusterfs -V > glusterfs 1.3.12 built on Oct 3 2008 12:09:48 > Repository revision: glusterfs--mainline--2.5--patch-797 > Copyright (c) 2006, 2007, 2008 Z RESEARCH Inc. > <http://www.zresearch.com> > GlusterFS comes with ABSOLUTELY NO WARRANTY. > You may redistribute copies of GlusterFS under the terms of > the GNU > General Public License. > ************************************************************************** > * fuse, automake, autoconf, libtool, gcc, flex, bison, > byacc, > kernel-source, ...INSTALLED > * no firewall > * cat /etc/glusterfs/glusterfs-server.vol > ************************************************************************** > # file: /etc/glusterfs/glusterfs-server.vol > volume brick > type storage/posix > option directory /cfs/infi/ > end-volume > > volume server > type protocol/server > option transport-type tcp/server > option auth.ip.brick.allow * > subvolumes brick > end-volume > ?************************************************************************** > > ?############################################################################# > > CLIENT SIDE (32 bit architecture) > ?############################################################################# > Nodes > HARDWARE > * Dell PowerEdge 850 > * RAM 2GB > * MicroP. Intel P4 - 3.6 GHz > * HDD 80 GB > > SOFTWARE > * Operating System - Debian testing/unstable > * Kernel - 2.6.16.20 #5 SMP Tue Jun 20 13:59:51 CEST > 2006 i686 > GNU/Linux > * gluster -V > ??************************************************************************** > glusterfs 1.3.12 built on Oct 22 2008 19:52:44 > Repository revision: glusterfs--mainline--2.5--patch-797 > Copyright (c) 2006, 2007, 2008 Z RESEARCH Inc. > <http://www.zresearch.com> > GlusterFS comes with ABSOLUTELY NO WARRANTY. > You may redistribute copies of GlusterFS under the terms of > the GNU > General Public License. > ??************************************************************************** > * fuse, automake, autoconf, libtool, gcc, flex, bison, > byacc, > kernel-source, ...INSTALLED > * cat /etc/glusterfs/glusterfs-client.vol > > volume sirius00 > type protocol/client > option transport-type tcp/client > option remote-host 10.3.1.200 > option remote-subvolume brick > end-volume > > volume sirius01 > type protocol/client > option transport-type tcp/client > option remote-host 10.3.1.201 > option remote-subvolume brick > end-volume > > volume mirror0 > type cluster/afr > subvolumes sirius00 sirius01 > end-volume > ??############################################################################# > > > When I navigate throught the file structure all is ok but if I > open the > file or create a new file the error 'Transport endpoint is > not > connected' appear and connection to servers fail. > > > -- > Martin Gumbau - mgumbau at iciq.es > Responsable Informatic > dels grups teorics > de Quimica Computacional > del ICIQ > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > -- > If I traveled to the end of the rainbow > As Dame Fortune did intend, > Murphy would be there to tell me > The pot's at the other end. -- Martin Gumbau - mgumbau at iciq.es Responsable Informatic dels grups teorics de Quimica Computacional del ICIQ
