Are you using write-behind? Can you post your volume spec files? avati 2008/10/24, Michael Di Domenico <mdidomenico4 at gmail.com>: > > I've setup an eight node server stripe using gluster 1.4.0pre5 using the > stripe example from the wiki. Each of these eight nodes has a 100Mbit > ethernet card and a single hard disk. > I've connected them all together using a gigabit switch and I have a > gigabit workstation connected, with gluster mounted and running fine. > > However, when i try to do a dd test to the disk "dd if=/dev/zero of=test1 > bs=1024k count=1000", I'm only seeing 10MB/sec over the transfer. > > I would suspect the data to stripe evenly across all the disks/nodes, > effectively giving me at least over 50MB/sec in combined throughput. > > I'm I confused on what the stripe translator does, or did I do something > wrong? > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > -- If I traveled to the end of the rainbow As Dame Fortune did intend, Murphy would be there to tell me The pot's at the other end. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://zresearch.com/pipermail/gluster-users/attachments/20081025/99a10ba4/attachment.htm
