-------- Original-Nachricht -------- > Datum: Wed, 27 Aug 2008 07:31:45 +0200 > Von: "Steve" <steeeeeveee at gmx.net> > An: > CC: gluster-users at gluster.org > Betreff: Re: Problems starting Gluster server > > -------- Original-Nachricht -------- > > Datum: Wed, 27 Aug 2008 08:09:19 +0530 > > Von: "Harshavardhana Ranganath" <harsha at zresearch.com> > > An: Steve <steeeeeveee at gmx.net> > > CC: gluster-users at gluster.org > > Betreff: Re: Problems starting Gluster server > > > Hi Steve, > > > > It's a typo it should have been glusterfs--mainline--2.5-patch-793 > > > I see. > > glusterfs--mainline--3.0-patch-320 works for me. All the functionality I > tested do work. It reports to be: > --- > glusterfs 1.4.0qa36 built on Aug 27 2008 03:18:30 > Repository revision: glusterfs--mainline--3.0--patch-320 > --- > Wait a second. The client did not survive the night. Maybe I stopped it > before leaving the system. I don't remember (it was late or should I say > early?). But this morning it is not running any more. The server process is > still there. Let me try now to compile glusterfs--mainline--2.5-patch-793... > > No! glusterfs--mainline--2.5-patch-796 does not work for me (is patch-796 > good enough or must it be exactly patch-793?): > --- > nemesis ~ # /usr/sbin/glusterfsd -N -l /dev/stdout -L DEBUG -f > /etc/glusterfs/glusterfs-server.vol > 2008-08-27 07:25:34 D [glusterfs.c:167:get_spec_fp] glusterfs: loading > spec from /etc/glusterfs/glusterfs-server.vol > 2008-08-27 07:25:34 D [spec.y:107:new_section] parser: New node for > 'brick' > 2008-08-27 07:25:34 D [xlator.c:115:xlator_set_type] xlator: attempt to > load file /usr/lib/glusterfs/1.3.11/xlator/storage/posix.so > 2008-08-27 07:25:34 E [xlator.c:120:xlator_set_type] xlator: > dlopen(/usr/lib/glusterfs/1.3.11/xlator/storage/posix.so): > /usr/lib/glusterfs/1.3.11/xlator/storage/posix.so: cannot dynamically load executable > 2008-08-27 07:25:34 E [spec.y:123:section_type] parser: failed to set the > node type > 2008-08-27 07:25:34 E [spec.y:243:file_to_xlator_tree] parser: yyparser () > exited with YYABORT > 2008-08-27 07:25:34 E [glusterfs.c:190:xlator_graph_get] glusterfs: > specification file parsing failed, exiting > 2008-08-27 07:25:34 E [glusterfs.c:538:main] glusterfs: Unable to get > xlator graph > nemesis ~ # > --- > glusterfs 1.3.11 built on Aug 27 2008 07:19:54 > Repository revision: glusterfs--mainline--2.5--patch-796 > --- > Looking at the compile output from mainline--2.5--patch-796 I still see > (did not see that with mainline--3.0): > --- > /usr/lib/gcc/i686-pc-linux-gnu/4.3.1/../../../../i686-pc-linux-gnu/bin/ld: > warning: cannot find entry symbol _start; defaulting to 0000000008048d00 > --- > > To summarize: mainline--3.0--patch-320 works. mainline--2.5--patch-796 > does not work. > mainline--3.0--patch-322 works as well: --- nemesis ~ # /usr/sbin/glusterfsd -N -l /dev/stdout -L DEBUG -f /etc/glusterfs/glusterfs-server.vol 2008-08-27 07:45:56 W [glusterfs.c:605:main] glusterfsd: starting /usr/sbin/glusterfsd 2008-08-27 07:45:56 D [glusterfs.c:263:_get_specfp] glusterfsd: loading volume specfile /etc/glusterfs/glusterfs-server.vol given volume specfile +----- 1: volume brick 2: type storage/posix 3: option directory /mnt/glusterfs 4: end-volume 5: 6: volume server 7: type protocol/server 8: option transport-type tcp 9: option client-volume-filename /etc/glusterfs/glusterfs-client.vol 10: subvolumes brick 11: option auth.addr.brick.allow * 12: end-volume +----- 2008-08-27 07:45:56 D [spec.y:177:new_section] parser: New node for 'brick' 2008-08-27 07:45:56 D [xlator.c:119:xlator_set_type] xlator: attempt to load file /usr/lib/glusterfs/1.4.0qa36/xlator/storage/posix.so 2008-08-27 07:45:56 D [spec.y:202:section_type] parser: Type:brick:storage/posix 2008-08-27 07:45:56 D [spec.y:249:section_option] parser: Option:brick:directory:/mnt/glusterfs 2008-08-27 07:45:56 D [spec.y:331:section_end] parser: end:brick 2008-08-27 07:45:56 D [spec.y:177:new_section] parser: New node for 'server' 2008-08-27 07:45:56 D [xlator.c:119:xlator_set_type] xlator: attempt to load file /usr/lib/glusterfs/1.4.0qa36/xlator/protocol/server.so 2008-08-27 07:45:56 D [spec.y:202:section_type] parser: Type:server:protocol/server 2008-08-27 07:45:56 D [spec.y:249:section_option] parser: Option:server:transport-type:tcp 2008-08-27 07:45:56 D [spec.y:249:section_option] parser: Option:server:client-volume-filename:/etc/glusterfs/glusterfs-client.vol 2008-08-27 07:45:56 D [spec.y:316:section_sub] parser: child:server->brick 2008-08-27 07:45:56 D [spec.y:249:section_option] parser: Option:server:auth.addr.brick.allow:* 2008-08-27 07:45:56 D [spec.y:331:section_end] parser: end:server 2008-08-27 07:45:56 W [glusterfs.c:728:main] glusterfsd: running in pid 27534 2008-08-27 07:45:56 D [transport.c:104:transport_load] transport: attempt to load file /usr/lib/glusterfs/1.4.0qa36/transport/socket.so 2008-08-27 07:45:56 D [server-protocol.c:6267:init] server: defaulting limits.transaction-size to 4194304 ^C nemesis ~ # /usr/sbin/glusterfsd -V glusterfs 1.4.0qa36 built on Aug 27 2008 07:40:56 Repository revision: glusterfs--mainline--3.0--patch-322 Copyright (c) 2006, 2007, 2008 Z RESEARCH Inc. <http://www.zresearch.com> GlusterFS comes with ABSOLUTELY NO WARRANTY. You may redistribute copies of GlusterFS under the terms of the GNU General Public License. nemesis ~ # --- > > > Regards > > > // SteveB > > > > On Wed, Aug 27, 2008 at 6:39 AM, Steve <steeeeeveee at gmx.net> wrote: > > > > > > > > -------- Original-Nachricht -------- > > > > Datum: Tue, 26 Aug 2008 09:42:28 +0400 > > > > Von: "Raghavendra G" <raghavendra.hg at gmail.com> > > > > An: Steve <steeeeeveee at gmx.net> > > > > CC: gluster-users at gluster.org > > > > Betreff: Re: Problems starting Gluster server > > > > > > > Hi Steve, > > > > Can you try with glusterfs--mainline--3.0--patch-793 and confirm it > > works > > > > for you? > > > > > > > Where can I get patch-793? The highest patch I see in 3.0 is patch-320 > > > > > > > > > > regards, > > > > > > > // SteveB > > > > > > > > > > On Mon, Aug 25, 2008 at 9:29 PM, Steve <steeeeeveee at gmx.net> wrote: > > > > > > > > > Hello > > > > > > > > > > While trying to start Gluster server I get the following error: > > > > > 2008-08-25 19:26:29 D [glusterfs.c:167:get_spec_fp] glusterfs: > > loading > > > > spec > > > > > from /etc/glusterfs/glusterfs-server.vol > > > > > 2008-08-25 19:26:29 D [spec.y:107:new_section] parser: New node > for > > > > 'brick' > > > > > 2008-08-25 19:26:29 D [xlator.c:115:xlator_set_type] xlator: > attempt > > to > > > > > load file /usr/lib/glusterfs/1.3.11/xlator/storage/posix.so > > > > > 2008-08-25 19:26:29 E [xlator.c:120:xlator_set_type] xlator: > > > > > dlopen(/usr/lib/glusterfs/1.3.11/xlator/storage/posix.so): > > > > > /usr/lib/glusterfs/1.3.11/xlator/storage/posix.so: cannot > > dynamically > > > > load > > > > > executable > > > > > 2008-08-25 19:26:29 E [spec.y:123:section_type] parser: failed to > > set > > > > the > > > > > node type > > > > > 2008-08-25 19:26:29 E [spec.y:243:file_to_xlator_tree] parser: > > yyparser > > > > () > > > > > exited with YYABORT > > > > > 2008-08-25 19:26:29 E [glusterfs.c:190:xlator_graph_get] > glusterfs: > > > > > specification file parsing failed, exiting > > > > > 2008-08-25 19:26:29 E [glusterfs.c:538:main] glusterfs: Unable to > > get > > > > > xlator graph > > > > > > > > > > My glusterfs-server.vol file is very simple: > > > > > /etc/glusterfs/glusterfs-server.vol > > > > > volume brick > > > > > type storage/posix # POSIX FS translator > > > > > option directory /mnt/glusterfs # Export this directory > > > > > end-volume > > > > > volume server > > > > > type protocol/server > > > > > option transport-type tcp/server # For TCP/IP transport > > > > > option client-volume-filename /etc/glusterfs/glusterfs-client.vol > > > > > subvolumes brick > > > > > option auth.ip.brick.allow * # Allow access to "brick" volume > > > > > end-volume > > > > > > > > > > > > > > > Can any one help me to solve the problem? I really don't know > where > > to > > > > > look. > > > > > > > > > > // SteveB > > > > > -- > > > > > GMX startet ShortView.de. Hier findest Du Leute mit Deinen > > Interessen! > > > > > Jetzt dabei sein: > > > > > http://www.shortview.de/wasistshortview.php?mc=sv_ext_mf at gmx > > > > > > > > > > _______________________________________________ > > > > > Gluster-users mailing list > > > > > Gluster-users at gluster.org > > > > > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > > > > > > > > > > > > > > > > > > -- > > > > Raghavendra G > > > > > > > > A centipede was happy quite, until a toad in fun, > > > > Said, "Prey, which leg comes after which?", > > > > This raised his doubts to such a pitch, > > > > He fell flat into the ditch, > > > > Not knowing how to run. > > > > -Anonymous > > > > > > -- > > > Psssst! Schon das coole Video vom GMX MultiMessenger gesehen? > > > Der Eine f?r Alle: http://www.gmx.net/de/go/messenger03 > > > > > > _______________________________________________ > > > Gluster-users mailing list > > > Gluster-users at gluster.org > > > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > > > > > > > > -- > > Harshavardhana > > [y4m4 on #gluster at irc.freenode.net] > > "Samudaya TantraShilpi" > > Z Research Inc - http://www.zresearch.com > > -- > GMX startet ShortView.de. Hier findest Du Leute mit Deinen Interessen! > Jetzt dabei sein: > http://www.shortview.de/wasistshortview.php?mc=sv_ext_mf at gmx > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users -- GMX startet ShortView.de. Hier findest Du Leute mit Deinen Interessen! Jetzt dabei sein: http://www.shortview.de/wasistshortview.php?mc=sv_ext_mf at gmx
