-------- Original-Nachricht -------- > Datum: Wed, 27 Aug 2008 10:08:03 +0400 > Von: "Raghavendra G" <raghavendra.hg at gmail.com> > An: Steve <steeeeeveee at gmx.net> > CC: gluster-users at gluster.org > Betreff: Re: Problems starting Gluster server > its exactly glusterfs--mainline--2.5--patch-793. We were suspecting > patch-794 might have caused the problem. > I am in no way an Arch guru. How to get/revert to patch 793? > On Wed, Aug 27, 2008 at 9:31 AM, Steve <steeeeeveee at gmx.net> wrote: > > > > > -------- Original-Nachricht -------- > > > Datum: Wed, 27 Aug 2008 08:09:19 +0530 > > > Von: "Harshavardhana Ranganath" <harsha at zresearch.com> > > > An: Steve <steeeeeveee at gmx.net> > > > CC: gluster-users at gluster.org > > > Betreff: Re: Problems starting Gluster server > > > > > Hi Steve, > > > > > > It's a typo it should have been glusterfs--mainline--2.5-patch-793 > > > > > I see. > > > > glusterfs--mainline--3.0-patch-320 works for me. All the functionality I > > tested do work. It reports to be: > > --- > > glusterfs 1.4.0qa36 built on Aug 27 2008 03:18:30 > > Repository revision: glusterfs--mainline--3.0--patch-320 > > --- > > Wait a second. The client did not survive the night. Maybe I stopped it > > before leaving the system. I don't remember (it was late or should I say > > early?). But this morning it is not running any more. The server process > is > > still there. Let me try now to compile > glusterfs--mainline--2.5-patch-793... > > > > No! glusterfs--mainline--2.5-patch-796 does not work for me (is > patch-796 > > good enough or must it be exactly patch-793?): > > --- > > nemesis ~ # /usr/sbin/glusterfsd -N -l /dev/stdout -L DEBUG -f > > /etc/glusterfs/glusterfs-server.vol > > 2008-08-27 07:25:34 D [glusterfs.c:167:get_spec_fp] glusterfs: loading > spec > > from /etc/glusterfs/glusterfs-server.vol > > 2008-08-27 07:25:34 D [spec.y:107:new_section] parser: New node for > 'brick' > > 2008-08-27 07:25:34 D [xlator.c:115:xlator_set_type] xlator: attempt to > > load file /usr/lib/glusterfs/1.3.11/xlator/storage/posix.so > > 2008-08-27 07:25:34 E [xlator.c:120:xlator_set_type] xlator: > > dlopen(/usr/lib/glusterfs/1.3.11/xlator/storage/posix.so): > > /usr/lib/glusterfs/1.3.11/xlator/storage/posix.so: cannot dynamically > load > > executable > > 2008-08-27 07:25:34 E [spec.y:123:section_type] parser: failed to set > the > > node type > > 2008-08-27 07:25:34 E [spec.y:243:file_to_xlator_tree] parser: yyparser > () > > exited with YYABORT > > 2008-08-27 07:25:34 E [glusterfs.c:190:xlator_graph_get] glusterfs: > > specification file parsing failed, exiting > > 2008-08-27 07:25:34 E [glusterfs.c:538:main] glusterfs: Unable to get > > xlator graph > > nemesis ~ # > > --- > > glusterfs 1.3.11 built on Aug 27 2008 07:19:54 > > Repository revision: glusterfs--mainline--2.5--patch-796 > > --- > > Looking at the compile output from mainline--2.5--patch-796 I still see > > (did not see that with mainline--3.0): > > --- > > > /usr/lib/gcc/i686-pc-linux-gnu/4.3.1/../../../../i686-pc-linux-gnu/bin/ld: > > warning: cannot find entry symbol _start; defaulting to 0000000008048d00 > > --- > > > > To summarize: mainline--3.0--patch-320 works. mainline--2.5--patch-796 > does > > not work. > > > > > > > Regards > > > > > // SteveB > > > > > > > On Wed, Aug 27, 2008 at 6:39 AM, Steve <steeeeeveee at gmx.net> wrote: > > > > > > > > > > > -------- Original-Nachricht -------- > > > > > Datum: Tue, 26 Aug 2008 09:42:28 +0400 > > > > > Von: "Raghavendra G" <raghavendra.hg at gmail.com> > > > > > An: Steve <steeeeeveee at gmx.net> > > > > > CC: gluster-users at gluster.org > > > > > Betreff: Re: Problems starting Gluster server > > > > > > > > > Hi Steve, > > > > > Can you try with glusterfs--mainline--3.0--patch-793 and confirm > it > > > works > > > > > for you? > > > > > > > > > Where can I get patch-793? The highest patch I see in 3.0 is > patch-320 > > > > > > > > > > > > > regards, > > > > > > > > > // SteveB > > > > > > > > > > > > > On Mon, Aug 25, 2008 at 9:29 PM, Steve <steeeeeveee at gmx.net> > wrote: > > > > > > > > > > > Hello > > > > > > > > > > > > While trying to start Gluster server I get the following error: > > > > > > 2008-08-25 19:26:29 D [glusterfs.c:167:get_spec_fp] glusterfs: > > > loading > > > > > spec > > > > > > from /etc/glusterfs/glusterfs-server.vol > > > > > > 2008-08-25 19:26:29 D [spec.y:107:new_section] parser: New node > for > > > > > 'brick' > > > > > > 2008-08-25 19:26:29 D [xlator.c:115:xlator_set_type] xlator: > > attempt > > > to > > > > > > load file /usr/lib/glusterfs/1.3.11/xlator/storage/posix.so > > > > > > 2008-08-25 19:26:29 E [xlator.c:120:xlator_set_type] xlator: > > > > > > dlopen(/usr/lib/glusterfs/1.3.11/xlator/storage/posix.so): > > > > > > /usr/lib/glusterfs/1.3.11/xlator/storage/posix.so: cannot > > > dynamically > > > > > load > > > > > > executable > > > > > > 2008-08-25 19:26:29 E [spec.y:123:section_type] parser: failed > to > > > set > > > > > the > > > > > > node type > > > > > > 2008-08-25 19:26:29 E [spec.y:243:file_to_xlator_tree] parser: > > > yyparser > > > > > () > > > > > > exited with YYABORT > > > > > > 2008-08-25 19:26:29 E [glusterfs.c:190:xlator_graph_get] > glusterfs: > > > > > > specification file parsing failed, exiting > > > > > > 2008-08-25 19:26:29 E [glusterfs.c:538:main] glusterfs: Unable > to > > > get > > > > > > xlator graph > > > > > > > > > > > > My glusterfs-server.vol file is very simple: > > > > > > /etc/glusterfs/glusterfs-server.vol > > > > > > volume brick > > > > > > type storage/posix # POSIX FS translator > > > > > > option directory /mnt/glusterfs # Export this directory > > > > > > end-volume > > > > > > volume server > > > > > > type protocol/server > > > > > > option transport-type tcp/server # For TCP/IP transport > > > > > > option client-volume-filename > /etc/glusterfs/glusterfs-client.vol > > > > > > subvolumes brick > > > > > > option auth.ip.brick.allow * # Allow access to "brick" volume > > > > > > end-volume > > > > > > > > > > > > > > > > > > Can any one help me to solve the problem? I really don't know > where > > > to > > > > > > look. > > > > > > > > > > > > // SteveB > > > > > > -- > > > > > > GMX startet ShortView.de. Hier findest Du Leute mit Deinen > > > Interessen! > > > > > > Jetzt dabei sein: > > > > > > http://www.shortview.de/wasistshortview.php?mc=sv_ext_mf at gmx > > > > > > > > > > > > _______________________________________________ > > > > > > Gluster-users mailing list > > > > > > Gluster-users at gluster.org > > > > > > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > Raghavendra G > > > > > > > > > > A centipede was happy quite, until a toad in fun, > > > > > Said, "Prey, which leg comes after which?", > > > > > This raised his doubts to such a pitch, > > > > > He fell flat into the ditch, > > > > > Not knowing how to run. > > > > > -Anonymous > > > > > > > > -- > > > > Psssst! Schon das coole Video vom GMX MultiMessenger gesehen? > > > > Der Eine f?r Alle: http://www.gmx.net/de/go/messenger03 > > > > > > > > _______________________________________________ > > > > Gluster-users mailing list > > > > Gluster-users at gluster.org > > > > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > > > > > > > > > > > > > -- > > > Harshavardhana > > > [y4m4 on #gluster at irc.freenode.net] > > > "Samudaya TantraShilpi" > > > Z Research Inc - http://www.zresearch.com > > > > -- > > GMX startet ShortView.de. Hier findest Du Leute mit Deinen Interessen! > > Jetzt dabei sein: > > http://www.shortview.de/wasistshortview.php?mc=sv_ext_mf at gmx > > > > _______________________________________________ > > Gluster-users mailing list > > Gluster-users at gluster.org > > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > > > -- > Raghavendra G > > A centipede was happy quite, until a toad in fun, > Said, "Prey, which leg comes after which?", > This raised his doubts to such a pitch, > He fell flat into the ditch, > Not knowing how to run. > -Anonymous -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
