Re: [Gluster-users] "du" and "df -hT" commands output mismatch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As of now we don't have way to solve it indefinitely.
There may be a number of ways accounting mismatch can happen.
To solve each way, we need to identify how it happened (the IOs that
went through, their order and the timing)
with this we need to understand what change is necessary and implement that.
This has to done every time we come across an issue that can cause
accounting mismatch.
Most of the changes might affect the performance. That is a down side.
And we don't have a way to collect the above necessary information.

To do the above requirements, we don't have enough bandwidth.
If anyone from the community is interested, they can contribute to it.
We are here to help with them out.

On Mon, Jul 22, 2019 at 1:12 PM Mauro Tridici <mauro.tridici@xxxxxxx> wrote:
>
> Hi Hari,
>
> I hope that the crawl will run at most for a couple of days.
> Do you know if there is a way to solve the issue definitely ?
>
> GlusterFS version is 3.12.14.
> You can find below some additional info.
>
> Volume Name: tier2
> Type: Distributed-Disperse
> Volume ID: a28d88c5-3295-4e35-98d4-210b3af9358c
> Status: Started
> Snapshot Count: 0
> Number of Bricks: 12 x (4 + 2) = 72
> Transport-type: tcp
>
> Many thanks,
> Mauro
>
> On 22 Jul 2019, at 09:16, Hari Gowtham <hgowtham@xxxxxxxxxx> wrote:
>
> Hi,
> Yes the above mentioned steps are right.
> The way to find if the crawl is still happening is to grep for
> quota_crawl in the processes that are still running.
> # ps aux | grep quota_crawl
> As long as this process is alive, the crawl is happening.
>
> Note: crawl does take a lot of time as well. And it happens twice.
>
> On Fri, Jul 19, 2019 at 5:42 PM Mauro Tridici <mauro.tridici@xxxxxxx> wrote:
>
>
> Hi Hari,
>
> thank you very much for the fast answer.
> I think that the we will try to solve the issue disabling and enabling quota.
> So, if I understand I have to do the following actions:
>
> - save on my notes the current quota limits;
> - disable quota using "gluster volume quota /tier2 disable” command;
> - wait a while for the crawl (question: how can I understand that crawl is terminated!? how logn should I wait?);
> - enable quota using  "gluster volume quota /tier2 enable”;
> - set again the previous quota limits.
>
> Is this correct?
>
> Many thanks for your support,
> Mauro
>
>
>
> On 19 Jul 2019, at 12:48, Hari Gowtham <hgowtham@xxxxxxxxxx> wrote:
>
> Hi Mauro,
>
> The fsck script is the fastest way to resolve the issue.
> The other way would be to disable quota and once the crawl for disable
> is done, we have to enable and set the limits again.
> In this way, the crawl happens twice and hence its slow.
>
> On Fri, Jul 19, 2019 at 3:27 PM Mauro Tridici <mauro.tridici@xxxxxxx> wrote:
>
>
> Dear All,
>
> I’m experiencing again a problem with gluster file system quota.
> The “df -hT /tier2/CSP/sp1” command output is different from the “du -ms” command executed against the same folder.
>
> [root@s01 manual]# df -hT /tier2/CSP/sp1
> Filesystem     Type            Size  Used Avail Use% Mounted on
> s01-stg:tier2  fuse.glusterfs   25T   22T  3.5T  87% /tier2
>
> [root@s01 sp1]# du -ms /tier2/CSP/sp1
> 14TB /tier2/CSP/sp1
>
> In the past, I used successfully the quota_fsck_new-6.py script in order to detect the SIZE_MISMATCH occurrences and fix them.
> Unfortunately, the number of sub-directories and files saved in /tier2/CSP/sp1 grew so much and the list of SIZE_MISMATCH entries is very long.
>
> Is there a faster way to correct the mismatching outputs?
> Could you please help me to solve, if it is possible, this issue?
>
> Thank you in advance,
> Mauro
>
>
>
>
>
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users@xxxxxxxxxxx
> https://lists.gluster.org/mailman/listinfo/gluster-users
>
>
>
>
> --
> Regards,
> Hari Gowtham.
>
>
>
>
>
> --
> Regards,
> Hari Gowtham.
>
>
>


-- 
Regards,
Hari Gowtham.
_______________________________________________

Community Meeting Calendar:

APAC Schedule -
Every 2nd and 4th Tuesday at 11:30 AM IST
Bridge: https://bluejeans.com/836554017

NA/EMEA Schedule -
Every 1st and 3rd Tuesday at 01:00 PM EDT
Bridge: https://bluejeans.com/486278655

Gluster-devel mailing list
Gluster-devel@xxxxxxxxxxx
https://lists.gluster.org/mailman/listinfo/gluster-devel





[Index of Archives]     [Gluster Users]     [Ceph Users]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux