gluster over infiniband....

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey guys,

I am somewhat new to infiniband so this question is Gluster related but not entirely limited to gluster.  When you have more than one infiniband card in your system, and you start gluster how do you tell it which fabric to participate in?

Any help would be greatly appreciated.

--Mark T.


Best,
Mark F. True

Mark F. True
RAID Inc.
5 Branch Street, 2nd Floor
Methuen, MA 01844
Direct (800) 330-7335 x161
Cell (978) 886-2184
mtrue at raidinc.com<mailto:mtrue at raidinc.com>


This e-mail and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to whom they are addressed. This communication may contain material protected by Corporate Trade Secrets. If you are not the intended recipient or the person responsible for delivering the e-mail for the intended recipient, be advised that you have received this e-mail in error and that any use, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you believe you have received this e-mail in error, please immediately notify RAID, Inc. by telephone at 978-683-6444.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://zresearch.com/pipermail/gluster-users/attachments/20081024/c458c2f8/attachment.htm 


[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux