3.7.19
# line filename / context / line
1 1234 xlators/mgmt/glusterd/src/glusterd-quota.c <<glusterd_remove_quota_limit>>
ret = sys_lremovexattr (abspath, QUOTA_LIMIT_KEY);
2 1243 xlators/mgmt/glusterd/src/glusterd-quota.c <<glusterd_remove_quota_limit>>
ret = sys_lremovexattr (abspath, QUOTA_LIMIT_OBJECTS_KEY);
3 6102 xlators/mgmt/glusterd/src/glusterd-utils.c <<glusterd_check_and_set_brick_xattr>>
sys_lremovexattr (path, "trusted.glusterfs.test");
4 80 xlators/storage/posix/src/posix-handle.h <<REMOVE_PGFID_XATTR>>
op_ret = sys_lremovexattr (path, key); \
5 5026 xlators/storage/posix/src/posix.c <<_posix_remove_xattr>>
op_ret = sys_lremovexattr (filler->real_path, key);
6 5101 xlators/storage/posix/src/posix.c <<posix_removexattr>>
op_ret = sys_lremovexattr (real_path, name);
7 6811 xlators/storage/posix/src/posix.c <<init>>
sys_lremovexattr (dir_data->data, "trusted.glusterfs.test");
Thanks and Regards,
Ram
From: Pranith Kumar Karampuri [mailto:pkarampu@xxxxxxxxxx]
Sent: Friday, July 07, 2017 11:54 AM
To: Ankireddypalle Reddy
Cc: Gluster Devel (gluster-devel@xxxxxxxxxxx); gluster-users@xxxxxxxxxxx
Subject: Re: gfid and volume-id extended attributes lost
On Fri, Jul 7, 2017 at 9:20 PM, Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx> wrote:
Pranith,
Thanks for looking in to the issue. The bricks were mounted after the reboot. One more thing that I noticed was when the attributes were manually set when glusterd was up then on starting the volume the attributes were again lost. Had to stop glusterd set attributes and then start glusterd. After that the volume start succeeded.
Which version is this?
Thanks and Regards,
Ram
From: Pranith Kumar Karampuri [mailto:pkarampu@xxxxxxxxxx]
Sent: Friday, July 07, 2017 11:46 AM
To: Ankireddypalle Reddy
Cc: Gluster Devel (gluster-devel@xxxxxxxxxxx); gluster-users@xxxxxxxxxxx
Subject: Re: gfid and volume-id extended attributes lost
Did anything special happen on these two bricks? It can't happen in the I/O path:
posix_removexattr() has:
0 if (!strcmp (GFID_XATTR_KEY, name)) {
1 gf_msg (this->name, GF_LOG_WARNING, 0, P_MSG_XATTR_NOT_REMOVED,
2 "Remove xattr called on gfid for file %s", real_path);
3 op_ret = -1;
4 goto out;
5 }
6 if (!strcmp (GF_XATTR_VOL_ID_KEY, name)) {
7 gf_msg (this->name, GF_LOG_WARNING, 0, P_MSG_XATTR_NOT_REMOVED,
8 "Remove xattr called on volume-id for file %s",
9 real_path);
10 op_ret = -1;
11 goto out;
12 }I just found that op_errno is not set correctly, but it can't happen in the I/O path, so self-heal/rebalance are off the hook.
I also grepped for any removexattr of trusted.gfid from glusterd and didn't find any.
So one thing that used to happen was that sometimes when machines reboot, the brick mounts wouldn't happen and this would lead to absence of both trusted.gfid and volume-id. So at the moment this is my wild guess.
On Fri, Jul 7, 2017 at 8:39 PM, Ankireddypalle Reddy <areddy@xxxxxxxxxxxxx> wrote:
Hi,
We faced an issue in the production today. We had to stop the volume and reboot all the servers in the cluster. Once the servers rebooted starting of the volume failed because the following extended attributes were not present on all the bricks on 2 servers.
1) trusted.gfid
2) trusted.glusterfs.volume-id
We had to manually set these extended attributes to start the volume. Are there any such known issues.
Thanks and Regards,
Ram
***************************
Legal Disclaimer******************** ******* "This communication may contain confidential and privileged material for the
sole use of the intended recipient. Any unauthorized review, use or distribution
by others is strictly prohibited. If you have received the message by mistake,
please advise the sender by reply email and delete the message. Thank you."
******************************
****************************** **********
_______________________________________________
Gluster-devel mailing list
Gluster-devel@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-devel
--Pranith
***************************
Legal Disclaimer******************** ******* "This communication may contain confidential and privileged material for the
sole use of the intended recipient. Any unauthorized review, use or distribution
by others is strictly prohibited. If you have received the message by mistake,
please advise the sender by reply email and delete the message. Thank you."
******************************
****************************** **********
--Pranith
***************************Legal Disclaimer******************** ******* "This communication may contain confidential and privileged material for thesole use of the intended recipient. Any unauthorized review, use or distributionby others is strictly prohibited. If you have received the message by mistake,please advise the sender by reply email and delete the message. Thank you."************************************************************ **********
--
_______________________________________________ Gluster-devel mailing list Gluster-devel@xxxxxxxxxxx http://lists.gluster.org/mailman/listinfo/gluster-devel
